1. © Fluke NetworksVisiFault L&L June 2004 VisiFault Visual Fault Locator (VFL) New tool traces fiber, verifies continuity and polarity, helps find breaks

2. 2 VisiFault L&L June 2004 Key features  Bright visible light for fiber tracing, continuity and polarity verification, and fault location  Rugged design is built to last  Easy to use

3. 3 VisiFault L&L June 2004 Tracing, verification and fault location  Emits a bright beam of readily visible red light  Similar to a laser pointer  Basic tool for visually tracing fibers  Connect to one end of a fiber then locate the other end, even if it one of many fibers either in cable or terminated in a rack  Quickly check end-to-end continuity (no breaks)  Verify the proper polarity (orientation) within a multi-fiber connector like the MT-RJ  Quickly illuminate fiber faults  Breaks, damaged connectors on patch cords, defective splices in splice trays, tight fiber bends in and around equipment racks  Light may not be visible through thick or dark-colored cable sheaths, connector boots or dust caps

4. 4 VisiFault L&L June 2004 Tracing and troubleshooting

5. 5 VisiFault L&L June 2004 Rugged design is built to last  Withstands drops, impacts and rough treatment  Features a durable energy-absorbing holster, impact- resistant case and heavy-duty end cap  ensuring years of trouble-free operation in demanding field applications  Industrially engineered custom-case  mechanically tough  Unlike more fragile VFLs that utilize a flashlight body or plain plastic case  compact for field-use  ergonomically designed for comfort

6. 6 VisiFault L&L June 2004 Easy to use  2 output modes  steady for fault illumination  flashing for easier location  Status LED on front panel  Universal 2.5mm adapter  easy connection to SC, ST, FC and FJ connectors  Optional 1.25mm universal adapter  easy connection to LC and MU connectors  Over 80 hours battery life with two AA batteries  Attach the VisiFault to your belt using a lanyard or in the carrying case  always on hand when you need it

7. 7 VisiFault L&L June 2004 >80 hours CW battery life Two replaceable AA batteries

8. 8 VisiFault L&L June 2004 Specifications Optical Fiber compatibility multimode and singlemode Wavelength 650nm (visible wavelength) Laser safety rating class II Output power 1.0mW max. Output modes continuous (steady) and flashing (2-3Hz pulsed) Range3 km multimode 4 km singlemode Environmental and mechanical Operating temperature 0°C to 40°C Storage temperature -20°C to 60°C Relative humidity 95% (10 to 35°C) Vibration Random, 2g, 5-500 Hz Shock1m drop onto all corners and face Altitude 3000m

9. 9 VisiFault L&L June 2004 Specifications General Dimensions (H x W x D)157 x 52 x 33 mm (6.2 x 2.0 x 1.3 inch) Weight, with batteries0.18 kg (5.7 oz) Adapter 2.5mm universal Adapter cap tethered protective end cap Controls on/off, continuous/flashing Battery type 2 x AA Battery life > 80 hours in continuous mode Carry caseSoft with belt loop Safety CSA C22.2 No. 1010.1 1992, EN 61010-1, CE

10. 10 VisiFault L&L June 2004 Models and Accessories ModelsDescription VisiFaultVisiFault Visual Fault Locator with 2.5mm universal adapter includes multi-language instruction sheets and carrying case AccessoriesDescription NF380Universal adapter for connectors with 1.25mm ferrules

11. 11 VisiFault L&L June 2004 Safety information  Warning label: Class 2 laser  Do not stare into beam  Momentary exposure to the VFL’s output will not damage your eyes, however direct, long-term exposure is potentially hazardous  Cover the output with a dust cap when the VFL is not is use  View the output indirectly by shining the light onto a white card or sheet of paper

12. 12 VisiFault L&L June 2004 Overview  Bright red visible laser light source  Accelerates end-to-end fiber continuity checks  Speeds fiber tracing and identification  Simplifies fiber polarity verification  Aids in location of fiber faults including tight bends, breaks and bad connectors  Rugged case survives drops, impacts and vibrations  Features continuous and flashing modes  Connects to 2.5mm standard and 1.25mm SFF connectors  >80 hours CW operation on 2 AA batteries  Handy lanyard attachment and carrying case