1. OSHA Office of Training and Education - Revised by TEEX 12/04/07 1 Personal Protective Equipment

2. OSHA Office of Training and Education - Revised by TEEX 12/04/07 2 Protecting Employees from Workplace Hazards Employers must protect employees from workplace hazards such as machines, hazardous substances, and work procedures that can cause injury Employers must:  Use all feasible engineering and work practice controls to eliminate and reduce hazards  Then use appropriate personal protective equipment (PPE) if these controls do not eliminate the hazards Remember, PPE is the last level of control!

3. OSHA Office of Training and Education - Revised by TEEX 12/04/07 3 Engineering Controls If... The machine or work environment can be physically changed to prevent employee exposure to the potential hazard, Then... The hazard can be eliminated with an engineering control.

4. OSHA Office of Training and Education - Revised by TEEX 12/04/07 4 Engineering Controls Initial design specifications Substitute less harmful material Change process Enclose process Isolate process Ventilation Examples...

5. OSHA Office of Training and Education - Revised by TEEX 12/04/07 5 Work Practice Controls If... Employees can be removed from exposure to the potential hazard by changing the way they do their jobs, Then... The hazard can be eliminated with a work practice control.

6. OSHA Office of Training and Education - Revised by TEEX 12/04/07 6 Work Practice Controls Use of wet methods to suppress dust Personal hygiene Housekeeping and maintenance Job rotation of workers Examples...

7. OSHA Office of Training and Education - Revised by TEEX 12/04/07 7 Examples of PPE Eye - safety glasses, goggles Face - face shields Head - hard hats Feet - safety shoes Hands and arms - gloves Bodies - vests Hearing - earplugs, earmuffs

8. OSHA Office of Training and Education - Revised by TEEX 12/04/07 8 Establishing a PPE Program Procedures for selecting, providing, training, and using PPE as part of an employer’s routine operation Assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of PPE Select the proper PPE Train employees who are required to use the PPE

9. OSHA Office of Training and Education - Revised by TEEX 12/04/07 9 Training When PPE is necessary What type of PPE is necessary How to properly put on, take off, adjust and wear the PPE Limitations of the PPE Proper care, maintenance, useful life and disposal of the PPE Employees required to use PPE must be trained to know at least the following:

10. OSHA Office of Training and Education - Revised by TEEX 12/04/07 10 Training Certification !Employer shall verify employee has received and understood required training !Name of each employee trained !Date(s) of training !Identify the subject certified

11. OSHA Office of Training and Education - Revised by TEEX 12/04/07 11 Retraining !Employer has reason to believe employee does not have the required understanding and skill !Changes in the workplace !Changes in PPE !Inadequacies in employee’s knowledge

12. OSHA Office of Training and Education - Revised by TEEX 12/04/07 12 Employer Payment for PPE !On November 14, 2007 OSHA announced employer/employee responsibilities for payment of PPE !Employers are required to pay for almost all PPE required by OSHA’s general industry, construction and maritime standards >Employers already pay for approximately 95% of the employees PPE

13. OSHA Office of Training and Education - Revised by TEEX 12/04/07 13 Employer Payment for PPE !Benefits of OSHA’s new ruling: >Clear and consistent policy across OSHA’s standards >Less confusion about what PPE employers are required to pay for >Reduces workplace injury, illness and death =OSHA estimates a reduction of 21,000 fewer injuries per year

14. OSHA Office of Training and Education - Revised by TEEX 12/04/07 14 Employer Non-Paid PPE !Employers are not required by the new rule to pay for uniforms, items worn to keep clean or other items that are not PPE !The final rule contains exceptions for certain ordinary protective equipment such as: >Safety-toe footwear >Prescription safety eyewear >Everyday clothing and weather related gear >logging

15. OSHA Office of Training and Education - Revised by TEEX 12/04/07 15 Employee-Owned PPE !Employees may chooses to use PPE they own, however, employers will not need to reimburse them >Employers cannot require employees to provide their own PPE – it is voluntary by each employee >If an employee provides their own PPE, employers must ensure it is adequate protection from hazards in the workplace >Employers must pay for a replacement PPE to comply with OSHA standards >Employers do not have to pay for replacements of lost or intentionally damaged PPE

16. OSHA Office of Training and Education - Revised by TEEX 12/04/07 16 OSHA Rule Deadlines !Employers have 6 months from November 15, 2007 to comply with the Employer Payment for PPE >The Final Rule becomes effective on February 13, 2008 >The Final Rule must be implemented by May 15, 2008

17. OSHA Office of Training and Education - Revised by TEEX 12/04/07 17 Eye Protection

18. OSHA Office of Training and Education - Revised by TEEX 12/04/07 18 What are some of the causes of eye injuries? Dust and other flying particles, such as metal shavings or sawdust Molten metal that might splash Acids and other caustic liquid chemicals that might splash Blood and other potentially infectious body fluids that might splash, spray or splatter Intense light such as that created by welding and lasers

19. OSHA Office of Training and Education - Revised by TEEX 12/04/07 19 Safety Spectacles Made with metal/plastic safety frames Most operations require side shields Used for moderate impact from particles produced by such jobs as carpentry, woodworking, grinding and scaling

20. OSHA Office of Training and Education - Revised by TEEX 12/04/07 20 Goggles Protect eyes, eye sockets and the facial area immediately surrounding the eyes from impact, dust and splashes Some goggles fit over corrective lenses

21. OSHA Office of Training and Education - Revised by TEEX 12/04/07 21 Welding Shields Protect eyes from burns caused by infrared or intense radiant light and protect face and eyes from flying sparks, metal spatter and slag chips produced during welding, brazing, soldering and cutting.

22. OSHA Office of Training and Education - Revised by TEEX 12/04/07 22 Laser Safety Goggles Protect eyes from intense concentrations of light produced by lasers.

23. OSHA Office of Training and Education - Revised by TEEX 12/04/07 23 Face Shields Protect the face from nuisance dusts and potential splashes or sprays of hazardous liquids Do not protect employees from impact hazards

24. OSHA Office of Training and Education - Revised by TEEX 12/04/07 24 Head Protection

25. OSHA Office of Training and Education - Revised by TEEX 12/04/07 25 What are some of the causes of head injuries? Falling objects Bumping head against fixed objects, such as exposed pipes or beams Contact with exposed electrical conductors

26. OSHA Office of Training and Education - Revised by TEEX 12/04/07 26 Classes of Hard Hats Class A General service (e.g., mining, building construction, shipbuilding, lumbering and manufacturing) Good impact protection, but limited voltage protection Class B Electrical work Protects against falling objects, high-voltage shock and burns Class C Designed for comfort, offers limited protection Protects heads that may bump against fixed objects, but does not protect against falling objects or electrical shock

27. OSHA Office of Training and Education - Revised by TEEX 12/04/07 27 Hearing Protection

28. OSHA Office of Training and Education - Revised by TEEX 12/04/07 28 EarmuffsEarplugsCanal Caps Examples of Hearing Protectors

29. OSHA Office of Training and Education - Revised by TEEX 12/04/07 29 Foot Protection

30. OSHA Office of Training and Education - Revised by TEEX 12/04/07 30 What are some of the causes of foot injuries? Heavy objects such as barrels or tools that might roll onto or fall on employees’ feet Sharp objects such as nails or spikes that might pierce the soles or uppers of ordinary shoes Molten metal that might splash on feet Hot or wet surfaces Slippery surfaces

31. OSHA Office of Training and Education - Revised by TEEX 12/04/07 31 Safety Shoes Have impact-resistant toes and heat-resistant soles that protect against hot surfaces common in roofing, paving and hot metal industries Have metal insoles to protect against puncture wounds May be designed to be electrically conductive for use in explosive atmospheres, or nonconductive to protect from workplace electrical hazards

32. OSHA Office of Training and Education - Revised by TEEX 12/04/07 32 Metatarsal Guards A part of the shoes or strapped to the outside of shoes to protect the instep from impact and compression

33. OSHA Office of Training and Education - Revised by TEEX 12/04/07 33 Hand Protection

34. OSHA Office of Training and Education - Revised by TEEX 12/04/07 34 What are some of the hand injuries you need to guard against? Burns Bruises Abrasions Cuts Punctures Fractures Amputations Chemical Exposures

35. OSHA Office of Training and Education - Revised by TEEX 12/04/07 35 Norfoil laminate resists permeation and breakthrough by an array of toxic/hazardous chemicals Butyl provides the highest permeation resistance to gas or water vapors; frequently used for ketones (M.E.K., Acetone) and esters (Amyl Acetate, Ethyl Acetate) Types of Gloves

36. OSHA Office of Training and Education - Revised by TEEX 12/04/07 36 Viton is highly resistant to permeation by chlorinated and aromatic solvents Nitrile provides protection against a wide variety of solvents, harsh chemicals, fats and petroleum products and also provides excellent resistance to cuts, snags, punctures and abrasions Types of Gloves

37. OSHA Office of Training and Education - Revised by TEEX 12/04/07 37 Kevlar protects against cuts, slashes and abrasion Stainless steel mesh protects against cuts and lacerations Types of Gloves

38. OSHA Office of Training and Education - Revised by TEEX 12/04/07 38 Body Protection

39. OSHA Office of Training and Education - Revised by TEEX 12/04/07 39 What are some of the causes of body injuries? Intense heat Splashes of hot metals and other hot liquids Impacts from tools, machinery and materials Cuts Hazardous chemicals Contact with potentially infectious materials, like blood Radiation

40. OSHA Office of Training and Education - Revised by TEEX 12/04/07 40 Cooling VestSleeves and Apron Body Protection

41. OSHA Office of Training and Education - Revised by TEEX 12/04/07 41 Coveralls Full Body Suit Body Protection

42. OSHA Office of Training and Education - Revised by TEEX 12/04/07 42 Summary Assess the workplace for hazards Use engineering and work practice controls to eliminate or reduce hazards before using PPE Select appropriate PPE to protect employees from hazards that cannot be eliminated Inform employees why the PPE is necessary and when it must be worn Train employees how to use and care for their PPE and how to recognize deterioration and failure Require employees to wear selected PPE in the workplace Employers must implement a PPE program where they: