1. Huntington Specialty Materials
Specializing in
Proprietary Polysilazane
Covalent Bonding Protective Coatings
For Industrial and Commercial use

2. Huntington Specialty Materials
Huntington Specialty Materials through a Limited Joint Venture has obtained the exclusive Distribution rights to a Unique and Proprietary group of ever growing Polysilazane coating products and resin formulations .
This relationship brings with it, over 30 years
of Research & Development work as well as the manufacturing experience with the Polysilazane Chemistry.

3. Huntington Specialty Materials
Polysilazane based Nano-Ceramics
Clear and Solid tone Coating Products that ;
are Chemical and Corrosion Resistant
are High Temperature Resistant
are Adhesion Promoters
are Abrasion Resistant
are RoHS compliant & VOC Exempt
are Protective Sealer and Water Proofers
are Ambient curable (or oven accelerated )
are “No Free silicones” Mold Sealers
are “No Free silicones” Mold Release Agents

4. Huntington Specialty Materials
Polysilazane Thermal Dissipation Coatings:
(HS-900, 901, 902, & 906 products)
Offering a variety of film thickness
protection to fit specific applications
Increased thermal dissipation from
electronic components and circuits,
adding protection against Water and
Moisture, Corrosion and Oxidation of
critical components
Increase Reliability and Performance

5. Huntington Specialty Materials
HS-907 – has the ability to
Increase performance
and Reduce maintenance
A Thin Film Polysilazane Clear Coating –
That Covalently bonds to all Ferrous and Non-Ferrous Metal Alloys, Acrylic & Lexan® Windscreens surfaces, including other types of cured Aircraft and Industrial paints.
Greatly Reduces drag coefficient of moving surfaces.

6. Huntington Specialty Materials
HS-908 – A Clear Polysilazane
Thin-Film Clear Coating
Ideal for; Glass, Solar Panels, etc.
fills the micro-pores within the
glass allowing for easy cleaning
and helps to reduce dust and dirt
build-up bonding of bird droppings
And water/mineral spotting.
Lowers required maintenance - Improves long term performance

7. Huntington Specialty Materials
HS-909
Super-Slick Polysilazane
Optically Clear Coatings;
Easily hand applied as surface
Maintenance Products
Super-Slick Nano-Ceramic Clear Coat
Reduces Drag Coefficient
Increases control surface response,
performance & potential fuel savings Keeping it “Super-Slick”
Helps to Increase Performance, Increase Lift and Reduce Drag

8. Huntington Specialty Materials
HS-910 – Polysilazane Clear Coat
Provides a higher film build
for more Severe Service applications.
Offering a Tough Super-Slick Surface
that will the “Reduce Drag Coefficient”
and Increase Lift, increase control
surface response & potential fuel savings
Increase performance and Lower Maintenance

9. Huntington Specialty Materials
HS-910C is a:
Polysilazane Nano-Ceramic Clear Coat that delivers a Super-Slick , durable surface with an extremely low coefficient of friction .
That can benefit with “Less-Drag” & “Less Debris Build-up”
Offers great resistance to oxidation of painted or Gel-Coated® surfaces
HS-910 is UV stable and covalently bonds to the substrate
HS-910C long Term Durability Enhances Performance, Reduces Maintenance

10. Huntington Specialty Materials
HS-920 Mold sealer;
If holding a vacuum is a problem,
HS-920 is the solution………
Seals from the Face Side without dimensional change.
Flows into micro pores and/or cracks, sealing them with a covalently bonded Nano-Ceramic clear material.
HS-920 expands and contract with the mold tool.
Works seamlessly with the HS-940 Release.
HS-920 has no “free silicones” 100% no transfer to the part face.
Works with all mold materials, Graphite, Composite, Metal alloys, etc.

11. Huntington Specialty Materials
HS-922 Polysilazane Water Proofer –
Covalently bonds to the fibers of cloth,
canvas and fine Screens*, forming a
Hydrophobic barrier that repels water
and is odorless when cured even when
hot, non-sticky & easier to clean surfaces
Unaffected by fuels, oils or solvents.
*restricts the passage of water while allowing
fuels to pass through freely.

12. Huntington Specialty Materials
HS-938 a Nano-Ceramic Clear Protective Sealer
HS-938 is a high performance, ambient air cured product that is easily applied by a simple wipe-on application. The product creates a covalent & permanent bond to most any substrate. HS-938 is able to fill and seal the micro-pores and cracks of any substrate with an extremely tough high temperature resistant material that becomes a slick-thin dry film lubricating coating that works in conjunction with or without the use of oils making it ideal for; combustion, turbine and jet type engine components. It helps to prevent oxidation of substrate materials and it is also very corrosion resistant, has hydrophobic properties and offers great UV protection to most any substrate it is applied to, helping to lengthen usable life spans. HS-938 Clear Sealer can be applied as a stand-alone or a clear top-coat material to protect & improve performance of all types of cured paints, coatings, plastics & ferrous and non-ferrous metals and composite parts & structures.
HS-938 may be re-applied, if the need ever arises.

13. Huntington Specialty Materials
HS-940 Nano-Ceramic Mold release
Dimensional change is not measurably affected with a application thickness of 2 to 3 microns .
HS-940 is unaffected with the higher curing temperatures required by some Polyamides, BMI resins and other resin systems.
Accommodates “Vertical Prepreg lay-ups” very well
Part release and removal is unmatched
Mold tool cleanup of flashing, requires little to no effort, nor use of metal scrapers or sanding.
HS-940 has no “free silicones” 100% no transfer to the part face.
HS-940 works with all current resin systems and mold substrate types

14. Huntington Specialty Materials
HS- 950 High Temperature Primer
Offers intra & inter coat adhesion
properties to those more difficult
to bond to substrate surfaces ;
(such as silicone sheeting)
HS-955 Clear Primer for bonding to flexible substrates
Allows for better adhesion of
typical automotive type paints

15. Huntington Specialty Materials
HS-965 Chromate-Free
Polysilazane Based Primer –
Protection without Heavy-Metals,
Thin Film Build – less weight gain
ASTM B117 5% salt fog; hrs
0.5 to 1.0 mil coating applied on
Alodine 600 treated aluminum panel
* Image is a pre-test panel

16. Huntington Specialty Materials
HS-970 Nano-Ceramic Solid Tone Coating;
Offers – Super Durable Abrasion Resistance,
Operates at Extended High Temperatures
Direct Flame Ablative Resistance
Extremely Corrosion & Chemical Resistance
Not affected by Fuels, Oils or Solvents
May be applied to a wide variety of products

17. Huntington Specialty Materials
HS-752 “A Polysilazane Matrix” High Performance Composite 2-part Resin System
Operates at Elevated Temperatures
TG by DMA 245 C / 473 F
Offering high performance properties
Tensile Modulus: 215,000 PSA
Functions with all fabric types -
Works with Wet-lay-up, Pre-Preg, VARTM, & Filament winding processes

18. Huntington Specialty Materials
HS-980 Thermal Management –
Polysilazane Nano-Ceramic Coating
Greatly Reduces Radiated Heat from
hot sources
Protects Thermally Sensitive Structures
& Components from excess Heat sources
Holds up to against extreme temperatures ,
corrosion & direct flame ablation
Reduce and Protect against Radiated Heat

19. Huntington Specialty Materials
High Points Reviewed
Polysilazane Nano-Ceramics offer Covalent Bonding
Polysilazane Nano-Ceramics offer Chemical & Corrosion Resistance
Polysilazane Nano-Ceramics offer UV and Weathering Resistance
Polysilazane Nano-Ceramics offer Low Coefficient of Friction
Polysilazane Nano-Ceramics offer Thermal control Options
Polysilazane Nano-Ceramics are RoHS compliance & VOC Exempt
600 West Germantown Pike, Suite 400 # Plymouth Meeting, PA 19462c