1. ZXP3 Printer Driver Installation and settings for EPIC Cards
A-ID Systems Tech document - ZXP3 Printer Drivers settings for EPIC Project
ZXP3 Printer Driver Installation and settings for EPIC Cards

2. ZXP3 Printer Drivers Installation
Please select the driver’s version DZ31CG for printing the EPIC and AADHAAR Cards. Once you double click on the driver’s exe the below box will appear.

3. Please select the Next button the below Dialog box will come
In this dialog box please select the USB Driver option. After that the below dialog box will come select OK Button

4. The below dialog box will appear select YES Button

5. After Select the YES button the below dialog box will come
After Select the YES button the below dialog box will come. Select the NEXT button

6. After select the Next button the below Dialog box will come
After select the Next button the below Dialog box will come. Here also select the NEXT button

7. After select the Next button the below Dialog box will come, Then wait till the process completes.

8. After complete the process the below dialog box will come here we need to select Install button
After click the Install button, The below process will come. We need to wait till complete the process.

9. After complete the process the below dialog box will come
After complete the process the below dialog box will come. In the dialog box will show the drivers installed path. Here click the Next button for the next process.

10. After click the Next button the below dialog box will come here we need to click the Finish Button means the Installation process is completed.

11. Drivers Setting for EPIC Project
After completion of the installation Switch on the printer and connect the USB cable to PC.
New hardware will found and install the drivers automatically.
If the drivers are not installed then we need to give the path to install the drivers properly.
The path is C:\Program Files\Zebra Technologies Corporation\Zebra ZXP S3 and S1 card Printers
After complete the drivers installation go to the below path and do the settings
Go to control Panel/Printers & Fax’s/Select the ZXP3 USB Card printer/right click on ZXP3 printer driver and select Printer properties
If the printer is not having the firmware We need to update the same.

12. After update the firmware Need to Execute the below command for the first time installation
Go to control Panel/Printers & Fax’s/Select the ZXP3 USB Card printer/right click on ZXP3 printer driver and select Printer properties/Select the device settings tab/Tools.
+PRF for stop the preload card.
+RIBSAV 1 – for stop the precallibration.
SDATA – to save the command in Main Board
Fhalf – This command is for EPIC card photo starting point.
SDATA - to save the command in Main Board

13. Select the preferences in as shown in the below image

14. Below pop up message will show in the PC screen and select OK to continue the settings (The Pop up message will show which ribbon is loaded in the printer)

15. Once you click the OK button the below dialog box will come
Once you click the OK button the below dialog box will come. Make sure below settings has been applied.

16. After all the setting we need to select Front K Panel Options… the below dialog box will come and we need to select the below mentioned options then click ok button.

17. After click the OK button the Dialog box will close then old dialog box will come. There we need to select Image Control Option. Then the below dialog will appear. Need to select the black panel option up to 40 – 60.
This value is useful to print the backside issuing authority signature.

18. After done the Black pane setting close the dialog box
Next Select the Advanced tab and select Printing Default button

19. After Selecting the Printing Defaults button the same Printing preference dialog box will appear. We need select the same setting.
After that open the EPIC PDF file then give the print command. The below dialog box will come. In case if we are having any doubts about the setting, from here also we will check once again whether we given the proper settings or not.

21. How to insert the EPIC card in the Printer