Presentation is loading. Please wait.

Presentation is loading. Please wait.

Coffee Dispenser Introduction to Basic Features.

Similar presentations


Presentation on theme: "Coffee Dispenser Introduction to Basic Features."— Presentation transcript:

1 Coffee Dispenser Introduction to Basic Features

2 The VCafe is fitted with a dispense control panel permitting two timed drink selections for each product and an un-timed selection for hot water. Two selections provide the operator the flexibility to set two different cup sizes, one timed cup and one carafe, two carafe sizes or un-timed dispense. The dispense controls can be programmed for press and release time-out or press and hold time-out using a familiar interface. Initially, all versions will be of the PC-2 style, that is, two timed selections for each product with a stop button to interrupt a timed dispense.

3 No cleaning of a dosing system is required!
Unique and available only on the Vcafé is a proprietary 2 liter, flexible, sealed product package and integral pump. Much like the Express Juice packaging, by incorporating the pumping system into the packaging, the operator replaces the entire product handling system each time the previous container is emptied. No cleaning of a dosing system is required!

4 When empty, the package is removed from the storage compartment and replaced by the new package.
This is accomplished by removing the pump dust cover and dropping the pump into the receiver on the floor of the concentrate compartment. The cap settles into a nest on the floor of the compartment and a metal ring imbedded in the cap enables a magnet to hold the pump fitment securely in place.

5 The Service Interface The LED display provides fault indications for service and troubleshooting plus direct control of the following features without using additional accessories: Cleaning? NO Place large container before starting! Cleaning Mode – Aids in De-liming Solenoids Regular ratio 25:1 Decaff ratio 19:1 Accurate Mix Ratio Set By Program Disp Temp =190°F Correction =5°F Tank Temp =195°F Lockout =175°F Dispense Temperature Control and Display Mode Coffee Run reg. No Run dec. No Place container! Calibration Mode Performed Twice Yearly Product Volume Dispensed For Usage Verification Testing? NN Place large container before starting! Testing - Performed At Each Service Large Reg: 0.0gl Small Reg: 0.0gl Large Dec: 0.0gl Small Dec: 0.0gl Enter service Code * * * * PIN Protected Security for All Machine Settings Heater Type: 5000W Heater Wattage

6 Individual Concentrate Compartments Independent Refrigeration Systems
Thermoelectric refrigeration (Peltier) is used to maintain the temperature, one Peltier device is fitted to each compartment. Individual controls are calibrated to maintain 39°F (4C°) temperature.


Download ppt "Coffee Dispenser Introduction to Basic Features."

Similar presentations


Ads by Google