Presentation is loading. Please wait.

Presentation is loading. Please wait.

Signs. Most Frequently Cited (1999) 1926.201(g)(1) Traffic signs at point of hazard 1926.201(a)(4) Flag person-warning garments 1926.201(a)(1) Flag person/traffic.

Published byBlaze Milo Gregory Modified over 8 years ago

Similar presentations

Presentation on theme: "Signs. Most Frequently Cited (1999) 1926.201(g)(1) Traffic signs at point of hazard 1926.201(a)(4) Flag person-warning garments 1926.201(a)(1) Flag person/traffic."— Presentation transcript:

1 Signs

2 Most Frequently Cited (1999) 1926.201(g)(1) Traffic signs at point of hazard 1926.201(a)(4) Flag person-warning garments 1926.201(a)(1) Flag person/traffic control

3 Accident Prevention Signs Signs and symbols must be visible Promptly removed when hazard no longer exists Must meet design criteria

4 Danger and Caution Signs Danger Signs Immediate hazard exists Red for upper panel with black outline and white lower panel Caution Signs Warn of potential hazards or practices Yellow as color, black upper panel and borders with yellow lettering

5 Exit Signs Must have legible red letters (six inches high) White field Stroke of letters must be.75 inch wide

6 Safety Instruction Signs White with green upper panel with white lettering to convey principal message Additional lettering in black

7 Construction Signs All traffic control signs or devices used for the protection of workers must conform with Manual on Uniform Traffic Control Devices (MUTCD) for Streets and Highways (ANSI D6.1-1971) Electronic copies are available for download at http://www.osha.gov/doc/

8 Accident Prevention Signs Temporary means to warn employees of an existing hazard (defective tools, equipment) Not a substitute for signs Must meet requirements ofZ35.1-1968 and Z35.2-1968

9 Accident Prevention Signs BackgroundSafety ColorsCopy Specification WhiteRedDo not Operate WhiteBlack and RedDanger YellowBlackCaution WhiteBlackOut of Order

10 Signaling Flagmen are required when barriers can not provide suitable protection Signaling must conform to ANSI D6.1-1971 (Manual on Uniform Traffic Control Devices Signals- red flag/paddles (18” square) Flagman must wear red/orange vest

11 Barricades Barricades for the protection of employees must comply with the Manual on Uniform Traffic Control Devices (MUTD) for Streets and Highways.

12 1926.201 Signaling (a) Flaggers. Signaling by flaggers and the use of flaggers, including warning garments worn by flaggers shall conform to Part VI of the MUTCD.

13 1926.202 Barricades Barricades for protection of employees shall conform to Part VI of the MUTCD, which are incorporated for reference in 1926.200)g)(2).

14 1926.203 Revision of Paragraph c Signals are moving signs, provided by workers, such as flaggers, or by devices, such as flashing lights, to warn of possible or existing hazards.

Download ppt "Signs. Most Frequently Cited (1999) 1926.201(g)(1) Traffic signs at point of hazard 1926.201(a)(4) Flag person-warning garments 1926.201(a)(1) Flag person/traffic."

Similar presentations

Part 7 Traffic Controls For School Areas. Section 7A.01 STANDARD statement changed to GUIDANCE statement TCDs in school areas should be related to: Volume,

Part 7 Traffic Controls For School Areas. Section 7A.01 STANDARD statement changed to GUIDANCE statement TCDs in school areas should be related to: Volume,
SUBPART G, O, and W Signs, Mechanized Equipment and Rollover Georgia Institute of Technology Presented By: Thomas Dean (404) 894-8083.

SUBPART G, O, and W Signs, Mechanized Equipment and Rollover Georgia Institute of Technology Presented By: Thomas Dean (404)
Road Safety & Awareness Training Your “Right to Know” 29 CFR 1926 / DOT MUTCD This material was produced under grant number SH22297-SH1 from OSHA. It does.

Road Safety & Awareness Training Your “Right to Know” 29 CFR 1926 / DOT MUTCD This material was produced under grant number SH22297-SH1 from OSHA. It does.
Heavy Equipment  Addressed under 1926 Subpart O: Heavy Equipment  All equipment left unattended at night, adjacent to a highway in normal use, or adjacent.

Heavy Equipment  Addressed under 1926 Subpart O: Heavy Equipment  All equipment left unattended at night, adjacent to a highway in normal use, or adjacent.
Rules of the Road. Introduction This training will assist Spanish- speaking Motor Carriers in understanding some of the important traffic regulations.

Rules of the Road. Introduction This training will assist Spanish- speaking Motor Carriers in understanding some of the important traffic regulations.
Overview of 2009 MUTCD. Tom McDonald, PE Safety Circuit Rider Iowa LTAP.

Overview of 2009 MUTCD. Tom McDonald, PE Safety Circuit Rider Iowa LTAP.
Driver Safety.

Driver Safety.
Rules for Flaggers WAC 296-155-305.

Rules for Flaggers WAC
Safety signs fall into five categories 1.Prohibitive 2.Warning 3.Mandatory 4.Emergency or First Aid 5.Fire Fighting signs.

Safety signs fall into five categories 1.Prohibitive 2.Warning 3.Mandatory 4.Emergency or First Aid 5.Fire Fighting signs.
Signs, Signals, and Markings. Shapes of Signs Octagon – Always means stop. Downward Pointing Triangle – Yield Sign ONLY Pennant – No Passing Warning Signs.

Signs, Signals, and Markings. Shapes of Signs Octagon – Always means stop. Downward Pointing Triangle – Yield Sign ONLY Pennant – No Passing Warning Signs.
Describe difference between a shared left-turn lane and a left turn lane. Describe what actions to take with pedestrian signals and traffic control officers'’

Describe difference between a shared left-turn lane and a left turn lane. Describe what actions to take with pedestrian signals and traffic control officers'’
Motor Vehicles, Mechanized Equipment for Construction.

Motor Vehicles, Mechanized Equipment for Construction.
Traffic Engineering Traffic Control Devices. Traffic Control Traffic engineers do not have any control over individual drivers need to develop devices.

Traffic Engineering Traffic Control Devices. Traffic Control Traffic engineers do not have any control over individual drivers need to develop devices.
Qualified Electrical Worker

Qualified Electrical Worker
Safety Sign and Label Design SWEDE 2011 – Bastrop, Texas presented by Dan Cowan, Oncor.

Safety Sign and Label Design SWEDE 2011 – Bastrop, Texas presented by Dan Cowan, Oncor.
Signs, Signals, Markings & Speed Limits Driver Risk Prevention Curriculum State of New Hampshire Departments of Education and Safety Division of Program.

Signs, Signals, Markings & Speed Limits Driver Risk Prevention Curriculum State of New Hampshire Departments of Education and Safety Division of Program.
Driver Safety Fall 2014 Miss Padelsky. Traffic Signs, Signals & Road Markings  Traffic signs, signals & road markings are set up to control the flow.

Driver Safety Fall 2014 Miss Padelsky. Traffic Signs, Signals & Road Markings  Traffic signs, signals & road markings are set up to control the flow.
Driver Theory Traffic Signs Work Zone Signs. Work Zone Work Zone Signs are usually diamond shaped, like warning signs, but they are orange instead of.

Driver Theory Traffic Signs Work Zone Signs. Work Zone Work Zone Signs are usually diamond shaped, like warning signs, but they are orange instead of.
Safety Unit.  Approximately 26,000 welders are injured at the job site each year.  Welders each day are exposed to: ◦ Uv rays from welding arc- eyes.

Safety Unit.  Approximately 26,000 welders are injured at the job site each year.  Welders each day are exposed to: ◦ Uv rays from welding arc- eyes.
Occupational Health and Safety Issues

Occupational Health and Safety Issues

Similar presentations

Ads by Google