1. Masterversion 13 INSTRUCTION for TSD-M… Torque Screwdrivers TSD-M 1,2NM Tool bits for slotted-head, Phillips, and test socket screws. TSD-M 6NM TSD-M 3NM 1 / Maria Schierscher/ M&I-TSD/May 2012

2. Masterversion 13 INSTRUCTIONS for TSD-M… Torque Screwdrivers Features Phoenix Contact‘s new constant torque screw driver enables a much faster and more reliable connection for their screw terminal block line. The TSD-M can be easily equipped with standard bits and the quick-exchange holder allows for fast bit exchange. The required torque is adjustable in small increments, according to EN ISO 6789. Non-slip 2 component handles provide for maximum grip. 2 / Maria Schierscher/ M&I-TSD/May 2012

3. Masterversion 13 INSTRUCTIONS for TSD-M Torque setting: Push down the adjustment ring while turning it simultaneously. Tool required for TSD-M 6NM. Each 180 rotation changes the torque and distinct feedback signals when the adjustment ring engages. Clockwise rotation increases the torque value and counterclockwise rotation decreases it. The tool can be found and stored in the base of the handle. TSD-M 6NM 3 / Maria Schierscher/ M&I-TSD/May 2012

4. Masterversion 13 INSTRUCTIONS for TSD-M Reading the torque: You can read the set torque from the scale to the right or left of the arrow tip. Example is set at 1.05. The torque level is set in order to prevent an over or under-torque that could potentially cause problems with the connections. 4 / Maria Schierscher/ M&I-TSD/May 2012

5. Masterversion 13 INSTRUCTIONS for TSD-M Inserting a bit: Push the bit into the quick-exchange holder until it snaps into place audibly. 5 / Maria Schierscher/ M&I-TSD/May 2012

6. Masterversion 13 INSTRUCTIONS for TSD-M Removing a bit: Push the sleeve forward and remove the bit. 6 / Maria Schierscher/ M&I-TSD/May 2012

7. Masterversion 13 INSTRUCTIONS for TSD-M Tightening screws: The free-running sleeve provides additional grip when using the screwdriver and helps you to stabilize the screwdriver. When the set torque has been reached, the screwdriver releases mechanically and provides both audible and distinct feedback to the operator. It is not possible to tighten the screw further. 7 / Maria Schierscher/ M&I-TSD/May 2012

8. Masterversion 13 INSTRUCTIONS for TSD-M Loosening screws: To enable you to loosen tight screws the torque for loosening screws is not limited, meaning it functions like a normal screwdriver. 8 / Maria Schierscher/ M&I-TSD/May 2012

9. Masterversion 13 INSTRUCTIONS for TSD-M Suitable bits: The quick-exchange holder accepts ¼” bits. 9 / Maria Schierscher/ M&I-TSD/May 2012

10. Masterversion 13 INSTRUCTIONS for TSD-M Torque Matrix TSD-M 1.2 NM p/n 1212224 0.3-1.2 NM5.2 mm 6.2 mm UT 2.5 UT 4 0.6-0.8 NM TSD-M 3 NM p/n 1212225 1.2-3.0 NM8.2 mm 10.2 mm 12.2 mm UT 6 UT 10 UT 16 1.5-1.8 NM 2.5-3.0 NM TSD-M 6 NM p/n 1212226 3.0-6.0 NM 16 mm UT 16 UT 35 2.5-3.0 NM 3.2-3.7 NM TSD Torque Range UT Terminal block Terminal block torque required *NOTE: if the torque screwdriver will not be used for a longer period, set the adjustment ring to the lowest torque value. This relieves the spring mechanism. *NOTE: Do not exceed maximum torque level as this may cause damage to the screwdriver or the material and the precision cannot be guaranteed. Width 10 / Maria Schierscher/ M&I-TSD/May 2012

11. Masterversion 13 INSTALLATION – TSD-M Tool bits Description thickness x width x height in mm thickness x width x height in inches Part number Slotted- head screws ASD BIT 0,5X3,0X50.01969 x.11811 x 1.968501212566 ASD BIT 0,6X3,5X50.02362 x.13780 x 1.968501212568 ASD BIT 0,6X3,5X70.02362 x.13780 x 2.755911212569 ASD BIT 0,8X4,0X50.03150 x.15748 x 1.968501212571 ASD BIT 1,0X5,5X50.03937 x.21654 x 1.968501212574 Graded, for test socket screws SF-BIT-SLS 0,9X6,5-50.03543 x.25591 x 1.968501212606 SF-BIT-SLD 0,6X3,5-50.02362 x.13780 x 1.968501212605 Phillips screws SF-BIT-PH 1-50Phillips #1 x 2 in1212579 SF-BIT-PH 2-50Phillips #2 x 2 in1212580 SF-BIT-PH 2-70Phillips #2 x 2.75 in1212583 11 / Maria Schierscher/ M&I-TSD/May 2012