1. Wireless Fidelity 1 1

2. Introduction
Wireless Technology is an alternative to Wired Technology, which is commonly used, for connecting devices in wireless mode.
Wi-Fi (Wireless Fidelity) is a generic term that refers to the IEEE communications standard for Wireless Local Area Networks (WLANs).
Wi-Fi Network connect computers to each other, to the internet and to the wired network.
Wi-Fi works on physical and data link layer.

3. Purpose
The purpose of Wi-Fi is to hide complexity by enabling wireless access to applications and data, media and streams.
The main aims of Wi-Fi are the following:
make access to information easier
ensure compatibility and co-existence of devices
eliminate cabling and wiring
eliminate switches, adapters, plugs, pins and connectors

4. Wi-Fi Alliance
The Alliance promotes standards with the aim of improving the interoperability of wireless local area network products based on the IEEE standards.
The Wi-Fi Alliance, a consortium of separate and independent companies, agrees on a set of common interoperable products based on the family of IEEE standards.
The Wi-Fi Alliance certifies products via a set of defined test- procedures to establish interoperability.

5. The Wi-Fi Technology IEEE 802.11b IEEE 802.11a IEEE 802.11g
Wi-Fi Networks use Radio Technologies to transmit & receive data at high speed:
IEEE b
IEEE a
IEEE g
IEEE n

6. IEEE 802.11b Appear in late 1999 Operates at 2.4GHz radio spectrum
11 Mbps (theoretical speed) - within 30 m Range
4-6 Mbps (actual speed)
30-45 mtr range
Most popular, Least Expensive
Interference from mobile phones and Bluetooth devices which can reduce the transmission speed.

7. IEEE 802.11a Introduced in 2001 Operates at 5 GHz (less popular)
54 Mbps (theoretical speed)
15-20 Mbps (Actual speed)
15-25 mtr range
More expensive
Not compatible with b

8. IEEE 802.11g 30-45 mtr range Introduced in 2003
Combine the feature of both standards (a , b)
30-45 mtr range
54 Mbps Speed
2.4 GHz radio frequencies
Compatible with ‘b’

9. IEEE 802.11n Adding multiple-input multiple-output antennas (MIMO).
Operates on both the 2.4 GHz and the lesser-used 5 GHz bands.
Maximum net data rate from 54 Mbit/s to 600 Mbit/s.

10. Elements of a WI-FI Network
Access Point (AP) - The AP is a wireless LAN transceiver or “base station” that can connect one or many wireless devices simultaneously to the Internet.
Wi-Fi cards - They accept the wireless signal and relay information. They can be internal and external.(e.g PCMCIA Card for Laptop and PCI Card for Desktop PC)
Safeguards - Firewalls and anti-virus software protect networks from uninvited users and keep information secure.

11. How a Wi-Fi Network Works
Basic concept is same as Walkie talkies.
A Wi-Fi hotspot is created by installing an access point to an internet connection.
An access point acts as a base station.
When Wi-Fi enabled device encounters a hotspot the device can then connect to that network wirelessly.
A single access point can support up to 30 users and can function within a range of 100 up to 300 feet.
Many access points can be connected to each other via Ethernet cables to create a single large network.

12. Wi-Fi Network Topologies
AP-based topology (Infrastructure Mode)
Peer-to-peer topology (Ad-hoc Mode)
Point-to-multipoint bridge topology

13. AP-based topology The client communicate through Access Point.
BSA-RF coverage provided by an AP.
ESA-It consists of 2 or more BSA.
ESA cell includes 10-15% overlap to allow roaming.

14. Peer-to-peer topology
AP is not required.
Client devices within a cell can communicate directly with each other.
It is useful for setting up of a wireless network quickly and easily.

15. Point-to-multipoint bridge topology
This is used to connect a LAN in one building to a LANs in other buildings even if the buildings are miles apart.
These conditions receive a clear line of sight between buildings.
The line-of-sight range varies based on the type of wireless bridge and antenna used as well as the environmental conditions.

16. Wi-Fi Configurations

17. Wi-Fi Configurations

18. Wi-Fi Configurations

19. Wi-Fi Security Techniques
Authentication
Privacy
Service Set Identifier (SSID)
Wired Equivalent Privacy (WEP)
802.1X Access Control
Wireless Protected Access (WPA)
IEEE i

20. Advantages Mobility Ease of Installation Flexibility Cost Reliability
Security
Use unlicensed part of the radio spectrum
Roaming
Speed

21. Limitations OR Disadvantages
Interference
Degradation in performance
High power consumption
Limited range

22. Conclusion
Wi-Fi provides freedom: freedom to physically move around your home or business and still stay connected to the internet or local network; freedom to grow and move an office or business without having to install new cables and wires, freedom to be connected while travelling and on the road .

23. THANK YOU