1. New Product Training
2015 Mono MFPs & Printers

2. Course Objectives Discuss Menu Layout/Service Menu
Provide hands On With The Products
Answer Your Questions

3. The New Oki Mono Products
B412dn / B432dn / B512dn / ES5112
&
MB472w / MB492 / MB562w / ES5162

4. All Based On This Engine

5. General Information Wireless Operation
Wired / Wireless is an “either / or” situation
Apple AirPort / Oki Mobile for Android
Not mutually exclusive
Wireless Option – Printers
End User Installable
MSRP - $70 approximately
Wireless – MFP
Factory Installed Only
MB472w & MB562w
No Wireless in MB492
ONES:
Optional for printers (WEP)
Not Available for MFP’s

6. Function (End user) F/W Checked View Information *System Information
*Network (Information)
Function (End user)
Press “Setting” key
Press key till finding out “View Information”
Press OK key
Press “Device Setting” icon
Press “View Information” icon on the panel
View Information
Network Information
System Information
Serial No.
Asset No.
Lot No.
Firmware Version
CU Version
PU Version
Panel Version
Total Memory
Flash Memory
Network Information
（Wired LAN)　
Network Connection
IPv4 Address
Subnet Mask
Gateway Address
MAC Address
NIC Program Version
IPv6 Address (Local)
IPv6 Address (Global)
Wireless Information
（It will be shown when enabling the Wireless LAN) 　
Firmware Version
Serial No.
SSID
Security
State
Band
Channel
RSSI

7. Function (End user) Device Information F/W Checked Press “STAUTS” key
Select “Device Information” on the panel
Device Information
Job Lists
Fax Job View/Cancel
Supplies Status
Drum Unit
Toner(n.nK)
Counter
Print Count
Tray 1
Tray 2
MP Tray
Scan Count
Total Scanned Pages
Scanned Pages
Total Scanned Pages (ADF)
Scanned Pages (ADF)
Wireless Information
* Only show this category when enabling the wireless LAN.
Firmware Version
Serial No.
SSID
Security
State
Band
Channel
RSSI
* When enabling Wireless LAN

8. Function (End user) Various Report Print F/W Checked [7in Touch Panel]
[Graphics Panel]
[7in Touch Panel]
Press “Device Setting” icon on
the panel.
The other operation is as same as
graphics panel.
Fax TX / RX Log
Journal Report

9. Function (End user) Adimn Setup > Management > Power Save
F/W Checked
Function (End user)
Adimn Setup > Management > Power Save
The default setting is ON
Management
Power Save
Power Save Time
Sleep Time
Auto Power Off Time
Silent Mode
ECO Mode
Silent Mode
When waking up from “Sleep Mode” without the printing process, the printer will not perform the initialization.
ECO Mode

10. User Functions
Scan To /Scan to Shared Folder Virtually the Same As MB4x1. Okidocs 4074 And 4059 Have Been Updated.
Job Macro Feature Actually Useful!!
No Remote PC Setting Needed When Push/Pull Scanning.

11. Service for field engineer
F/W Checked
Service for field engineer
System Maintenance
Press the following procedure.
Setting > 　　　　　> 0 > 1 > 0 > 3 >
Input Password
The default password is “000000”.
Common

12. Service for field engineer
F/W Checked
TH_R1 : Section3.2 (p92)
TH_R1 : Section3.1 (p.94)
Service for field engineer
System Maintenance (1)
Do not use Format
Do not use

13. Service for field engineer
F/W Checked
Service for field engineer
Super G3
Setting (Key) > Admin Setup > User Install > Super G3 (ON/OFF)
If customer may have a problem for transmitting / receiving fax message.
Super G3 = OFF (especially through Optical Network)
Reduce H/Modem Rate (Admin Setup > Fax Setup > Fax setting )

14. Service for field engineer
F/W Checked
Service for field engineer
TH_R1 : Section2.5.3 (p53)
TH_R1 : Section2.5.3 (p.55)
Fax Error Code

15. F/W Checked
Forced ON Line Mode
MB472
Turn on the switch while pressing “1” and right key.
MB492/MB562
Turn on the switch while pressing “1” and “6” key.

16. Resetting the NIC To Factory Defaults
This Function will Return All Network Settings.
Hold Down 8 Key and STOP Key Upon Startup(MB492,MB562,ES5162)
For MB472 Hold The Down Arrow And Stop Key

17. Improve the paper setting method of the MPT
Current B4x1/MB4x1 are required 2 Action (paper set, lift-up button is pressed),
there was dissatisfaction point that button operation does not understand.
-PN/FN307 Improvement to one action of the paper set.
(Button press is not required by the automatic paper detection sensor)
B4x1/MB4x1
B4x2/MB4x2
Hopping roller
Hopping roller
Automatic hoisting
Up and down manually
Button-MPT
Hopper-MPT
（ Lifting manually ）
Hopper-MPT
Paper　end　Lever
Pick uｐ roller
（Automatic hoisting　）
Paper setting method
　①Moving down Hpper-MPT
　②Setting media to Hopper-MPT
　③Pressing Button-MPT⇒Hopper-MPT to be lifted
paper setting method
　①Setting media to Hopper-MPT
Other
　Paper end detection is added

18. Option compatibility
New 2nd tray has backward compatibility. Current 2nd tray will be EOL after 307 release
256M RAM work with B4x1 only
Wireless module works with B5x2/B4x2 only (incl. ES variant)
option
2nd tray
(current)
(new)
256MB RAM
wireless module
P/N
TBD
new model DT
MFP
ES5162dnw
MB562dnw
ES4192dn
MB492dn
MB472dnw X
SFP
ES5112dn
B512dn
ES4132dn
B432dn
B412dn
current model
ES4191
ES4161
MB491dn
MB471dnw
MB461dn
ES4131dn
ES4131dn+
B431DN
B431DN+
B411DN
EDT
MB451dn
B401D

19. Toner for current model
Consumable compatibility
Toner for current model (B4x1) is not compatible with new model (B4x2)
Drum is common part current model (B4x1) and new model (B4x2)
ES model has dedicated toner and drum
Toner / drum is common for SFP (B4x2) and MFP (MB4x2)
consumable
Toner for current model
Toner for new model
image drum
B4x1(EDT)
B4x1(DT)
ES41x1
B4x2
ES41x2
B4x1
(EDT)
B4x1(DT) B4x2
ES41x1 ES41x2
1.5K
2.5K 3K 7K
12K
11.1K(5%)
new model ES
MFP
ES5162dnw
ES4192dn X
SFP
ES5112dn
ES4132dn B MB
MB562dnw
MB492dn
B512dn
B432dn
MB472dnw
B412dn
current model
ES4191
ES4161
ES4131dn
ES4131dn+
MB491dn
B431DN
B431DN+
MB471dnw
MB461dn
B411DN
B/MB (EDT)
MB451dn
B401D

20. Questions