1. With Bluetooth Connectivity
RM Classboard Touch
With Bluetooth Connectivity

2. Bluetooth RM Classboard Touch
Works with the following computer configurations:
Mac
PC with Built in Bluetooth
PC with no built in Bluetooth
Main benefits of the Bluetooth RM Classboard Touch:
No cable required to connect the board to the computer.

3. Caring for your RM Classboard Touch
DO NOT UNDER ANY CIRCUMSTANCES USE DRY ERASE CLEANER ON THE BOARD’S SURFACE.
The board is cleaned by using soap and water mixture.
If you write on the board use only dry erase markers and clean the board that day to insure you board will last.
The board has a five year warranty from RM.

4. Powering the RM Classboard Touch

5. Installing the RM Classboard Bluetooth

6. Installing the RM Classboard Bluetooth
Bluetooth is held in place by two screws.
The RM installers should have connected this during installation.

7. Loading the RM Classboard Software
You must have administrative rights to load the software.
Use the Polyvision disk that comes in the Polyvision box or
Use the Polyvision software from the Web Site
Choose Mac or PC

8. Downloading the RM Classboard Drivers

9. Downloading the RM Classboard Drivers
Once drivers have been loaded, turn off the computer completely.
Leave computer shut down for two minutes.
Insert the Polyvision Bluetooth into one of your computer’s USB ports.
Turn on computer with Bluetooth inserted in the USB port.

10. If you have a PC, please continue to the next slide for directions on whiteboard connectivity. If you have a MAC please continue to the NEXT Stop Sign in this presentation for connecting using your MAC computer.
Stop and Read Below:

11. Required Bluetooth Setting on Laptops
On the “Start” toolbar bar, chose the Control Panel.
Once in Control Panel, chose Administrative Tools.

12. Required Bluetooth Setting on Laptops
Choose Services Shortcut.

13. Required Bluetooth Setting on Laptops
Select Bluetooth Support Services.

14. Required Bluetooth Setting on Laptops
On the General tab, hit the stop button.

15. Required Bluetooth Setting on Laptops
Move to the Log On Tab, make sure to chose LOCAL SYSTEM ACCOUNT.
Go back to the General Tab and hit the START button.

16. Connecting to the POLYVISION Adapter to the Classboard Bluetooth- PC Directions
Now that you the Classboard drivers dowloaded, you are ready to connect the board with your computer. Give your computer a chance to recognize the Polyvision bluetooth. You will see this icon pop up in the system tray. Step 1:
Right click on the Bluetooth icon in the system tray on your desktop.
Step 2:
A similar menu will pop up, please select Add Bluetooth Device.

17. Connecting to the POLYVISION Adapter- PC Directions
Step 3: This screen will appear, follow directions below:
Select the device is ready to be setup and hit the NEXT button.

18. Connecting to the POLYVISION Adapter- PC Directions
Step 4: Choose the PV device and follow directions below:
Select and hit the next button

19. Connecting to the POLYVISION Adapter- PC Directions
Step 5: Select the Use Passkey found in documentation and type in the passcode 1,2,3,4 and hit next.
Passcode is 1, 2, 3,4
Hit next after entering code.

20. Connecting to the POLYVISION Adapter- PC Directions
Step 6: The computer will connect to the RM Classboard Bluetooth.

21. Connecting to the POLYVISION Adapter- PC Directions
Final Step: Your Bluetooth is now configured and ready to be used.
Click on the finish button.

22. Configuring the POLYVISION Driver- PC Directions
Step 1: Click on the Polyvision board short cut and choose the “Configure Polyvision Driver tab.”

23. RM Classboard Configuration Preferences- PC Directions
Short-cut to the board driver
can be found on the desktop to access the configuration. Click to launch configuration options.
Choose the “best” selection on the
“projection” tab. This will give you the
best calibration.

24. Connecting to the POLYVISION Adapter to the Classboard Bluetooth- PC Directions
Final step is to connect the whiteboard by clicking the “find serial whiteboard button.”
Once the board is connected you will hear the board “chirp.”
Now hit the projector button on the board short cuts and this will take you to the calibration screen.

25. Connecting the POLYVISION Adapter to the Classboard Bluetooth- PC Directions
After you go through the previous steps one time, you should automatically connect to the board as long as your Polyvision Bluetooth Adapter is inserted in your computer…every time you turn on the board, it will automatically connect with the “chirp.” Then you hit the projection button and the board is ready to use.

26. Calibrating the RM Classboard Touch
Hit the projection short cut button on the board this
green calibration screen will pop up. Hit each target to
ensure perfect calibration.

27. Main Short Cut Tools on the RM Classboard

28. More Tools Continued…