1. © 2012 Autodesk “Clash of The Design Teams” using Autodesk BIM 360 Glue & Revit Jason Jones Jason Waddell PES Structural Engineers The Beck Group BIM Program Manager BIM Manager

2. © 2012 Autodesk Class Summary  In this case study we will provide insight into a web based workflow where the entire design team took responsibility in identifying, reporting, and resolving clashes against their discipline’s major systems. The team utilized Autodesk BIM 360 Glue and Autodesk Revit to achieve continuous clash reporting throughout the design process. This effort was affective in mitigating the mountain of clashes that can occur at the end of CD’s had the process not been implemented early and on a consistent schedule with all design disciplines. We will identify lessons learned including both pros & cons experienced with this workflow.

3. © 2012 Autodesk Learning Objectives At the end of this class, you will be able to:  Obtain design team buy-in for this proactive workflow  Understand key strategies for project setup in both Autodesk Revit & BIM 360 Glue  Implement a Model Coordination process that involves the entire design team  Understand the roundtrip workflow of creating Clash reports in Autodesk BIM 360 Glue & resolving the clash in Autodesk Revit.

4. © 2012 Autodesk Design Team Buy-in

5. © 2012 Autodesk Design Team Buy-in  Design Fee  Licensing  Training  Process Map

6. © 2012 Autodesk Project Set Up

7. © 2012 Autodesk Project Set Up File Naming Conventions Revit Project and Shared Coordinates Autodesk BIM 360 Glue

8. © 2012 Autodesk Revit Coordinate System Project Internal Coordinate Shared Coordinate or Survey Point Relative Coordinate State Plane Coordinate System NAD 83

9. © 2012 Autodesk Project Set Up: File Naming

10. © 2012 Autodesk Project Set Up: Coordinate System

11. © 2012 Autodesk Model Coordination Process

12. © 2012 Autodesk Model Coordination Process

13. © 2012 Autodesk Model Coordination Process Authoring Model Autodesk Revit 2013 Upload Revit Model to BIM 360 Glue via add in Perform Clash Detection in BIM 360 Glue Send Notification to Specific Design Team Discipline Resolve Clash in Autodesk Revit 2013

14. © 2012 Autodesk Model Coordination Process - REVIT  Coordinate System  Send Model  3D View Set Up  BIM 360 Glue Add In

15. © 2012 Autodesk Model Coordination Process – BIM 360 GLUE  Merge Models  Transform Coordinate System  Visually Inspect Model  Perform Clash Detection  Send Notification

16. © 2012 Autodesk Model Coordination Process - REVIT  BIM 360 Glue Add In  View Filters for Efficiency  Resolve Clash  Upload to BIM 360 Glue

17. © 2012 Autodesk Workflow Demonstration

18. © 2012 Autodesk Workflow Demonstration  Run a Clash Report in BIM 360 Glue  Send a Notification From BIM 360 Glue

19. © 2012 Autodesk Workflow Demonstration  Utilize View Filters in Revit to Isolate Clashing Elements  Resolve the Clash

20. © 2012 Autodesk Team Buy-in BIM Execution Plan Proper Coordinate System Transform Models in BIM 360 Glue Team Communication Revit Filters Take Aways / Lessons Learned

21. © 2012 Autodesk Autodesk, AutoCAD* [*if/when mentioned in the pertinent material, followed by an alphabetical list of all other trademarks mentioned in the material] are registered trademarks or trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names, or trademarks belong to their respective holders. Autodesk reserves the right to alter product and services offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document. © 2012 Autodesk, Inc. All rights reserved. Jason Jones jjones@pesengineers.com Jason Waddell JasonWaddell@beckgroup.com