1. Pneumatic tools
IR Range Overview
Welcome remarks TBD.
01/12/06

2. Construction pneumatic tools
Paving breakers
Vertically down demolition
Pick hammers
Horizontal and downward demolition
Chipping hammers
All position demolition + Surface work
Jackhammers
Hole drilling in rock and concrete

3. Paving breakers Vertically down demolition works
All paving breakers are available with or without “Vibration dampening”.
IR15
15 kg
Light road demolition, bridge decks
IR20
21 kg
Germany (end 2006)
IR25
25 kg
Concrete and asphalt demolition
IR30
30 kg
IR40
40 kg
Concrete demolition: Thick slabs
Light Construction Utility Equipment

4. Paving breakers
High output, low air consumption Heavy weight pistons provide the highest output in their category. Tight tolerance between piston and cylinder results into the best usage of compressed air. Direct impact on chisel means less moving parts. Distribution ring instead of plate distribution is more reliable and reduces air consumption.
Vibration levels The vibration-damped (BV type) breakers from Ingersoll Rand offer some of the lowest vibration levels (at maximum output) in their categories, allowing for a longer daily usage to make your work more efficient The vibration values are measured on 3 axes according to the standard EN :2005.
Light Construction Utility Equipment

5. Paving breakers
Built-in oiler Apart from the IR15, the breakers have a built-in oiling device allowing for continuous convenient greasing of your tool.
Robustness and simple maintenance Thanks to a good design and a small number of moving parts, Ingersoll Rand breakers are reliable and easy to service at a lower cost, even with limited workshop equipment.
Rotating muffler The robust rubber muffler can easily be rotated without tools. This feature allows the user to choose the direction of exhaust most appropriate for the job. Moreover, thanks to the slim design of the muffler, the view to the chisel is not blocked and the hammer easily fits into the toolbox of your Ingersoll Rand portable compressor.
Noise levels The efficient rubber muffler allows Ingersoll Rand breakers to comply with the EN2000/14/ED directive on permissible noise levels.
Corrosion resistance Thanks to zinc-plating and phosphating, the metal surfaces of Ingersoll Rand pneumatic breakers are extremely resistant to corrosion.
Light Construction Utility Equipment

6. Pick hammers Horizontal and downward demolition works
All pick hammers are available with either latch or screw retainer
IR9PS
9 kg
Standard
IR10PV
10 kg
Vibration dampened
IR12PS
12 kg
IR12PV
Light Construction Utility Equipment

7. Chipping hammers Light demolition works in all positions
Surface cleaning
All chipping hammers are also available as a kit with chisels.
IR2PS
2.6 kg
IR3PS
3.5 kg
IR5PS
5 kg
Light Construction Utility Equipment

8. Jackhammers Hole drilling in rock/concrete
IR17 and IR23 exist with and without vibration dampening
IR5JS
5 kg
Horizontal drilling
IR17
17 kg
Heavy duty, low air cons.
IR23
23 kg
Heavy duty, high torque
Light Construction Utility Equipment