1. Garmin GPS III Plus Setup for Data Collection

2. Objective Select settings appropriate for each project

3. Summary of Topics Power Time Zone Memory Track Logs Settings

4. Check Battery Indicator Level Satellite Status Page Press Page

5. Waypoint Setup

6. Display “Main Menu” Check Memory Note:File NameData Type Note:File NameData Type WaypointsWaypoints Active Track LogTrack Log Positions Saved Track LogTrack Log Positions Note:File NameData Type Note:File NameData Type WaypointsWaypoints Active Track LogTrack Log Positions Saved Track LogTrack Log Positions Press Menu Twice

7. Scroll to Setup in Main Menu “Setup” highlighted

8. Set Time Zone Scroll to Time Tab to Set Format and Local Time Zone

9. Scroll to Waypoints in Main Menu Press Quit to go back to Main Menu “Waypoints” highlighted

10. Waypoints Page: Check Waypoint Memory Max: 500 Waypoints Press Enter

11. Select “Delete All” PressMenu Scroll up or down

12. PressEnter Displays Cleared Waypoint Memory

13. Track Log Setup

14. Display “Main Menu” Press Menu Twice Press Quit to go back to Main Menu OR...

15. Scroll Track Logs in Main Menu “Track Logs” highlighted

16. Track Logs Page: Check Active Log Memory Max in Active Log: 1900 Track Log Positions Max in Saved Log: 250 Track Log Positions Max Track Logs: 10 Max in Active Log: 1900 Track Log Positions Max in Saved Log: 250 Track Log Positions Max Track Logs: 10 Press Enter

17. Display Track Log Options Press Menu to display Track Log Sub-Menu

18. Clear Active Log PressEnter FYI - “Delete All” clears Active Log and Saved Logs

19. Verify Empty Active Log Memory

20. Display “Setup Logging” PressMenu PressEnter

21. To Modify a Field in “Setup Logging” Highlight Field Press Enter

22. Setup Logging – Record Mode Ends collection Collects until filled Collects until “Off” selected, will selected, will overwrite overwrite Ends collection Collects until filled Collects until “Off” selected, will selected, will overwrite overwrite

23. Setup Logging - Time Max: 1900 track log positions for Active Log Approximate collection time: 1 second Interval Value – 30 min 2 second Interval Value – 60 min 5 second Interval Value – 2.5 hours Max: 1900 track log positions for Active Log Approximate collection time: 1 second Interval Value – 30 min 2 second Interval Value – 60 min 5 second Interval Value – 2.5 hours Position collected automatically based on a time interval

24. 1 Vs. 5 Second Interval Data Map View 1 sec interval 5 sec interval

25. 1 Vs. 5 Second Interval Data 1 second interval 5 second interval

26. Review of Topics Power Time Zone Memory Track Logs Settings

27. *Where to Change Units - Step 1 PressMenuTwice

28. *Where to Change Units - Step 2

29. Pre-field Summary: Receiver Setup Check BatteriesCheck Batteries Set Time to Local Time ZoneSet Time to Local Time Zone Delete ALL WaypointsDelete ALL Waypoints CLEAR Active TrackCLEAR Active Track Set Logging Interval to TimeSet Logging Interval to Time Set Interval Value (e.g., 1-5 seconds)Set Interval Value (e.g., 1-5 seconds)

30. Waypoints: Collecting Data with“Hot Key” Mark

31. Collect “Hot Key” Waypoint -All values frozen -No values stored yet -All values frozen -No values stored yet Press and hold Enter (Enter/Mark)

32. Modify Mark Waypoint Screen (Optional) Current position DO NOT EDIT- needed for ArcView Waypoint Symbol Waypoint Name, max 6 characters

33. Change Waypoint Symbol Use Rocker Keypad Highlight Waypoint Symbol Press Enter

34. Change Waypoint Name Highlight Waypoint Name Use Rocker Keypad Press Enter

35. Store Mark Waypoint Highlight “Done” Use Rocker Keypad Press Enter

36. Display “Main Menu” Press Menu Twice

37. “Waypoints” highlighted Press Enter Verify Stored Waypoint

38. Track Logs: Collecting Data with the Active Track

39. Open Track Logs Page Press Enter

40. Display “Track Log Options” PressMenu

41. Display “Setup Logging” PressMenu PressEnter

42. Start 1 st Track Collection by Setting Record Mode to “Fill” Highlight Field Press Enter

43. Stop 1 st Track Collection by Setting Record Mode to “Off” Highlight Field Press Enter

44. Check Memory Press Quit

45. DO NOT CHOOSE “Save Active Log” This option saves: - only most significant positions - maximum 250 positions - maximum 250 positions This option saves: - only most significant positions - maximum 250 positions - maximum 250 positions

46. Start 2 nd Track Collection by Setting Record Mode to “Fill” Highlight Field Press Enter

47. Stop 2 nd Track Collection by Setting Record Mode to “Off” Highlight Field Press Enter

48. View Track Logs on Map Page 1 st Track 2nd Track Press Page to get to Map Page back to Main Menu

49. Check Memory After Collecting 2 nd Track Note memory used increase as additional tracks are collected