1. PAPSA ODU FIRMWARE UPDATE
Models: PAPSA BASIC , PAPSA PLUS , PAPSA PRO
1. Connect to update port with RS-232C Cable or 232CtoUSB Gender.
FEEDER CABLE
UPDATE PORT
RS-232C Cable or
232C to USB Gender

2. PAPSA ODU FIRMWARE UPDATE
2. Start Firmware Update Program.
4. Choose Com Port.
5. ODU Power on will automatically rewrite the software.
3. Choose hex file for ODU and open.

3. IDU FIRMWARE UPDATE Model: PAPSA PRO IDU , MOBILE IDU
1. Connect to update port with RS-232C Cable or 232CtoUSB Gender. .
UPDATE PORT
POWER CABLE
RS-232C Cable or
232C to USB Gender

4. IDU FIRMWARE UPDATE 2. Start Firmware Update Program.
4. Choose Com Port.
5. ODU Power on will automatically rewrite the software.
3. Choose hex file for ODU and open.

5. MOBILE ODU FIRMWARE UPDATE
Model: MOBILE ODU
1. Connect with update port AVR ISP down loader.
UPDATE PORT
AVR ISP DOWNLOADER

6. MOBILE ODU FIRMWARE UPDATE
2. Please disconnect with the motor cable and start AVR ISP Program.
3. Choose cancel.

7. MOBILE ODU FIRMWARE UPDATE
4. MOBILE POWER ON and click AVR ICON.
5. Choose from main tab for DEVICE and choose ATMEGA128.

8. MOBILE ODU FIRMWARE UPDATE
6. Choose from program tab for your target Mobile ODU HEX FILE.
7. Please go to Auto TAB and check same set up as below picture and click start.