1. New Features/Functions Ver.4 (Edition-7)
KX-TDE/NCP
New Features/Functions Ver.4 (Edition-7)
Panasonic System Networks CO.,LTD.

2. New Features/Functions - 1“
New Features/Functions - 1
The new features/functions are available from,
- KX-NCP500/1000 MPR Ver.4.
- KX-TDE100/200/600 MPR Ver.4.
Note
VoIP Expansion
- IP-TSW Speech Path
New MPR Required
- 64ch SIP Trunk
- VoIP Channel Capacity
- DECT-CS on NCP
Network Feature Enhancement
- Message Waiting
A/K is needed
- Absent Message
- Called party name display before answer
- Call Waiting
Network ICD-Group (UCD is supported)
Improved Conference Group Function
Improved Conference Features
Paging to DECT
Call-FWD CLIP
Improved Centralized VM Function

3. New Features/Functions - 2“
New Features/Functions - 2
The new features/functions are available from,
- KX-NCP500/1000 MPR Ver.4.
- KX-TDE100/200/600 MPR Ver.4.
Note
Improved Call-FWD N/A Function
(Ringing after C-FWD)
A/K is needed
Improved CA integration
Alternative call if VoIP call fails
Improve VoIP (H.323) Connection
- Support Non-Fast Connect
- H323-ID registration
Other Improvements
- BSS Operation Programming
Reserve Bit Function

4. VoIP Expansion - IP-TSW Speech Path - 64ch SIP Trunk
- VoIP Channel Capacity
- DECT-CS on NCP

5. VoIP Expansion “ Ver.4 Improvements PBX TDE600 TDE100/200 NCP1000
Version
Ver.3
Ver.4
Ver.2
IP-TSW Speech Path (ch) (*1) 49
113
SIP-Trunk (ch) 32 64 8
IP-PT
SIP Ext (ch)
128
40 IP-PT
32 SIP
IP-CS (Units) 16
*1) New MPR card is needed.
Trunk/Extension
Protocol
Ver.4
TTL
IP-Trunk
H.323
32ch (*2)
64 ch
SIP Trunk
64ch
IP-Extension
IP-PT
128ch
128 ch
SIP-Ext.
IP-CS
128ch (16 units)
*2) H.323 IP-Trunk of NCP500 expands 32ch, same as NCP1000, TDE100/200/600.

6. IP-TSW Speech Path (113 path) -1“
IP-TSW Speech Path (113 path) -1
New MPR Card + Ver.3 = 49 path
Old MPR Card + Ver.4 = 49 path
New MPR Card + Ver.4 = 113 path CO
IP Trunk
MPR
Legacy
DSP
IP-Ext.
IP CS
How to identify new H/W
New MPR card is needed.

7. IP-TSW Speech Path (113 path) - 2“
IP-TSW Speech Path (113 path) - 2
How to identify new H/W
Old H/W
Should be “XA”
New H/W

8. 64ch SIP Trunk -1 “ Ver 4.0 Ver 4.0 TDE100/200/600 16ch x 2 16ch x 4
NCP1000 Ver.2
16ch x 2
16ch x 4
NCP500 Ver.2
8ch x 1
16ch x 4
Only Software upgrade.

9. 64ch SIP Trunk -2 “ Ver 2/3 Ver 4.0 16ch x 2 64ch x 1
Ver.2/3 supports 32ch SIP Trunk.
Two contracts/accounts (16ch + 16ch)
Ver.4 supports 64ch SIP Trunk.
Supports 64ch by one contract/account
New PCMC Channel Attribute Programming Menu

10. VoIP Channel Capacity - 1“
VoIP Channel Capacity - 1
DSP Power
DSP Resource
Source -1
Source - 2
DSP Resource
Traditional (CO/Ext.)
IP-Trunk (G711) 2 3
IP-Trunk (G729) 5
IP-Ext./IP-CS (G711) 1
IP-Ext./IP-CS (G729) 4
IP-Ext.(G711) 6
IP-Ext.(G729) 8
IP-CS (G711) 7
IP-CS (G729) 9
DSP -4
-16
-64 16 64
256
DSP-64
DSP-4/16

11. VoIP Channel Capacity - 2“
VoIP Channel Capacity - 2
The max. number of simultaneous telephone calls (NCP1000/500).
Talking Party
NCP1000
NCP500
DSP 4 16 64
IP-Trunk
 IP-PT
G711  G711 8 32
G711  G729 2 12 42
G729  G729
 SIP 5
 IP-CS 3 18 50 9 35 1 27
IP-Trunk 
Legacy Ext
G711 44 28
G729
SIP Trunk
[Restriction Key]
H.323 Trunk
DSP Power-1
Number of TDM-IP Channels
Number of
Trunks
Number of Handsets.
DSP Power-2

12. VoIP Channel Capacity - 3“
VoIP Channel Capacity - 3
The max. number of simultaneous telephone calls (NCP1000/500).
Talking Party
NCP1000
NCP500
DSP 4 16 64
Legacy-CO
 IP-PT
G711
G729
 SIP
 IP-CS
Legacy-Ext 44 28
[Restriction Key]
DSP Power-1
Number of TDM-IP Channels
Number of
Trunks
Number of Handsets.
DSP Power-2

13. VoIP Channel Capacity - 4“
VoIP Channel Capacity - 4
The max. number of simultaneous telephone calls (NCP1000/500).
Talking Party
NCP1000
NCP500
DSP 4 16 64
IP-CS
 IP-PT
G711  G711 8 32 56
G711  G729 3 12 42
G729  G729 2
 SIP
 IP-CS
[Restriction Key]
DSP Power-1
Number of TDM-IP Channels
Number of
Trunks
Number of Handsets.
DSP Power-2

14. VoIP Channel Capacity - 5“
VoIP Channel Capacity - 5
The max. number of simultaneous telephone calls (TDE100/200/600).
Talking Party
TDE100/200
TDE600
DSP 4 16 64
IP-Trunk
 IP-PT
G711  G711 - 32
G711  G729 12 42
G729  G729 8
 SIP
 IP-CS 18 50 9 35 5 27
IP-Trunk 
Legacy Ext
G711
G729
SIP Trunk
[Restriction Key]
H.323 Trunk
DSP Power-1
Number of TDM-IP Channels
Number of
Trunks
Number of Handsets.
DSP Power-2

15. VoIP Channel Capacity - 6“
VoIP Channel Capacity - 6
The max. number of simultaneous telephone calls (TDE100/200/600).
Talking Party
TDE100/200
TDE600
DSP 4 16 64
Legacy-CO
 IP-PT
G711 -
113
G729
 SIP
 IP-CS
Legacy-Ext
[Restriction Key]
DSP Power-1
Number of TDM-IP Channels
Number of
Trunks
Number of Handsets.
DSP Power-2

16. VoIP Channel Capacity - 7“
VoIP Channel Capacity - 7
The max. number of simultaneous telephone calls (TDE100/200/600).
Talking Party
TDE100/200
TDE600
DSP 4 16 64
IP-CS
 IP-PT
G711  G711 - 32 56
G711  G729 12 42
G729  G729 8
 SIP
 IP-CS
[Restriction Key]
DSP Power-1
Number of TDM-IP Channels
Number of
Trunks
Number of Handsets.
DSP Power-2

17. DECT-CS on NCP “ The max. number of CS/PS. CS factor Ver.2 Ver.4
KX-TDA0158 2 4 3 5
KX-TDA0141/0155 1 8 7 11
KX-NCP0158 6 16
Max. CS factor 12 32
Max. PS 64

18. Network Feature Enhancement

19. Network Feature Enhancement“
Network Feature Enhancement
The following features are newly supported from Ver.4
1 When calling extension in other PBX
- Leave Message Waiting
- Absent Message Display
- Called party name display before answer
2 When extension in other PBX is busy
- Call Waiting
- Busy Override
- Call Back
- Call Monitor
3 When extension in other PBX is DND
- DND Override, DND tone and LCD
4 Incoming call from extension in other PBX
- Ring tone (Single or Double) as extension call
- Call FWD / DND as extension call
- Automatic answer as extension call
- Extension call block by COS-COS
5 Incoming call to extension in other PBX
- Directed Call Pickup

20. Network Feature Enhancement - 1“
Network Feature Enhancement - 1
Message Waiting
A/K is needed
Ext.1001
Ext.2001
Call
VoIP-Net
Free/Busy
1- Ext.1001 calls Ext.2001 (Free)
2- Ext.2001 does not answer.
3- Press “Message Waiting” button on Ext.1001.
4- The Message Waiting LED on Ext.2001 turns Red.
- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001 receive “Busy Tone”
3- Press “Message Waiting” button on Ext.1001.
4- The Message Waiting LED on Ext.2001 turns Red.
- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.
The function works over, Extension Numbering & PBX Numbering.

21. Network Feature Enhancement - 2“
Network Feature Enhancement - 2
Absent Message Display
A/K is needed
Ext.1001
Ext.2001
1. Call
2. Send “Go Home”
VoIP-Net
Absent Message
“Go Home”
1- Ext.1001 calls Ext.2001 (Absent Message “Go Home)
2- “Go Home” is displayed on Ext.1001.
Go Home
The function works over, Extension Numbering & PBX Numbering.

22. Network Feature Enhancement - 3“
Network Feature Enhancement - 3
Calling party name display before answer (Already Supported)
Ext.2001
1. Call
2. Send “Tanaka”
VoIP-Net
Ext.1001
Tanaka
A/K is needed
1001: Tanaka
Ver.4
Internal call
Tanaka
1001
Before Ver.4
External call
1- Ext.1001 (Tanaka) calls Ext.2001
2- Calling party name (Tanaka) is displayed on Ext.2001.
The function works over, Extension Numbering & PBX Numbering.

23. Network Feature Enhancement - 4“
Network Feature Enhancement - 4
Called party name display before answer
Ext.1001
1. Call
2. Send “Tanaka”
VoIP-Net
3. Send “Honda”
Ext.2001
Honda
A/K is needed
2001: Honda
1- Ext.1001 (Tanaka) calls Ext.2001
2- Calling party name (Tanaka) is displayed on Ext.2001.
3- Called party name (Honda) is displayed on Ext.1001.
The function works over, Extension Numbering & PBX Numbering.

24. Network Feature Enhancement - 5“
Network Feature Enhancement - 5
Call Wait
Call waiting : ON
A/K is needed
3. Press “WAIT”
Ext.2001
1. Call
2. Send “Busy” Info.
VoIP-Net
4.Call Wait
Ext.1001
Talking
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001 LCD
2001: Busy
WAIT OVER C.BCK
Ext.2002
3- Press “WAIT” button.
4- Call waiting on Ext.2001.
Call waiting (Ext.2001) has to be “ON”.
The function works over, Extension Numbering & PBX Numbering.

25. Network Feature Enhancement - 6“
Network Feature Enhancement - 6
Busy Override
A/K is needed
3. Press “OVER”
Ext.2001
1. Call
2. Send “Busy” Info.
VoIP-Net
4. Override
Ext.1001
Talking
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001 LCD
2001: Busy
WAIT OVER C.BCK
Ext.2002
3- Press “OVER” button.
4- We can override (Barge-in) the communication between Ext.2001 and 2002.
The function works over, Extension Numbering & PBX Numbering.

26. Network Feature Enhancement - 7“
Network Feature Enhancement - 7
Call Monitor
A/K is needed
Ext.1001
Ext.2001
1. Call
2. Send “Busy” Info.
3. Press “5”
VoIP-Net
4. Monitor
Talking
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001 LCD
2001: Busy
WAIT OVER C.BCK
Ext.2002
3- Press “5” button.
4- We can monitor the communication between Ext.2001 and 2002.
The function works over, Extension Numbering & PBX Numbering.

27. Monitor/Busy Override“
Network Feature Enhancement - 8
Related program for Call Monitor/Busy Override
Ext.1001
Ext.2001
Busy
Monitor/Busy Override
VoIP-Net
Talking
Related program.
Ext.2002

28. Monitor/Busy Override“
Network Feature Enhancement - 9
Related program for Busy Override
Ext.1001
Ext.2001
Monitor/Busy Override
VoIP-Net
Talking
Related program.
Ext.2002

29. Network Feature Enhancement - 10“
Network Feature Enhancement - 10
Call Back
3. Press “C.BAK”
Ext.2001
Busy
1. Call
2. Send “Busy” Info.
VoIP-Net
Ext.1001
Busy
1- Ext.1001 calls Ext.2001 (Busy)
2- Ext.1001 LCD
2001: Busy
WAIT OVER C.BCK
3- Press “C-BCK” button.
4- When Ext.2001 became idle, Ext.1001 starts ring. (Call back starts)
The function works over, Extension Numbering & PBX Numbering.

30. Network Feature Enhancement - 11“
Network Feature Enhancement - 11
DND
A/K is needed
3. Press “OVER”
Ext.2001
Busy
1. Call
2. Send “DND” Info.
4. Ring
VoIP-Net
Ext.1001
DND
1- Ext.1001 calls Ext.2001 (DND)
We can see the other end set to “DND”
2- Ext.1001 LCD
2001: Do Not Disturb
OVER
- “DND” Tone on Ext.1001
3- Press “OVER” button.
4- Ext.2001 starts ringing.
The function works over, Extension Numbering & PBX code Numbering.

31. Network Feature Enhancement - 12“
Network Feature Enhancement - 12
DND
A/K is needed
3. Press “OVER”
Ext.2001
Busy
1. Call
2. Send “DND” Info.
4. Ring
VoIP-Net
Ext.1001
DND
Related program.

32. Network Feature Enhancement - 13“
Network Feature Enhancement - 13
Ring tone (Single or Double) as extension call
Ext.1001
A/K is needed
Ext.2001
Busy
1. Call
2. Ring
VoIP-Net
1- Ext.1001 calls Ext.2001
2- Ext.2001 starts ringing.
Ver.4.0 : Internal call ring tone.
Before Ver.4.0 : External call ring tone.
The function works over, Extension Numbering & PBX code Numbering.

33. Internal call Auto Answer = Enable“
Network Feature Enhancement - 14
Auto Answer
A/K is needed
Ext.1001
Ext.2001
Busy
1. Call
VoIP-Net
Internal call Auto Answer = Enable
1- Ext.1001 calls Ext.2001
2- Ext.2001 answers the call automatically.
Ver.4.0 : Possible
Before Ver. 4.0 : No possible
The function works over, Extension Numbering & PBX code Numbering.

34. Network Feature Enhancement - 15“
Network Feature Enhancement - 15
Call-FWD setting on Ext.2001
Ext.1001
A/K is needed
Ext.2001
Busy
Call
PBX-1
VoIP-Net
PBX-2
Call
Call CO
Ext.2002
We can set different C-FWD destination on Ext.2001 for external calls and other PBX call (Internal) calls.
E.g. Internal call destination: Call from Ext.1001 and Ext.2002
External call destination: Call from external (Through PBX-1)
The function works over, Extension Numbering & PBX code Numbering.

35. Network Feature Enhancement - 16“
Network Feature Enhancement - 16
Pick up call (Direct call pick up)
Ext.1001
Ext.2001
3. Pick up
2. Ring
VoIP-Net
1.Call
1- Ext.2002 calls Ext.2001
2- Ext.2001 starts ringing.
3- Ext.1001 can pick up the call on Ext.2001
How to program ?
Ext.2002
The function works over, Extension Numbering and PBX numbering.

36. The target PBX numbering plan + *“
Network Feature Enhancement - 17
Pick up call (Direct call pick up): Extension Numbering
Ext.1001
Ext.2001
3. Pick up (Press a DSS (20**412001)
2. Ring
VoIP-Net
1.Call
Access code
Ext. No
20**412001
DSS
The target PBX numbering plan + *
A/K is needed
*40 (Pick-up by group number) does not support

37. Network Feature Enhancement - 18“
Network Feature Enhancement - 18
Pick up call (Direct call pick up): PBX Numbering
Ext.1001
Ext.1001
3. Pick up (Press a DSS (72*411001)
2. Ring
PBX code 1
VoIP-Net
PBX code 2
1.Call
Access code
Ext. No
72*411001
TIE access + PBX number
DSS
A/K is needed

38. Network Feature Enhancement - 19“
Network Feature Enhancement - 19
Pick up call (Direct call pick up): CA Ver.3 (Future Plan)
Ext.2001
3. Pick up
2. Ring
VoIP-Net
Ext.1001
1.Call
CA Server
CA Ver.3
Ext.2002
Monitor
A/K is needed

39. Network Feature Enhancement - 20“
Network Feature Enhancement - 20
Paging with Pick up call (Direct call pick up)
Ext.2001
3. Pick up
PBX-1
VoIP-Net
PBX-2
Ext.1001
2. Paging
Ofiice-1
Ofiice-2
1.Call
Ext.2002 is a PBX-2 extension.
Audio port
Ext.2002
1- Ext.2001 calls Ext.2002
2- On Ext (Voice Call is available ➔ Paging)
3- Ext.1001 can pick up (72*412002) the call on Ext.2002
A/K is needed

40. Network Feature Enhancement - 21“
Network Feature Enhancement - 21
Improved Boss/Secretary function
Ext.1001
Ext.2001
Call Ext.1001
VoIP-Net
Boss
(C-FWD to Ext.2001)
Secretary
When Ext.2001 calls Ext.1001.
Ver.4.0 : Ext.1001 starts ring.
Before Ver.4.0 : Busy Tone
A/K is needed
The function works over, Extension Numbering & PBX code Numbering.

41. Network Feature Enhancement - 22“
Network Feature Enhancement - 22
Internal call Block (COS-COS setting)
Call
COS Information
Call Block
VoIP-Net
Ext.1001
COS-1
Ext.2001
COS-1
A/K is needed
Ext.1002
COS-2
Ext.1001 (COS-1) calls Ext.2001 (COS-1): Not Blocked
Ext.1002 (COS-2) calls Ext.2001 (COS-1): Blocked
The function works over, Extension Numbering & PBX code Numbering.

42. Network Feature Enhancement - 23“
Network Feature Enhancement - 23
Auto answer enable/disable by COS
Ext.2001
Call
COS Information
VoIP-Net
Ext.1001
COS-2
Auto Answer=ON
Calling Ext. Ext.2001
Ext.1001 (COS-2) Auto Answer
Ext.1002 (COS-3) Ringing
A/K is needed
Ext.1002
COS-3

43. Auto answer enable/disable by COS“
Auto answer enable/disable by COS
Internal call works this feature
Ext.2001
VoIP-Net
Ext.1001
Auto Answer=ON
Calling Ext. Ext.2001
Ext.2002 (COS-1) Auto Answer
Ext.2003 (COS-3) Ringing
Ext.1001 (COS-2) Auto Answer
Ext.1002 (COS-3) Ringing
Ext.1002
Ext.2002
COS-1
Call
Ext.2003
COS-3

44. Network ICD-Group

45. Network ICD-Group “ Before Ver.4. Ext.2001 CO VoIP-Net Call ICD-Group
Ring
Virtual PS
Ext.1003
C-FWD = 2002

46. Network ICD-Group “ Ver.4. Ext.2001 CO VoIP-Net Call ICD-Group
Ring (Already Supported)
UCD (Ver.4)
Hunt (Ver.4)
Virtual PS
Ext.1003
C-FWD = 2002
Note: Automatic Log-out is not support for Virtual PS.

47. Improved Conference Group Function

48. Before Ver.4: System Program“
Improved Conference Group Function - 1
Conference Group mode programming
Ver.4: Flexible Program
Before Ver.4: System Program

49. Improved Conference Group Function - 2“
Improved Conference Group Function - 2
Conference Group mode programming (Ver.4)
Group-1: 8-Party Conference Mode
Owner
Two-way
One way
N/A
Group-2: Broadcast
Owner
Two-way
N/A
One way
Total
32 Terminals
Group-8: 8-Party Conference Mode
Owner
Two-way

50. Improved Conference Group Function - 3“
Improved Conference Group Function - 3
Joining external participants
Before Ver.4
Owner
Conference Group
Before a conference is established, the external participant cannot join.
Owner
Conference Group
If an owner wants to have a conference with only external participants. ➔ How to achieve ?

51. 2. Conference is established.“
Improved Conference Group Function - 4
Joining external participants
Ver.4
Auto Answer mode works for conference group call on Ver.4.
Advise solution
Owner
Conference Group
3. Join
1. Call
2. Conference is established.
4. Cuts the D-PT.
D-PT or Softphone
Auto Answer = ON
- An owner establishes a group conference with physical connection D-PT or Softphone.
- An external participant joins the conference.
- The owner presses the DSS button of the D-PT twice.
- Press “Flash”/”Recall” key.
➔ Cuts the D-PT from the conference.

52. Improved Conference Group Function - 5“
Improved Conference Group Function - 5
Reserve Bit Function (0A-6)
This is PSN plan
Default (Disable)
Owner
Conference Group
Call
Auto Answer = OFF
0A-6=Disable
A D-PT (Auto Answer = Off) in conference group:
An owner establishes a group conference
➔ Compulsory D-PT Auto answer function Enable.
0A-6=Enable
The above function does not work.

53. Improved Conference Features

54. Improved Conference Features - 1“
Improved Conference Features - 1
Before Ver.4 Function
Subscriber-A
Ext.1001 CO
Owner
Subscriber-B
Three party conference.
1- Ext.1001 (Owner) holds three party conference.
Subscriber- A, Subscriber-B
2- Ext.1001 on-hooks ➔ All connection disconnects.
Customer wants to keep CO-to-CO connection.

55. Improved Conference Features - 2“
Improved Conference Features - 2
Ver.4 New Option
CO-CO call Limitation
Enable : Default (Before Ver. 4 New function)
Disable : Option (Ver. 4 New function)

56. Improved Conference Features - 3“
Improved Conference Features - 3
Ver.4 Function (CO-CO call Limitation = Disable)
1. Ext.1001 (Owner) holds three party conference.
Subscriber-A
Ext.1001 CO
Owner
Subscriber-B
2. Ext.1001 on-hooks.
3. The PBX is keeping CO-to-CO connection.
Subscriber-A
Ext.1001 CO
Owner
Subscriber-B
NB: This operation does not work for conference group call.

57. Improved Conference Features - 4“
Improved Conference Features - 4
Working scenario
Subscriber-A
Ext.1001 CO
Owner
1- Ext.1001 (Owner) holds three party conference.
Subscriber- A and Ext.1002.
2- Ext.1001 on-hooks ➔ The PBX keeps Subscriber- A and Ext.1002 connection.
Ext.1002

58. Improved Conference Features - 5“
Improved Conference Features - 5
Working scenario
Subscriber-A
Ext.1001 CO
Owner
VoIP-Net
1- Ext.1001 (Owner) holds three party conference.
Subscriber- A and Ext.1002.
2- Ext.1001 on-hooks ➔ The PBX keeps CO to Ext.1002 call.
Ext.1002

59. Improved Conference Features - 6“
Improved Conference Features - 6
Working scenario
Ext.1001
Owner
VoIP-Net
Ext.1002
Ext.1003
1- Ext.1001 (Owner) holds three party conference.
Ext.1002 and Ext.1003.
2- Ext.1001 on-hooks ➔ The PBX keeps Ext.1002 to Ext.1003 call.

60. Improved Conference Features - 7“
Improved Conference Features - 7
Not working scenario
Subscriber-A
Ext.1001 CO
Owner
Subscriber-B
1- Ext.1001 (Owner) holds four party conference.
Subscriber- A, Subscriber-B and Ext.1002.
2- Ext.1001 on-hooks ➔ All connections disconnect.
Ext.1002

61. (by using auto answer/conference)
Paging to DECT
(by using auto answer/conference)

62. 3. Speaker automatically ON“
Paging to DECT - 1
Auto-answer function for DECT
Ext.2001
Auto-Answer=ON
2. Call
1.Call Ext.2001
Ext.1001
3. Speaker automatically ON
1. Ext.1001 calls Ext.2001 (Auto-Answer=ON)
2. The PBX calls Ext.2001
3. Ext.2001 speaker phone automatically ON.
Auto-answer function also works a conference group call.

63. 3. Speaker automatically ON“
Paging to DECT - 2
Auto-answer function for Conference Group
Conference Group No.1
Ext.2001
Ext.2002
Ext.2003
2. Call
1.Dial *321#
Auto-Answer=ON
Ext.1001
4. Paging
3. Speaker automatically ON
Ext.1001 holds a conference (*321#)
2. The PBX calls pre-programmed DECT-PS
3. All DECT PS on the conference group automatically answer.
Speaker phone automatically “ON”.
4. Ext.1001 user can page.

64. “
Paging to DECT - 3
Conference Group No.1
Ext.2001
Ext.2002
Ext.2003
Ext.1001
Auto-Answer=ON
DECT user and SLT user can make conference group call as well as PT user.
- Hand over is supported for conference group call after DECT answers.
(Ver. 3 does not support hand over for conference group call.)
- One DECT-PS needs one wireless channel.
Broadcasting mode
Max. member
Max. talker
When paging starts,
Enable → 32 8
DECT-PS cannot speak at first.
Disable
DECT-PS speak at first.

65. Paging to DECT - 4 “ Reserve Bit Function (0A-7)
This is PSN plan
Default (Disable)
Owner
Conference Group
Call
Auto Answer = Off
0A-7=Disable
A PS (Auto Answer = Off) in conference group:
An owner establish a group conference
➔ Compulsory PS Auto answer function Enable.
0A-7=Enable
The above function does not work.

66. Call-FWD CLIP

67. Call-FWD CLIP - 1 (Internal call)“
Call-FWD CLIP - 1 (Internal call)
Subscriber-A
CLIP ?
Ext.1000
CLIP
ISDN
Calls
1- Ext.1000 calls Ext.1001
2- The call is re-routed to subscriber-A.
3- CLIP? Ext.1000 CLIP or Ext.1001 CLIP?
Ext.1001
CLIP
C-FWD to
Subscriber-A
The PBX sends as CLIP
The PBX sends as CLIP

68. Call-FWD CLIP - 2 (Internal call)“
Call-FWD CLIP - 2 (Internal call)
Subscriber-A
CLIP ?
Ext.1000
CLIP
ISDN
Calls
1- Ext.1000 calls Ext.6000 (ICG-D)
2- The call is re-routed to subscriber-A.
3- CLIP? Ext.1000 CLIP or Ext.2000 CLIP?
ICD-G 6000
Ext.2000
CLIP
C-FWD to
Subscriber-A
Dummy PS
Ext.1001
The PBX sends as CLIP
The PBX sends as CLIP

69. Call-FWD CLIP - 3 (External call)“
Call-FWD CLIP - 3 (External call)
Subscriber-A
Ext.1000
CLIP
C-FWD to
Subscriber-B
ISDN
Subscriber-B
1- Subscriber-A calls Ext.1000
2- The call is re-routed to subscriber-B
3- CLIP? Subscriber-A CLIP or Ext.1000 CLIP?
The PBX sends as CLIP
The PBX sends Subscriber-A CLIP as CLIP

70. Call-FWD CLIP - 4 (External call)“
Call-FWD CLIP - 4 (External call)
ICD-G 6000
Subscriber-A
Ext.1000
CLIP
ISDN
Ext.2000
CLIP
C-FWD to
Subscriber-B
Subscriber-B
Dummy PS
1- Subscriber-A calls Ext.6000 (ICG-D)
2- The call is re-routed to subscriber-B
3- CLIP? Subscriber-A CLIP or Ext.2000 CLIP?
The PBX sends as CLIP
The PBX sends Subscriber-A CLIP as CLIP

71. Improved Centralized VM Function

72. Improved Centralized VM function - 1“
Improved Centralized VM function - 1
VM transfer over network
Ext.2001 CO
PBX-1
VoIP-Net
PBX-2
1. Call
2. Press “VTR #
3. Go to Ext Mail BOX
Ext.1001
Ext.2002
Mail-BOX Ext.
(PBX-1)
(PBX-2)
(PBX-2)
Centralized VM
1. Ext.1001 receives a call.
2. Press the “VTR” button and dial remote extension number + #.
3. The call goes to Ext.2001 mail Box.

73. Improved Centralized VM function - 2“
Improved Centralized VM function - 2
VM transfer over network
2. Press “VTR #
Ext.2001 CO
PBX-1
VoIP-Net
PBX-2
1. Call
3. Go to Ext Mail BOX
Ext.1001
Ext.2002
Mail-BOX Ext.
(PBX-1)
(PBX-2)
(PBX-2)
Centralized VM
1. Ext.2001 receives a call.
2. Press the “VTR” button and dial remote extension number + #.
3. The call goes to Ext.1001 mail Box.

74. Improved Centralized VM function - 3“
Improved Centralized VM function - 3
VM transfer over network
2. Press “VTR + NDSS Button
Ext.2001 CO
PBX-1
VoIP-Net
PBX-2
1. Call
NDSS (Ext.1001)
3. Go to Ext Mail BOX
Ext.1001
Ext.2002
Mail-BOX Ext.
(PBX-1)
(PBX-2)
(PBX-2)
Centralized VM
1. Ext.2001 receives a call.
2. Press the “VTR” button and Press the NDSS button for Ext.1001.
3. The call goes to Ext.1001 mail Box.

75. Improved Centralized VM function - 4“
Improved Centralized VM function - 4
Transfer re-call Destination
Ext.2001 CO
PBX-1
VoIP-Net
PBX-2
1. Call
Centralized VM
2. Transfer to Ext.1002
Un-screened
Ext.1001
3. Does not answer
Mail-BOX Ext.
(PBX-1)
(PBX-1)
(PBX-2)
Ext.1002
C-FWD N/A to VM
Step 4.
Before Ver.4 Transfer re-call to Ext.1001
Ver.4 The call is re-routed to the Centralized VM

76. Improved Call-FWD N/A Function

77. Improved Call-FWD N/A Function - 1“
Improved Call-FWD N/A Function - 1
C-FWD N/A function before Ver.4
Ext.2001
Subscriber-A
2. Ring.
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec CO
3. Fwd to Subscriber-A
1. Call
1. Ext.2002 calls Ext.2001
2. Ext.2001 starts ringing, 15sec.
3. The call is forwarded to the subscriber-A ➔ Ext.2001 stops ringing.
Ext.2002

78. Improved Call-FWD N/A Function - 2“
Improved Call-FWD N/A Function - 2
C-FWD N/A function Ver.4
Ext.2001
Subscriber-A
2. Ring.
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec CO
3. Fwd to Subscriber-A
1. Call
1. Ext.2002 calls Ext.2001
2. Ext.2001 starts ringing, 15sec.
3. The call is forwarded to the subscriber-A
Keep ring after FWD NA to CO
Enable ➔ Ext.2001 keeps ringing.
Disable ➔ Ext.2001 stops ringing.
4. The subscriber-A and Ext.2001 can answer the call.
A/K is needed
Ext.2002

79. Improved Call-FWD N/A Function - 3“
Improved Call-FWD N/A Function - 3
C-FWD N/A function Ver.4
Ext.2001
Subscriber-A
2. Ring.
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec CO
3. Fwd to Subscriber-A
1. Call
The Keep ring after FWD NA to CO Function is available on the following CO
CO Type
Available
SIP/H.323 G/W
YES
ISDN
Analogue
W/ Reverse
W/O Reverse NO
CPC Analogue Line E1 T1
LCO
GCO/DID/E&M
Ext.2002

80. Improved Call-FWD N/A Function - 4“
Improved Call-FWD N/A Function - 4
C-FWD N/A function Ver.4
Ext.2001
Subscriber-A
2. Ring.
Call-FWD N/A to
Subscriber-A
N/A Timer=15sec CO
3. Fwd to Subscriber-A
1. Call
Ext.2001
If Ext.2001 DSS is assigned on other Ext.
1. Ext.2002 calls Ext.2001 ➔ DSS flashing.
2. 15 sec ➔ DSS flashing.
3. The call is forwarded to the Subscriber.
4. The Subscriber does not answer ➔ DSS flashing.
5. The Subscriber answers ➔ DSS turns “Red”.
Ext.2002
This situation differs from the usual DSS display.
Actually, Ext.2001 is not busy, other extension can call to Ext.2001.

81. Improved Call-FWD N/A Function - 5“
Improved Call-FWD N/A Function - 5
C-FWD N/A function Ver.4
Ext.2001
2. Ring.
Call-FWD N/A
Ext.2003
N/A Timer=15sec
If Ext.2001 is set C-FWD to Internal.
1. Call
1. Ext.2002 calls Ext.2001
2. Ext.2001 starts ringing, 15sec.
3. The call is forwarded to Ext.2003
4. Ext.2001 stops ringing.
Ext.2002
3. Fwd to Ext.2003
Ext.2003

82. Improved CA integration

83. Improved CA integration“
Improved CA integration
Send system data to CA
When CA user logs to PBX (Ver.4), the PBX send “Manager” and “CA Chat Ability” information to CA.
2. Data
1. Log-in CA
Client-1
Disable manager function from basic CA client
Disable un-necessary chat
Support from CA Ver.3

84. Improved CA integration“
Improved CA integration
Absent Message is not automatically changed.
Before Ver.4
Absent status is displayed automatically by CA when PC is not used for pre programmed time.
Not in used CA
Display changed
Customer does not like this change.
10 JUN. 09: THU
THU 09: *
PROG INFO RING MENU
PROG INFO RING MENU
Ver.4
Absent status is not displayed from Ver.4.

85. Alternative call if VoIP call is fails
(CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call)

86. Alternative call if VoIP call fails - 1“
Alternative call if VoIP call fails - 1
Standalone system
+44 (0)
Telephone cost are high.
PBX-Japan
NTT-CO
BT CO
Dials
Subscriber No.
Country code
International access code
CO access code

87. Alternative call if VoIP call fails - 2“
Alternative call if VoIP call fails - 2
Using remote PBX and VoIP and ARS function
+44 (0)
Save cost !!!
PBX-Japan
NTT-CO
BT CO
ARS=ON
TG-2
VoIP Net
PBX-UK
Modify the dialled number by ARS table.
Dials

88. Alternative call if VoIP call fails - 3“
Alternative call if VoIP call fails - 3
Using remote PBX and VoIP and ARS function
+44 (0)
If VoIP Network is Down ?
PBX-Japan
NTT-CO
BT CO
ARS=ON
TG-2
VoIP Net = Down
PBX-UK
Modify the dialled number by ARS table.
Dials

89. Checks Quick Dialling table“
Alternative call if VoIP call fails - 4
Using remote PBX and VoIP and ARS function
+44 (0)
Modify the dialled number by Quick Dial table.
A new function from Ver.4.
PBX-Japan
NTT-CO
BT CO
ARS=ON
No-response
TG-2
VoIP Net = Down
PBX-UK
Modify the dialled number by ARS table.
The call is VoIP call ?
Dials
Checks Quick Dialling table NO
YES
Re-order Tone

90. Modify the dialled number by ARS table.“
Alternative call if VoIP call fails - 5
Programming
ARS
Select “On for Local Access Operation”
Please do not select “On for any CO Access Operation”
Modify the dialled number by ARS table.

91. Alternative call if VoIP call is failed - 6“
Alternative call if VoIP call is failed - 6
Programming
Quick Dial
Need to Check
Trunk access No.
CO access No.

92. Alternative call if VoIP call fails - 7“
Alternative call if VoIP call fails - 7
Reserve Bit Function (09-6)
From TDE/NCP V4.
Default (Disable)
The alternative call function on Ver.4.
CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call
09-6=Disable
The alternative call function works.
CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ CO call
09-6=Enable
The alternative call function does not work.
CO call ➔ ARS ➔ VoIP call ➔ Failed ➔ Re-order tone

93. Improve VoIP (H.323) Connection

94. Improve VoIP (H.323) Connection - 1“
Improve VoIP (H.323) Connection - 1
Support Non-Fast Connect
H323 IP-G/W
Virtual H323 IP-G/W
Call
VoIP Net
Call
Receiving call (a non-Fast connect mode call):
Before Ver.4 : PBX does not accept the call.
Ver.4 : PBX accepts the call.
This improvement is adapted only for virtual gate way.
(Not for LPR card gate way)

95. Improve VoIP (H.323) Connection - 2“
Improve VoIP (H.323) Connection - 2
Support Non-Fast Connect
H323 IP-G/W
Virtual H323 IP-G/W
Call
VoIP Net
2. Reply
1. Call
3. Connection?
Making call:
The TDE/NCP makes a call with fast connection mode.
The other PBX replies with non fast connection mode.
Before Ver.4 : PBX does not accept this reply, disconnect the call.
Ver.4 : PBX accepts this reply
This improvement is adapted only for virtual gate way.
(Not for LPR card gate way)

96. Improve VoIP (H.323) Connection - 3“
Improve VoIP (H.323) Connection - 3
Support Non-Fast Connect
H323 IP-G/W
Virtual H323 IP-G/W
Call
VoIP Net
2. Reply
1. Call
3. H.245 Negotiation
Making call:
The TDE/NCP makes a call with fast connection mode.
The other PBX replies with non fast connection mode.
Before Ver.4 : PBX does not accept this reply, disconnect the call.
Ver.4 : Support H.245 Negotiation.
This improvement is adapted only for virtual gate way.
(Not for LPR card gate way)

97. Improve VoIP (H.323) Connection - 4“
Improve VoIP (H.323) Connection - 4
Reserve Bit Function (06-0): H323-ID registration
Default (Disable)
Gate Keeper
Registration
H323 G/W
LAN
06-0=Disable
The H323-ID registration is not possible.
06-0=Enable
The H323-ID registration is possible. (TDE Ver.2)
The PBX send “Zonename” information to the Gate keeper. (Ver.4)
The PBX send “Band Wide” information to the Gate keeper. (Ver.4)

98. Other Improvements

99. Other Improvements “ BSS Operation Programming
Before Ver.4 (System Program)
Ver.4 (COS setting)
Ext.1001 (Operator: COS-1) Mainly un-screened call transfer.
Ext.1002 (Worker: COS-2) Mainly screened call transfer.

100. PC Maintenance Console (PCMC) for Ver.4.

101. PCMC for KX-TDE/NCP Ver.4.“
PCMC for KX-TDE/NCP Ver.4.
Please use U-PCMC Ver. 6.x.x.x
KX-TDE600 Ver. 6.0.x.x or later
KX-NCP500/1000 Ver. 6.1.x.x or later
KX-TDE100/200 Ver. 6.2.x.x or later

102. Thank You Very Much
For Your Attention

103. Modification History
➔ Edition-2
Page-11
Page 72 TVR ➔ VTR
Add Page 79
Page 81 CS ➔ CA
Page 14
Page 34 Ext.2001 ➔ Ext.2002
Page 39 72* ➔ 72*412002
Page 58 CO-to-CO call ➔ CO to Ext.1002 call.
Page 59 CO-to-CO call ➔ Ext.1002 to Ext.1003 call.
Page Ext.2003 does not answer the call and the call is re-routed to VM.
➔ The call is re-routed to VM.
➔ Edition-4
Add Page 73. ５

104. ➔ Edition-5
Page-51 : (Old) - The owner presses the DSS button of the D-PT.
(New) - The owner presses the DSS button of the D-PT twice.
- Press "Flash"/"Recall" key.
Page-55 : (Old) CO-CO call Limitation
Enable : Default (Ver. 4 New function)
Disable : Option (Before Ver. 4 New function)
(New) CO-CO call Limitation
Enable : Default (Before Ver. 4 New function)
Disable : Option (Ver. 4 New function)
Page-56: (Old) Ver.4 Function (CO-CO call Limitation = Enable)
(New) Ver.4 Function (CO-CO call Limitation = Disable)
Page-72 : (Old) 2. Press “VTR ➔ (New) 2. Press “VTR #
Page-74 : Add.
Page-81 : (Old) If Ext.2001 is set C-FWD to External.
(New) If Ext.2001 is set C-FWD to Internal.
➔ Edition-6
Page-2, 20-26,30-34, 36-39, Add: A/K is needed
➔ Edition-7
Page-40 Add: A/K is needed