1. How to connect your brick
to Bluetooth

2. You CAN NOT be logged into LabVIEW when connecting to Bluetooth
Step one
IMPORTANT
You CAN NOT be logged into LabVIEW when connecting to Bluetooth
Bottom right corner press the up arrow to find the Bluetooth symbol
Click on this symbol
Go to the task bar on the bottom right of the screen and look for the Bluetooth symbol. Its either in the bottom right corner or under the up arrow.
If it is not there, go to the control panel under the start menu and find
Devices and Printers

3. Once you click on the symbol you want to select SHOW BLUETOOTH DEVICES The devices connected will appear, if any.

4. The computer will search for your bricks number
Connecting your brick
Click on Add Device
The computer will search for your bricks number
When your number pops up click on it
Your brick will BEEP
DO NOT PUSH ANYTHING
Each brick is labeled with a number This number can be found in the top middle of the bricks screen, NOT the one written on the brick.

5. Wait until this box pops up
Enter pairing code (2nd option)
Its then asks for the pairing code
(NEXT SLIDE)
1234 on the computer and press Enter

6. 1234 on the computer and press Enter
Type in Pairing Code
1234 on the computer and press Enter
Once Entered Press the Orange button
On your brick
Pairing code 1234

7. Bluetooth Accepted
If the message below (in the bottom right corner) pops up or the message Install Successfully pops up, you are connected

8. You can now login to labview
And program your robot!