Presentation is loading. Please wait.

Presentation is loading. Please wait.

Chapter 5 Circuit Simulation.

Published byОскар Ковач Modified over 5 years ago

Similar presentations

Presentation on theme: "Chapter 5 Circuit Simulation."— Presentation transcript:

1 Chapter 5 Circuit Simulation

2 RC Circuit Response

3 SPICE Common Sense

4 Transistor DC Analysis

5 Inverter Transient Response

6 Fanout-of-4 Inverters

7 Optimization for The Best P/N Ratio

8 SPICE MOS Model

9 All the simulations must pass TT,FF,SS,SF,FS design corners.
Corner Issues All the simulations must pass TT,FF,SS,SF,FS design corners.

10 OPconditions

11 MOS I-V Characteristics

12 Extraction of Threshold Voltage

13 MOS threshold Under Different Design Corner and Temperature

14 Comparisons of Process

15 Monte Carlo Simulation

Download ppt "Chapter 5 Circuit Simulation."

Similar presentations

Tunable Sensors for Process-Aware Voltage Scaling

Tunable Sensors for Process-Aware Voltage Scaling
1 Analysis and Simulation Exercises ~DC Circuit Analysis (1) Basic Circuit Laws (Kirchhoff ’ s Voltage/ Current Law) Thévenin’s Theorem Norton ’ s Theorem.

1 Analysis and Simulation Exercises ~DC Circuit Analysis (1) Basic Circuit Laws (Kirchhoff ’ s Voltage/ Current Law) Thévenin’s Theorem Norton ’ s Theorem.
S. Reda EN160 SP’08 Design and Implementation of VLSI Systems (EN1600) lecture10 Prof. Sherief Reda Division of Engineering, Brown University Spring 2008.

S. Reda EN160 SP’08 Design and Implementation of VLSI Systems (EN1600) lecture10 Prof. Sherief Reda Division of Engineering, Brown University Spring 2008.
Logical Effort A Method to Optimize Circuit Topology Swarthmore College E77 VLSI Design Adem Kader David Luong Mark Piper December 6, 2005.

Logical Effort A Method to Optimize Circuit Topology Swarthmore College E77 VLSI Design Adem Kader David Luong Mark Piper December 6, 2005.
IEEE Spice Seminar Simulation Program with Integrated Circuit Emphasis.

IEEE Spice Seminar Simulation Program with Integrated Circuit Emphasis.
Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.

Chapter 13 : Bipolar Junction Transistors 13-0 Introduction 13-1 Current and voltage relationships 13-2 Common –emitter characteristics 13-3 Load –line.
Modeling conduction loss SEPIC example MOSFET R on, diode V D Averaged terminal voltages of switch network, including conduction losses:

Modeling conduction loss SEPIC example MOSFET R on, diode V D Averaged terminal voltages of switch network, including conduction losses:
Z. Feng MTU EE4800 CMOS Digital IC Design & Analysis Fall 2010 7.1 EE4800 CMOS Digital IC Design & Analysis Lecture 7 Midterm Review Zhuo Feng.

Z. Feng MTU EE4800 CMOS Digital IC Design & Analysis Fall EE4800 CMOS Digital IC Design & Analysis Lecture 7 Midterm Review Zhuo Feng.
Digital Integrated Circuits A Design Perspective

Digital Integrated Circuits A Design Perspective
Introduction to PSpice R. E. Abdel-Aal February 2005.

Introduction to PSpice R. E. Abdel-Aal February 2005.
Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response

Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response
Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response Credits: David Harris Harvey Mudd College (Material taken/adapted from Harris’ lecture.

Introduction to CMOS VLSI Design Lecture 4: DC & Transient Response Credits: David Harris Harvey Mudd College (Material taken/adapted from Harris’ lecture.
© Digital Integrated Circuits 2nd Inverter CMOS Inverter: Digital Workhorse  Best Figures of Merit in CMOS Family  Noise Immunity  Performance  Power/Buffer.

© Digital Integrated Circuits 2nd Inverter CMOS Inverter: Digital Workhorse  Best Figures of Merit in CMOS Family  Noise Immunity  Performance  Power/Buffer.
Design and Implementation of VLSI Systems (EN0160) Prof. Sherief Reda Division of Engineering, Brown University Spring 2007 [sources: Weste/Addison Wesley.

Design and Implementation of VLSI Systems (EN0160) Prof. Sherief Reda Division of Engineering, Brown University Spring 2007 [sources: Weste/Addison Wesley.
S. Reda VLSI Design Design and Implementation of VLSI Systems (EN1600) lecture09 Prof. Sherief Reda Division of Engineering, Brown University Spring 2008.

S. Reda VLSI Design Design and Implementation of VLSI Systems (EN1600) lecture09 Prof. Sherief Reda Division of Engineering, Brown University Spring 2008.
Module 3: Part 1 The Field-Effect Transistor (FET)

Module 3: Part 1 The Field-Effect Transistor (FET)
Introduction to CMOS VLSI Design Nonideal Transistors.

Introduction to CMOS VLSI Design Nonideal Transistors.
EE 447 VLSI Design 4: DC and Transient Response1 VLSI Design DC & Transient Response.

EE 447 VLSI Design 4: DC and Transient Response1 VLSI Design DC & Transient Response.
Trace-Based Framework for Concurrent Development of Process and FPGA Architecture Considering Process Variation and Reliability 1 Lerong Cheng, 1 Yan Lin,

Trace-Based Framework for Concurrent Development of Process and FPGA Architecture Considering Process Variation and Reliability 1 Lerong Cheng, 1 Yan Lin,
Design Considerations in CLBs for Deep Sub-Micron Technologies Louis Alarcón Octavian Florescu.

Design Considerations in CLBs for Deep Sub-Micron Technologies Louis Alarcón Octavian Florescu.

Similar presentations

Ads by Google