Presentation is loading. Please wait.

Presentation is loading. Please wait.

AE 221 project The Ismail residence By Mosope Ismail Location: No 4 sharafadeen shoyege Magodo Estate Lagos Nigeria Professor: Paul Bowers.

Similar presentations


Presentation on theme: "AE 221 project The Ismail residence By Mosope Ismail Location: No 4 sharafadeen shoyege Magodo Estate Lagos Nigeria Professor: Paul Bowers."— Presentation transcript:

1 AE 221 project The Ismail residence By Mosope Ismail Location: No 4 sharafadeen shoyege Magodo Estate Lagos Nigeria Professor: Paul Bowers

2 Overview Zoning Plans Elevations Sections Perspectives and renderings Outlines: EAGLE EYE OF HOME SITE PLAN

3 Overview Zoning Plans Elevations Sections Perspectives and renderings Category : Residential (R1) Size: living area = 4,300 sq.ft each floor : Property size = 9,534 sq ft Features : side patio on property space 3D VIEW PROPERTY INFORMATION OUTLINES :

4 Overview Zoning Plans Elevations Sections Perspectives Renderings FLOOR PLANS Wall paper Wood panel finishing RENDERED VIEWS Ceiling tray frames First floor Second Floor Plan OUTLINES :

5 Overview Zoning Plans Elevations Sections Perspectives Renderings acoustic ceiling finishing tile Red and white carpet Laminate particle board ELEVATIONS RENDERED ELEVATIONS South face North face East Face OUTLINES :

6 Overview Zoning Plans Elevations Sections and Details Perspectives and Renderings DETAILS SECTIONS Wall detail Foundation Detail East Side section West side section OUTLINES :

7 Overview Zoning Plans Elevations Sections Perspectives and renderings RENDERINGS PERSPECTIVES Gym Dining Rendered Gym Rendered Dining Office Area Rendered Office Area OUTLINES :

8 CEILING TRAY FRAMING Material specialization Location Color and size Quantity Warranty and manufactures Material cost and Availability Installation and materials needed Animation (movie) What are wall tray ceiling ? :A tray ceiling is a rectangular architectural feature that is either inverted or recessed. Tray ceilings can be plain, ornate, subtle or dramatic. Lighting is commonly featured in this design, and these ceilings are often found in dining rooms, hallways and living rooms. Why do we use them?: The basic purpose of a tray ceiling is to break up an ordinary flat ceiling line and add a variation in height to create architectural interest Location: Located on the finished façade of the ceiling Color : After the white cast has been placed it can be painted any color Size is based on requirements with CaS04.2H2O, but with plastic they of standard Quantities : are based on surface area Size 14-1/8" x 7- 5/8" x 1-3/8" H Section 2 x 6 Thickness 1.5mm INFORMATION OUTLINES :

9 Material specialization Location Color and size Quantity Warranty and manufactures Material cost and Availability Installation and materials needed Animation (movie) TRAY CEILING FRAMING Manufactures: Warranty: lifetime upon installation COST!!!!! This work can be completed in 1 to 2 days. Depending on the number of labor available The typical Tray Ceiling Framing project involves tasks that are best performed by experienced professionals. Good quality Tray Ceiling Framing requires considerable experience, skill and attention to detail. Do it yourself mistakes are noticeable, may be difficulty to remedy and may actually reduce the market value of the project and your home.

10 INSTALLATION TRAY CEILING FRAMING Snap a chalk line down the ceiling and wall the width and height of the tray, then nail in a 2x4 to the chalk line. Cut 1/2" OSB to the height measurement of the tray and nail a 2x4 on the flat side flush to the factory cut edge on the OSB. Install the first run to the 2x4 on the ceiling. Take the total width measurement and subtract 3-1/2" to cut two 2x4 blocks. Put one block in each corner and then string a line from one corner to the other. Run a quick layout at 16" on center on the 2x4 on the wall and the 2x4 on the OSB. Next go to the center layout mark of the tray and adjust it to the string line, then measure the 2x4 block that is needed. Repeat this until all the blocks are in. That now completes one run of the tray ceiling. Repeat these steps to finish up. #Tape Measure # Saw # Hammer #Chalk Line # 2x4s #1/2 OSB MATERIALS OUTLINES : Material specialization Location Color and size Quantity Warranty an manufactures Material cost and Availability Installation and materials needed Materials Animation (movie)

11 Material specialization Location Specifications Material cost and Availability Installation Approvals, Inspections Animation (movie) Design approval and permits from your local building authority are usually not required for Tray Ceiling Framing. If your home is subject to homeowner association covenants, you should verify that the Tray Ceiling Framing complies with association guidelines The operation and performance of the Tray ceiling framing may be adversely affected by inexperience or poor installation techniques. Hire service providers for Tray Ceiling Framing carefully and be sure to tie payment milestones to appropriate quality checks. If you are not familiar with the materials dont try to install this yourself CONCLUSION OUTLINES :

12


Download ppt "AE 221 project The Ismail residence By Mosope Ismail Location: No 4 sharafadeen shoyege Magodo Estate Lagos Nigeria Professor: Paul Bowers."

Similar presentations


Ads by Google