1. Bonneville Junior High’s Locker Program
LOCKERGM
Bonneville Junior High’s Locker Program

2. To start the LOCKERGM program:
Open your Internet Explorer and type in the
following URL address:
A log in page appears where you must type
in a valid User Name (This is your 7 digit
student id number.)
And your password (which is set at Viking1 until
you change it).
Click on the login button.
Notice the Lost Password? This is always
available to you and the how to reset your
password will be at the end of the login
instructions.

3. You will be directed to your home screen after logging in.
You will want to fill in the blank information under Student Profile on the Home Screen:
Address: This is how the system will send you a temporary password , and any school locker information.
Home Room: should be your advisory teacher name. If you have two use A day.
Phone: Please enter a current phone number.
Manual Change: This is where you will change your password, lets do that now. Click on the Manual Change button.
Save: Be sure to click the save button when finished.

4. Combination Look Up
On the left hand side or your home screen, you will see your locker information.
Locker #: A stands for the building and the number is the locker assigned to you.
Start/End: The length of time the locker is checked out to you.
Combination: If you click on the word combination a new screen will pop up.
Your combination will appear in the new window. Please be sure to write it down.
Click ok when finished.
BE SURE TO LOGOUT by clicking on the word logout.

5. Lost Password Enter your 7 digit student id number.
Enter your address you used to set up your profile.
Type in the text exactly as you see it in the box above.
Press the Reset Password.
A temporary password will be sent to the you provided. Be sure to change your password once you get into the program.

6. Reset Your Password
The Change Password screen will come up on the computer.
Type in your old password or the temporary password that has been ed to you.
Decide on a new password that includes at least one capital letter, and numbers. Write it down.
Type in your new password.
Type in your new password again in the confirm password.
Click on the Change Password button.

7. After your password change.
A new pop up window will appear confirming your password changed.
Click ok.
You will be taken back to the Login screen.
You are now ready to begin using the LockerGM program.
After you login you will be taken to your student home screen.