1. TLA

2. Replacing The Battery On the Back of the pager press in this button while moving the door away from the pager, then lift up. On the Back of the pager press in this button while moving the door away from the pager, then lift up. Negitive (-) end goes on the spring Negitive (-) end goes on the spring After the battery is in close the battery door and slide back towards the pager After the battery is in close the battery door and slide back towards the pager

3. Turning The Pager On Press and hold the button for 1 second. Press and hold the button for 1 second. You will hear an alert from the pager indicating it turning on. You will hear an alert from the pager indicating it turning on. You will see the pre-programed message appear on the display You will see the pre-programed message appear on the display The standby screen will come on. The standby screen will come on.

4. Standby Screen Shows current time and date. Shows current time and date. Shows if there are unread messages. Shows if there are unread messages. Shows if your alert is on audible or vibrate Shows if your alert is on audible or vibrate Shows a Low Battery Indicator Shows a Low Battery Indicator

5. Standby Status Symbols Time hh:mm Time hh:mm Date dd.mm.yy Date dd.mm.yy Unread Message Unread Message Audible Alert Audible Alert Alert Off Alert Off Vibrate Vibrate Low Battery Low Battery Memory Full Memory Full

6. Pager Option Screen Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen. Use or to scroll through the option screen. Use to enter into the particular option. Use to enter into the particular option.

7. Standby Status Symbols Archive Archive Alarm Function Alarm Function Alert Section Alert Section Display Options Display Options Time Setting and Timed Off Time Setting and Timed Off Delete All Messages Delete All Messages Off Off

8. Turning The Pager Off Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen and stop on the symbol. Use or to scroll through the option screen and stop on the symbol. Use to enter into the option. Use to enter into the option. Once you push the button you will see and a flashing Once you push the button you will see and a flashing?. Press again to turn the pager off.

9. TLA Setting The Time And Date

10. Setting the Date and Time Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen and stop on the symbol. Use or to scroll through the option screen and stop on the symbol. Use to enter into the option. Use to enter into the option.

11. Time Function Screen When this screen first comes up the will start flashing. When this screen first comes up the will start flashing. To set the time press To set the time press

12. Time Function Screen Hour When this screen first comes up the hour will start flashing. When this screen first comes up the hour will start flashing. Use or to set the correct hour. Use or to set the correct hour. –**note** If using a 12 hour clock go past 12 to go from am to pm or pm to am. Once the correct hour is on the display press to move to the next step. Once the correct hour is on the display press to move to the next step.

13. Time Function Screen Minutes (tens position) Now the Minutes (tens position) will start flashing. Now the Minutes (tens position) will start flashing. Use or to set the correct Minutes (tens position). Use or to set the correct Minutes (tens position). Once the correct Minutes (tens position) is on the display press to move to the next step. Once the correct Minutes (tens position) is on the display press to move to the next step.

14. Time Function Screen Minutes (ones position) Now the Minutes (ones position) will start flashing. Now the Minutes (ones position) will start flashing. Use or to set the correct Minutes (ones position). Use or to set the correct Minutes (ones position). Once the correct Minutes (ones position) is on the display press to move to the next step. Once the correct Minutes (ones position) is on the display press to move to the next step.

15. Time Function Screen Date (Day) Now the Date (Day position) will start flashing. Now the Date (Day position) will start flashing. Use or to set the correct Day Use or to set the correct Day Once the correct Day is on the display press to move to the next step. Once the correct Day is on the display press to move to the next step.

16. Time Function Screen Date (Month) Now the Date (Month position) will start flashing. Now the Date (Month position) will start flashing. Use or to set the correct Month Use or to set the correct Month Once the correct Month is on the display press to move to the next step. Once the correct Month is on the display press to move to the next step.

17. Time Function Screen Date (Year) Now the Date (Year position) will start flashing. Now the Date (Year position) will start flashing. Use or to set the correct Year Use or to set the correct Year Once the correct Year is on the display press to move to the next step. Once the correct Year is on the display press to move to the next step.

18. Time Function Screen 12/24 Hour Clock Now the Clock will start flashing. Now the Clock will start flashing. Use or to set the time format you want (12 hour or 24 hour) Use or to set the time format you want (12 hour or 24 hour) Once the correct time format is on the display press for 2 seconds to exit the Time Function Screen to the Standby Screen. Once the correct time format is on the display press for 2 seconds to exit the Time Function Screen to the Standby Screen.

19. TLA Sleep Mode

20. Pager Sleep Mode Sets a “shut off” time and a “wake” time for the pager Sets a “shut off” time and a “wake” time for the pager Saves Battery Life Saves Battery Life You will not receive pages while it is off You will not receive pages while it is off Example of use: Example of use: –You get off of work every day at 5pm –You get in to work at 8am –Set the pager Sleep Mode from 5:30pm to 7:30am so you save battery life

21. Setting Sleep Mode Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen and stop on the symbol. Use or to scroll through the option screen and stop on the symbol. Use to enter into the option. Use to enter into the option.

22. Time Function Screen When this screen first comes up the will start flashing. When this screen first comes up the will start flashing. Use or to scroll through the screen and stop on the symbol. Use or to scroll through the screen and stop on the symbol. Use to enter into the option. Use to enter into the option.

23. Sleep Function Screen When this screen first comes up the will start flashing. When this screen first comes up the will start flashing. Use or turn the option on or off Use or turn the option on or off If the times are displayed on the bottom of the screen then the function is on, if not then it is off If the times are displayed on the bottom of the screen then the function is on, if not then it is off Once you push or the time will either appear or disappear Once you push or the time will either appear or disappear

24. Sleep Function Screen If you have chosen to turn the function on then once the times are displayed on the bottom press the button to start editing the times. If you have chosen to turn the function on then once the times are displayed on the bottom press the button to start editing the times. If you are turning this feature off then simply hold the button down for 2 seconds to go back to the Standby Screen If you are turning this feature off then simply hold the button down for 2 seconds to go back to the Standby Screen

25. Sleep Function Screen The Left Hand Time is the Start time (or shut off time) and the Right Hand Time is the End time (or the wake time) The Left Hand Time is the Start time (or shut off time) and the Right Hand Time is the End time (or the wake time) Now just like setting the time, first the Hour will start to flash. Now just like setting the time, first the Hour will start to flash. Use or to change the hour. Use or to change the hour. Once you have the correct starting hour press to move to the next digit. Once you have the correct starting hour press to move to the next digit. Continue this process until you have both the Shut Off Time and Wake Time adjusted properly. Continue this process until you have both the Shut Off Time and Wake Time adjusted properly. When finished hold for 2 seconds to go back to the Standby screen When finished hold for 2 seconds to go back to the Standby screen

26. Sleep Function Final Now if you selected to have the sleep timer on you will now see this displayed on your standby screen. Now if you selected to have the sleep timer on you will now see this displayed on your standby screen.

27. TLA Alarm

28. Pager Alarm Sets an Alarm on your pager Like an Alarm Clock. Sets an Alarm on your pager Like an Alarm Clock.

29. Setting Sleep Mode Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen and stop on the symbol. Use or to scroll through the option screen and stop on the symbol. Use to enter into the option. Use to enter into the option.

30. Sleep Function Screen When this screen first comes up the will start flashing if the option is on, a will flash if the function is turned off When this screen first comes up the will start flashing if the option is on, a will flash if the function is turned off Use or turn the option on or off Use or turn the option on or off If the time is displayed on the bottom of the screen then the function is on, if not then it is off If the time is displayed on the bottom of the screen then the function is on, if not then it is off Once you push or the time will either appear or disappear Once you push or the time will either appear or disappear

31. Sleep Function Screen The Alarm Time is displayed. The Alarm Time is displayed. Now just like setting the time, first the Hour will start to flash. Now just like setting the time, first the Hour will start to flash. Use or to change the hour. Use or to change the hour. Once you have the correct starting hour press to move to the next digit. Once you have the correct starting hour press to move to the next digit. Continue this process until you have the time adjusted properly. Continue this process until you have the time adjusted properly. When finished hold for 2 seconds to go back to the Standby screen When finished hold for 2 seconds to go back to the Standby screen

32. Alarm Function Final Now if you selected to have the alarm on you will now see this displayed on your standby screen. Now if you selected to have the alarm on you will now see this displayed on your standby screen.

33. TLA Setting Pager Alert

34. Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen and stop on the symbol. Use or to scroll through the option screen and stop on the symbol. Use to enter into the option. Use to enter into the option.

35. Pager Alert Screen The Alert Number is Flasing at this time. The Alert Number is Flasing at this time. Use or to change the alert (you will hear the different tones as you are scrolling. Use or to change the alert (you will hear the different tones as you are scrolling. As your scrolling you may see. This is the vibrate function. As your scrolling you may see. This is the vibrate function. You may also see. This means you have shut off the alert completely. You will get no alert when you receive a page with this function turned on. As a short cut you can hold down the button for 4 seconds to do the turn the alert on and off. You may also see. This means you have shut off the alert completely. You will get no alert when you receive a page with this function turned on. As a short cut you can hold down the button for 4 seconds to do the turn the alert on and off. Continue this process until you have the alert adjusted properly. Continue this process until you have the alert adjusted properly. When finished hold for 2 seconds to go back to the Standby screen When finished hold for 2 seconds to go back to the Standby screen

36. TLA Display Options

37. Setting Display Options Press to bring up the Pager Option Screen. Press to bring up the Pager Option Screen. Use or to scroll through the option screen and stop on the symbol. Use or to scroll through the option screen and stop on the symbol. Use to enter into the option. Use to enter into the option.

38. Pager Display Options The Font Size Option is flashing at this time. The Font Size Option is flashing at this time. Use or to change Font Size. Use or to change Font Size. Once the Correct Font Size is selected press to move on to the next option. Once the Correct Font Size is selected press to move on to the next option. ABC

39. Pager Display Options The Contrast Option is flashing at this time. The Contrast Option is flashing at this time. Use or to adjust the level of contrast on the pager. Use or to adjust the level of contrast on the pager. When your satisfied with you selection press to move on to the next option, or hold it down for 2 seconds to go back to the main screen When your satisfied with you selection press to move on to the next option, or hold it down for 2 seconds to go back to the main screen ABC

40. TLA Receiving Messages and Reviewing Stored Messages

41. Receiving Messages When receiving a message you pager will alert you as you selected. (See Alert Settings) When receiving a message you pager will alert you as you selected. (See Alert Settings) The Alert will sound for 8 seconds or until you acknowledge the page. The Alert will sound for 8 seconds or until you acknowledge the page. You can acknowledge the page by pressing any of the buttons on the pager during the 8 second alert You can acknowledge the page by pressing any of the buttons on the pager during the 8 second alert Your message will automatically display at this time. Your message will automatically display at this time.

42. Receiving Messages If you are away from your pager and do not acknowledge the page during the 8 second alert a symbol will appear on your standby screen indicating you have a message waiting for you. If you are away from your pager and do not acknowledge the page during the 8 second alert a symbol will appear on your standby screen indicating you have a message waiting for you. A reminder alert will sound every 5 min until you read the message. A reminder alert will sound every 5 min until you read the message. To display and scroll through your read or unread messages press or. To display and scroll through your read or unread messages press or. If the message length exceeds one screen press button again to scroll through the message. If the message length exceeds one screen press button again to scroll through the message. A symbol will appear at the end of the message. A symbol will appear at the end of the message.

43. Stored Messages Your pager will also store up to 32 messages. Your pager will also store up to 32 messages. Once you get to 32 messages a symbol will display indicating that your pager’s memory is full. Once you get to 32 messages a symbol will display indicating that your pager’s memory is full. If you receive a new message after this then your oldest read message will be deleted. If you receive a new message after this then your oldest read message will be deleted. If you have more than 32 unread messages then the pager will delete your oldest unread message. If you have more than 32 unread messages then the pager will delete your oldest unread message.

44. Stored Messages To scroll through your read and unread stored messages press or. To scroll through your read and unread stored messages press or.

45. TLA Message Options

46. Once you have a message displayed you can press to bring up the message options. Once you have a message displayed you can press to bring up the message options. The first symbol that shows is this is the “Read Message” Symbol and if you want to go back to reading the message, simply press the button. The first symbol that shows is this is the “Read Message” Symbol and if you want to go back to reading the message, simply press the button.

47. Delete Message Option To scroll through the other 2 options press either or. To scroll through the other 2 options press either or. The symbol is to delete the message. Simply press the button on the symbol to delete your current message. A ? will appear asking for confirmation to delete the message. The symbol is to delete the message. Simply press the button on the symbol to delete your current message. A ? will appear asking for confirmation to delete the message. To confirm and delete the message simply press the button twice. To confirm and delete the message simply press the button twice. To cancel the deletion press the or button to return to the previous screen. To cancel the deletion press the or button to return to the previous screen.

48. Archive Message Option Press either or to get to the symbol. Press either or to get to the symbol. The symbol is to archive the message, and prevent it from being deleted. The symbol is to archive the message, and prevent it from being deleted. Your pager can store up to 32 messages. Your pager can store up to 32 messages. If you archive 30 messages then your pager will only be able to receive 2 messages. (See Receiving Messages Section) If you archive 30 messages then your pager will only be able to receive 2 messages. (See Receiving Messages Section) Press on the Symbol to archive the message. Press on the Symbol to archive the message. A ? will appear asking for confirmation for this function. A ? will appear asking for confirmation for this function. To cancel the archive option press the or button to return to the previous screen. To cancel the archive option press the or button to return to the previous screen. To confirm the archive option press the button twice. To confirm the archive option press the button twice.

49. TLA End Of Presentation