Presentation is loading. Please wait.

Presentation is loading. Please wait.

SITE SAFETY || Safety Signs & Tags

Similar presentations


Presentation on theme: "SITE SAFETY || Safety Signs & Tags"— Presentation transcript:

1 SITE SAFETY || Safety Signs & Tags
Volume 2 Issue 28 Signs and tags are an important part of work area safety. They protect workers, visitors and the general public. If there is a potential hazard, signs must be visible at all times. OSHA has specific regulations pertaining to signs, symbols and tags. Employees should review this safety topic and then become familiar with the signs and tags that are needed for specific work areas in the workplace. OSHA Standard (a)(1) Accident Prevention Signs & Tags states specifications apply to the design, application, and use of signs or symbols (….) that indicate and, insofar as possible, define specific hazards that could harm workers or the public, or both, or to property damage. These specifications are intended to cover all safety signs except those designed for streets, highways, and railroads. These specifications do not apply to plant bulletin boards or to safety posters. Sign refers to a permanent or temporary notice or placard that provides a warning or safety instructions for industrial workers or members of the public who may be exposed to hazards. Tag is a kind of sign usually made of card, paper, pasteboard, plastic or other material used to identify a hazardous condition. Tags are usually used temporarily. (*1) Photo Credit – kasihasibaer; Gefahr. Creative Commons License: (*2) Photo Credit – Innes Hegedus-Garcia; Caution! Creative Commons License: Safety signs on a crane. (*1) Common wet floor sign. (*2) All safety signs should be visible and legible. If an active sign is vandalized, becomes rusted, or is coming off the affixed location, it must be replaced immediately. Any sign that is no longer relevant should be covered or removed immediately.

2 Examples of Danger signs & tags in use.
SITE SAFETY || Safety Signs & Tags Volume 2 Issue 28 OSHA Standard (c)(1) Danger signs. There shall be no variation in the type of design of signs posted to warn of specific dangers and radiation hazards. All employees shall be instructed that danger signs indicate immediate danger and that special precautions are necessary. Danger signs indicate that there is an immediate threat and special precautions are necessary. Red should be the main color on the top of a black and white Danger sign. Don’t assume everyone is aware of clear and present danger, signs are important! Use Danger signs to mark hazardous areas to prevent potential serious injuries to employees and others that could be in the area at any time. RED >> DANGER >> where immediate hazard exists YELLOW >> CAUTION >> to warn of potential hazards ORANGE >> WARNING >> notices, including biohazards (*3, *4) Photo Credit – Photo by MySafetySign.com (*5) Photo Credit – darkday; Confined Space with View. Creative Commons License: (*3) Examples of Danger signs & tags in use. (*4) (*5)

3 SITE SAFETY || Safety Signs & Tags
Volume 2 Issue 28 OSHA Standard (c)(2) Caution Signs. Caution signs shall be used only to warn against potential hazards or to caution against unsafe practices. All employees shall be instructed that caution signs indicate a possible hazard against which proper precaution should be taken. Caution signs warn against potential hazards or caution against unsafe practices, that if not avoided, could result in minor or moderate injury. Caution signs are yellow and black to ensure they are easily visible. Examples of Caution signs & tags in use. (*7) (*6) Photo Credit – Photo by MySafetySign.com (*7) Photo Credit – Sam.Weiss.; CAUTION! Creative Commons License: (8*) Photo Credit – Robert Scoble; Wind Tunnel warning signs. Creative Commons License: (*9) Photo Credit – ryaninc; Caution Tape Bathroom. Creative Commons License: (*6) (*8) (*9)

4 SITE SAFETY || Safety Signs & Tags
Volume 2 Issue 28 OSHA Standard (c)(3) Safety instruction signs. Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures. Other signs and tags that may be required include: Warning Signs Safety Instruction Signs Exit Signs Slow-Moving Vehicle Emblem Notice Signs Biological Hazard Signs Accident Prevention Tags OSHA Standard (b)(2) Each exit must be clearly visible and marked by a sign reading “Exit.” OSHA Standard (f)(7) Warning tags. Warning tags may be used to represent a hazard level between "Caution" and "Danger," instead of the required "Caution" tag, provided that they have a signal word of "Warning," an appropriate major message, and otherwise meet the criteria of this section. (*9) (*10) Photo Credit – David Shellabarger; Warning. Creative Commons License: (*11) Photo Credit – Leo Fung; Eye Wash Station. Creative Commons License: (*12) Photo Credit – Photo by MySafetySign.com (*10) (*11) (*12) Warning signs indicate a potentially hazardous situation. Safety Instruction signs are used to provide information, procedures or instructions. Notice signs are often blue and provide information that is considered important but not directly hazardous (example: security or hygiene).

5 SITE SAFETY || Safety Signs & Tags
Volume 2 Issue 28 More information about the use of safety tags: Accident prevention tags are used to prevent accidental injury or illness to employees who are exposed to hazardous conditions that may be unexpected or not readily apparent. Tags shall be used only until the identified hazard is eliminated or the hazardous operation is completed. Tags don’t need to be used where signs, barricades or other means of protection are being used. (*14) (*13) Photo Credit – SmartSign; Biohazard. Creative Commons License: (*14) Photo Credit – futureatlas.com; Biohazard danger symbol. Creative Commons License: (*15) Photo Credit – Zach Copley; BART Biohazard? (*13) (*15) Examples of biological hazard warning signs and tags in use. A biological hazard warning sign or tag shall be used to signify the actual or potential presence of a biohazard and to identify equipment, containers, rooms, materials, or experimental animals which contain, or are contaminated with, viable hazardous agents. (*10)

6 SITE SAFETY || Safety Signs & Tags
Volume 2 Issue 28 (*1) Photo Credit – kasihasibaer; Gefahr. (*2) Photo Credit – Innes Hegedus-Garcia; Caution! (*3, *4, *6, *12) Photo Credit – Photos by MySafetySign.com (*5) Photo Credit – darkday. Confined Space with View. (*7) Photo Credit – Sam.Weiss.; CAUTION! (*8) Photo Credit – Robert Scoble; Wind Tunnel warning signs. (*9) Photo Credit – ryaninc; Caution Tape Bathroom. (*10) Photo Credit – David Shellabarger; Warning. (*11) Photo Credit – Leo Fung; Eye Wash Station. (*13) Photo Credit – SmartSign; Biohazard. (*14) Photo Credit – futureatlas.com; Biohazard danger symbol. (*15) Photo Credit – Zach Copley; BART Biohazard? Creative Commons License:


Download ppt "SITE SAFETY || Safety Signs & Tags"

Similar presentations


Ads by Google