1. CleanRoom /Lab equipment

2. Gowning Racks – 24˝ width, 48˝ to 84˝ length Designed for efficient storage of garments Available in stainless steel or electropolished finish – stainless steel construction offers a non-contaminating surface that eliminates particle shedding –electroplolished models feature electrochemically passivated surfaces for the most demanding requirements. Note: Racks pictured with optional hangers. double single cantilevered

3. Gowning Racks with Wire Shelving components – 14˝ and 24˝ width, 48˝ to 72˝ length, 86˝ height Incorporates standard wire shelving components with specially designed gown storage options. An economical rack option in less demanding environments. Available in chrome-plated steel and electropolished stainless steel finish. Options include shelf markers and casters. hanger slots on 2½˝ centers 1˝-diameter tubular bar mounted underneath wire shelf hooks on 1½˝ centers on all four shelf sides Note: Racks pictured with optional hangers.

4. Wall-Mounted Racks with Hanger Slots – Space Management Solutions Racks with Hanger Slots - available in lengths of 48˝ [15 hangers], 60˝ [19 hangers], or 72˝ [23 hangers]. -24˝ width. -Includes open wire top shelf for laminar flow. -Available in electopolished stainless steel or chrome finish Hangers are optional.

5. Wall-Mounted Racks with Hooks – Space Management Solutions This compact design is 14˝ in width and available in lengths of 48˝ [30 hooks], 6o˝ [38 hooks], or 72˝ [45 hooks]. Available in electropolished or chrome finish. Hangers are optional.

6. Wall-Mounted Racks with Hanger Tube – Space Management Solutions Features a 1˝ diameter tubular bar which mounts easily to underside of wire shelf and comes in 18˝ width, and lengths of 48˝, 60˝, and 72˝. Available in electropolished or chrome finish. Wire design facilitates laminar flow. Hangers are optional.

7. Hangers - Chrome, brush finish, or electropolished stainless steel. Open loop hangers -Works on all gowning racks. Two piece Hangers -Use with non-removable hanger gowning racks. -Top component is affixed to the gowning rack, while the bottom component is removable. Closed Loop Hangers -Use with tubular gowning rack, and are not removable from the rack. even our hangers are made right here at our plant in Delaware, USA

8. Hanger Bar Kits Hanger Bar Kits -Retrofit existing shelving into freestanding or wall-mounted gowning racks. -Hanger slots on 2½˝ centers. -24˝ shelf width required. Wall Mount Tubular Racks -Accommodates both closed loop and open loop hangers. -Width 18˝, length ranges from 48˝ to 72˝.

9. Solid Stainless Steel Gowning Benches Heavy-duty benches include flanged steel foot plates for attachment to the floor. Available in brushed 304 stainless steel or elctropolished finish. Widths of 9˝ and 12˝, lengths up to 84˝, height 17˝.

10. Gowning Benches with Undershelf Storage Available with perforated or solid seat. Wire undershelf offer optional bootie storage. Unit comes complete with seat, legs, foot plates and one wire undershelf. [additional wire shelves and dividers are optional] Available in No. 4 electropolished or brushed finish. Seating area is 18˝ wide, undershelf is 14˝ wide, length up to 72˝ and height 19˝.

11. Wire Gowning Benches Economical gowning bench with wire shelving components, offers 62% laminar flow. Perfect for less demanding environments or for use during construction as the room is brought into clean. Units feature four 18˝ legs with foot plates, one 3-sided channel frame, and one wire shelf. Available in 14˝ width, 18˝ height and up to 72˝ lengths.

12. Wire Shelving Quad-Truss ® Wire Shelving -Patented Quad-Truss ® system makes shelves up to 25% stronger -Provides a retaining ledge for increased strength and product retension. Quad-Adjust ® Wire Shelving -Special interlocking corners fit in slots of collars mounted to split sleeves. -Allows the addition or removal of a shelf without disassembling the entire unit. -Features the same strong Quad-Truss ® design.

13. Wire Carts Open wire construction promotes higher visibility and permits greater air cirrculation, which reduces dust and contamination build-up. Posts are numbered on 1˝ increments to ensure fast, level assembly allowing maximum flexibility for cart configuration. Numerous choice of finish, accessories and sizes.

14. Security Units Full size and half size models available. Features Quad-Truss ® wire shelving for strength and durability. Numerous finishes and accessories to choose from. Stationary or mobile option. Our SpecFAB ® department can customize any cart to fit your unique environment needs. Custom built for Abbott Labs

15. Security Modules –NEW Converts portion of shelving unit into a lockable enclosed security unit. More than one unit can be added to an existing shelving unit depending on the units overall height. Consists of a back panel, side panels and door(s). Hinged or flip-up door option. (shelving unit sold separately)

16. Adjustable Post Wire Wall Mount System The adjustable wall mount provides wall storage and facilitates laminar flow. Use with standard wire shelves (sold separately). Designed to hold up to four tiers. Shelf width from 14˝ to 24˝ and post height from 14˝ to 63˝. Available in chrome and stainless steel.

17. adjusTable ® Work Surface System Create a work surface system in the configuration of your choice by adding overshelves, undeshelves and accessories. Surfaces are available with solid or perforated tops, brushed or electropolished finish. Table base available in chrome or stainless steel. Available sizes are 24˝ 0r 30˝ width and 36˝ or 60˝ length.

18. Stainless Steel Tables – custom sizes available Type 304 stainless steel available with solid or perforated tops. Perforated tops have ¾˝ perforations on 1˝ centers, allowing for 40% laminar flow. Brushed or electropolished finish. All Cleanroom tables are alcohol- wiped and cleanroom bagged. Standard table bases are C-frame or H-frame. Undershelves optional. C-frame H-frame

19. Spec-Master® Lab Worktables 14 or 16 gauge stainless steel top. Available with an adjustable undershelf or tubular base frame. Right and left ends are turned down 90˚ providing a flat edge so tables can be placed end to end. Sound deadening insulation tape runs between hat channel and table top. Feature our patented uni-lok® system which provides greater strength and a bullnose edge on front and rear (without backsplash) shown with optional drawer and casters

20. Stainless Steel Wall Mounted Tables Available in 16 or 14 gauge stainless steel. Integral sink bowls, drawers, and end splashes available. Optional Latex sound deadening. Facilitates small rolling cabinets which can be moved in and out easily.

21. Tables with Sinks Tables with sinks are available through our SpecFAB® Division. Select a solid top table and choose an appropriate sink size. -We have standard bowl sizes and single bowl sink locations to help reduce cist and lead times. Backsplashes are available in standard 4½˝ or 6˝. Customize your table with end splashes, optional edges, cutouts, overshelves and undershelves.

22. Workstations Open wire workstations offer 62% laminar flow. Shelves feature Eagles patented QuadTruss® design for superior strength and durability. Mobile Computer Workstations Come standard with keyboard drawer with optional mouse shelf and casters available. Chrome or stainless steel finish. Stationary Workstations available in electropolished stainless steel or chrome finish. Optional keyboard drawer available. Stationary Workstations feature a C-frame table base Mobile Workstation

23. Vertical Storage Cabinets 18-gauge stainless steel cabinet body. Three shelves adjustable on 4˝ vertical centers 20-gauge stainless steel hinged doors with transverse rod handles featuring keyed locks. Available in 36˝ and 48˝ lengths. Fat top or slanted top option available. Optional 5˝ plate casters with brake available.

24. Roll Bag Dispensers – custom sizes also available An effective means of dispensing rolls of bags or film. Establish protocol by color of cleanroom waste, avoiding inadvertent mixing of non-compatible items. Standard unit consists of two 14˝ x 48˝ wire shelves, one 3-sided channel frame, eight removable dispensing bars and four 74˝ posts with 30˝ outrigger feet for stability Dispensing bars are adjustable on 1˝ increments. Available in stainless steel or chrome finish.

25. Shoe Racks Wire shelves offer the optimum combination of laminar flow and ventilation for the storage of cleanroom shoes. Rods and tabs run through the shelves to create cubbies for each pair of shoes. Optional snap-on plastic shelf markers are available for identification of each storage unit. Available in electropolished stainless steel and chrome finish. Footplates are included for fastening the unit to the floor.

26. Lab Sinks FN Series Sinks -14 gauge stainless steel. All bowls are 14˝ deep and have 5/8˝ radius corners, both verticle and horizontal. Legs crossbraced front-to-back and side-to-side for increased stability. One, two, three, or four compartments, with or without drainboards. 314 Series Sinks -Deep drawn sinks have a generous radius and are rectangular for maximum capacity. Legs are galvanized, 1 ˝ diameter and welded adjacent to sink bowl for maximum stability and support. FN-1 compartment without drainboards FN-1 compartment with double drainboards 314-3 compartment with double drainboards

27. Counter Drop-In Self Rim Sinks 304 series stainless steel. Come standard with mounting hardware, swivel faucet and 1½˝ basket drain. Available in one, two, or three compartment. Faucet holes are punched on 4˝ centers. Numerous bowl sizes available.

28. Hand Sinks – The Clean Leader Type 304 stainless steel all-welded construction. Deep-drawn, one-piece seamless bowls. Models vary from the traditional hand sink w/faucet to the electronic hand sink with soap and towel dispenser and hot water heater. Available in wall-mount or pedestal style with foot/knee valves. Most bowls allow for optional MICROGARD® antimicrobial protection which retards the growth of a broad range of bacteria.

29. Stainless Steel Countertops 16 or 14 gauge, type 304 or 316 stainless steel. -Other gauges available to meet the function and chemical resistant demands of highly specialized labs. Standard front edge square or box marine, unless otherwise specified. Back and end splashes are manufactured per specification. Fabricated sink bowls available in most any size and depth with single or multiple compartments. Both L-shaped and U-shaped tops are available per your drawings.

30. Stainless Steel Overlays 20 gauge type 304 stainless steel construction with satin finish. Effortless installation, no fasteners required. Durable finish allowing easy cleanup. Economical upgrade to existing surface. Custom sizes and material gauges available.