1. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology NX9.0 - Install Guide [1]

2. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology What is NX? [2] NX is a software used in the broad area such as product design, developing process and manufacturing. Main modules of NX are solid & feature modeling, assembly modeling, drafting, freeform modeling and NX knowledge fusion author.

3. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Minimum recommended specifications (NX 9 ver.) [3] Following specifications are recommended for NX 9 installation OSWindows 7 64bit CPUIntel i5 or i7 multiple core Memory4GB VGARefer supported graphics file* * You can download at the http://nsl.gist.ac.kr/Intranet/Instruments.htmlhttp://nsl.gist.ac.kr/Intranet/Instruments.html * You can use GeForce series and Intel CPU HD Graphic series. But it is not supported.

4. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Install procedure [4] 1.Select ‘Install NX’ 2.Select the install language => ‘English’ or ‘Korean’ 1 2

5. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Install procedure cont. [5] 3.Select next button at the ‘Install Shield Wizard’ 4.Select ‘Typical type’ and click the next button 3 4

6. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Install procedure cont. [6] 5.Establish the install route and put next button 6.Write MECHA-PC instead of xxxx. ( License Server – 28000@MECHA-PC ) Then, put next button 56

7. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Install procedure cont. [7] 7.NX language selection => ‘English’ or ‘Korean’ and next 8.Select install button after checking the install information 87

8. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Install procedure cont. [8] 9. Wait until installation is done 10. Click finish button after install completing 9 10

9. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Patch (NX9.0.x will given) [9] 1.Run a NX 9.0.x Launch.exe and select ‘Install NX Update’ 2.Wait until ‘ 계속하려면 아무 키나 누르십시오 …’ on the dos. After then, you can quit dos 1 2

10. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Error [10] 1.Start and check the NX after finishing installation. When you see the following pop up while stating NX, then do following actions. 1

11. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Error cont. [11] 2.Click ‘Start – Program – Siemens NX 9.0 – NX 라이선스 도구 – 라이선스 도구 ’ 3.Click ‘ 번들 설정 ’ 2 3

12. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Error cont. [12] 4.Select NX Academic Perpetual License which is consist of ‘3d to 2d flattener’ and ‘adv_assemblies’ and etc. And click ‘ 적용 ’ button 5.And after doing all of them, restart NX program. When you see the figure 5, then all of the NX installation is done. 4 5

13. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology NX 9.0 Documents Installation [13] 1.Put new Documentation CD and select ‘Install Documentation’ 2.Click next button at ‘Install Shield Wizard’ 1 2

14. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology NX 9.0 Documents Installation cont. [14] 3.Establish the install route and put next button 4.Select install button and after installing, click finish button 34

15. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Materials [15] We have following materials NX Installation and Documentation CDs Installation guide (pdf file) Two books and pdf file of basic training manual Movie files of NX example These are keeping in 3D Micro-manufacturing Laboratory. All of them are managed by Jun Hee Choi who is M.S in 3DML. If someone want to install NX, then come to our lab and ask to Jun Hee All ISO files (Install & Documentation) are in the \\TFSSERVER\Utility and etc\ 유틸리티 \ \\TFSSERVER\Utility and etc\ 유틸리티 \

16. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Warranty [16] SPACE solution warranties this software without charge for a period of a year from date of purchase. SPACE solution warranties following maintenance 1.License Transfer 2.New Version Upgrade 3.S/W Technique and error support (On cable, On remote) There are no implied warranties of S/W except above maintenance Warranty is valid from 2014.10.01 to 2015.09.30

17. SPIE Optics + Photonics 2009 3D Micromanufacturing Lab. School of Mechatronics Gwangju Institute of Science and Technology Contact address [17] Seogyun KIM / 김 서 균 차장 SPACE solution Sales Dept. / Deputy General Manager Tel : 82.2.2027.5936 Fax : 82.2.2027.5954 Mobile : 82.10.7436.3777 E-mail : gyuni24@spacesolution.kr Homepage : http://www.spacesolution.krhttp://www.spacesolution.kr Seulgi Han / 한 슬 기 대리 SPACE solution Technical support Help desk Tel : 82.2.2027.5945 Fax : 82.2.2027.5954 Mobile : 82.10.7176.6729 E-mail : hansk1030@spacesolution.kr Homepage : http://www.spacesolution.krhttp://www.spacesolution.kr