1. SIP Speakers and IP Audio Amplifiers
SipComStage
SIP Based Audio Over IP
SIP Speakers and IP Audio Amplifiers
Special VoIP Communication Systems, IP Paging Systems, Signaling and Alarm.
By TEMA TELECOMUNICAZIONI S.r.l. (2017)
UNI EN ISO 9001:2008

2. The Company TEMA is a certified company ISO9001: 2008
From over "Twenty five years with the customer“
Products with CE and ROHS certification
Focus: “IP Communication and Security”
All products are entirely developed and manufactured in Italy, with direct assistance and long-term guarantee

3. technology areas AUDIO OVER IP VoIP SIP and Analog
DOORPHONES NTERCOMS AUDIO-VIDEO VoIP SIP and Analog
CALL
RECORDERS
VOICE MAIL & VOICE PROCESSING
GSM-UMTS-LTE
GATEWAYS ROUTERS
SECURITY
ALARMS
SIGNALINGS

4. THE PRODUCTS RECORDERS VOICE MAIL & PROCESSING GATEWAYS GSM-UMTS
AUDIO OVER IP SIP
INTERCOMS
VoIP SIP
RECORDERS
VOICE MAIL &
PROCESSING
GATEWAYS
GSM-UMTS
SECURITY
ALARMS

5. How technology can be useful
SipComStage
Broadcast announcements on SIP speakers from each phone
Repeat the phone call (Night Ringer)
VoIP SIP Interface to a Paging System
Music broadcast in Multicast channels, interrupted by announcements
Hands-free talking through the AD630 SIP speakers
Generate an emergency or warning call with pre-recorded messages

6. How technology can be useful
SipComStage
Realize IP Paging Systems without the need of a PBX (in Peer to Peer mode), just a SIP phone, a generic switch, and a LAN cable
Broadcast messages or pre-recorded sounds, user-selectable and customizable
Managing one or more relay remotely via LAN
"Monitor" a zone through the microphone built into the AD630 SIP speakers
Automatic broadcast of warning messages following an external command or event
Activate external devices: sirens, warning lights, etc.

7. BEnefits
SipComStage
No expensive audio cables for speakers, everything is integrated into the LAN network, no analog amplifier needed
Flexibility in configuration and plant expansions
Innovative features and performances
Remote control and supervision from all over the world
Multi-site operation, in any geographical location
Compatibility tested with all IP-PBX brands on the market, including Softphone software, 3CX and Asterisk-based systems

8. Products AD610 AD611 AD612 AD615 AA-600 AD630 AD635 AD633 AD633C
SIP PoE Amplifier 4W (2+2W) output with transformer for external amplifiiers
AD611
SIP PoE Amplifier
10W (2 x 5W)
AD612
SIP PoE Amplifier
40W (2 x 20W)
AD615
Multicast
Encoder
AA-600
IP SIP Intercom
Camera and Amplifier 20W
Products tested with the most common Pbx brands:
SIEMENS - AVAYA - ALCATEL – PANASONIC – SAMSUNG – NEC - 3CX - WILDIX - AASTRA - ASCOM - VT NITSUKO - SELTA – PHILIPS … e altre marche di IP-PBX
Including Softphone, 3CX and Asterisk systems
Videoconsole APP for iOS and Android
Videoconsole Software for PC
AD630
SIP 25W Horn with internal amplifier 40W (2x20W)
AD635
SIP 12W Speaker wall mount
AD633
SIP 12W Speaker ceiling mount
AD633C
SIP 12W Speaker ceiling mount with
flameproof cover

9. APP Videoconsole per iOS e Android
TARGET
Video Surveillance: deterrent alerts to malicious in video controlled areas
Companies, Offices, Buildings, Industries, Warehouses, Garages, Supermarkets, Parkings
Public places and outdoor public areas
Hospitals, Schools, Campus, Sports Facilities
Railway Stations, Airports, Ports
Alarm and Alert systems
APP Videoconsole per iOS e Android

10. AD610 SipComStage AD610 IP SIP PoE Audio Amplifier 4W (2+2W)
Multifunction Interface for External PA Paging Amplifiers
First isolated audio output with transformer
Second audio output for 2W external speaker
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
Fault detection of the external amplifier
1 relay remote controlled via LAN
1 External contact input for various alternative functions including "SIP
Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

11. AD610 – Typical application
SipComStage

12. AD610 – Typical application
SipComStage

13. AD610 – installation
SipComStage

14. AD611 SipComStage AD611 IP SIP PoE Audio Amplifier 10W (5+5W)
2 5+5W audio outputs for external passive speakers
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
1 relay remote controlled via LAN
1 External contact input for various alternative functions including
"SIP Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

15. AD612 SipComStage AD612 IP SIP PoE Audio Amplifier 40W (20+20W)
W audio outputs for external passive speakers
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
1 relay remote controlled via LAN
1 External contact input for various alternative functions including
"SIP Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

16. AD611 – Typical application
SipComStage

17. AD612 – Typical application
SipComStage

18. AD611, AD612 – installation
SipComStage

19. AD630 SipComStage AD630 IP SIP PoE Horn 40W (20+20W)
Internal Amplifier 40W (20+20W)
Second 20 W audio output for external passive speakers
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
Built-in microphone (bidirectional communications)
2 inputs for external call buttons
2 relays remote controlled via LAN
1 External contact input for various alternative functions including
"SIP Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

20. AD630 – Typical application
SipComStage

21. AD630 – installation
SipComStage

22. AD633 SipComStage AD633 IP SIP PoE Ceiling Speaker 12W (6+6W)
Internal Amplifier12W (6+6W)
Second 6W audio output for external passive speakers
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
Built-in microphone (bidirectional communications)
2 inputs for external call buttons
2 relays remote controlled via LAN
1 External contact input for various alternative functions including
"SIP Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

23. AD633 – application
SipComStage

24. AD633 – installation
SipComStage

25. AD633C
SipComStage
AD633C IP SIP PoE Ceiling Speaker 12W (6+6W) with flameproof cover, IP54
Internal Amplifier 12W (6+6W)
Second 6W audio output for external passive speakers
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
Built-in microphone (bidirectional communications)
2 inputs for external call buttons
2 relays remote controlled via LAN
1 External contact input for various alternative functions including
"SIP Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

26. AD633C – Application
SipComStage

27. AD633C – installation
SipComStage

28. AD635 SipComStage AD635 IP SIP PoE Wall Speaker 12W (6+6W)
Internal Amplifier 12W (6+6W)
Second 6W audio output for external passive speakers
1st SIP account to receive calls for announcements
2nd SIP account for Night Ringer service
Built-in microphone (bidirectional communications)
2 inputs for external call buttons
2 relays remote controlled via LAN
1 External contact input for various alternative functions including
"SIP Security Info Call" service from external contact
5 Multicast channels with priority levels
Internal SD memory card with customizable audio files
P2P Peer to Peer operation
Audio Channels volumes with independent adjustment

29. AD635 – ApplicaTion
SipComStage

30. AD635 – installation
SipComStage

31. OptionALS and Accessories
AA-39DL
Plug Power Supply 220Vac/12Vdc-1,0A.
AD301R
30W analog amplifier, 2 channels, Volume-High-Low +/-12dB controls
AA-39D1A
DIN Power Supply 220Vac/15Vdc-1,0A.
AD320/30
PA 100V audio line transformer 30W, constant voltage, high efficiency toroidal type with low magnetic flux leakage.
AA-39P4
PoE injector 230Vac/48Vdc 0,5A.
AD32
Isolation transformer, balanced, mixer, attenuator, audio signal filter, low impedance output. Ideal for decoupling devices of audio sources to other amplifiers to eliminate noises.
AA-39E3 /AA-39E6V
DIN Power Supplies 220Vac/24Vdc-1,5A
220Vac/24Vdc-2,5A.
AA-697xxx
Flash lights with Xeon lamp or high brightness LEDs. Ideal to be controlled by the relay of the IP-SIP speakers of the AD630 series or by the IP-SIP amplifier AD610, AD611, AD612 modules, with a call in progress add a light signal to the acoustic signal.
AA-36
Protected Power Relay Actuator 250Vac/16A/4KVA, command in AC/DC 12V/24V, 1 contact, Led, contacts protected by electric arcs. Ideal for driving loads up to 4.000W.

32. PASSIVE SPEAKERS AD330/25T AD335/06TP AD330/15T AD337/06TP AD333/12XTP
Ideal to be connected to the AD modules or as 2nd passive speaker to the IP-SIP speakers of the AD63x series
AD330/25T
Horn Speaker 25W / 8Ohm with transf. 100V, sockets 25/12.5/6.25/3.12 W, response 300Hz - 7KHz, Dim. Diam. 240 x 290 mm
AD335/06TP
Wall Speaker 6W / 8Ohm Transf. 100V sockets 6/3/1.5 W, response 180Hz - 16KHz, Dim. 218 x 216 x 120 mm. Ideal to be connected to the AD modules or as 2nd passive speaker to the IP-SIP speakers of the AD63x series.
AD330/15T
Horn Speaker 15W / 8Ohm with transf. 100V, sockets 15/7.5/3.7/1.9 W, response 300Hz - 7KHz, Dim. Diam. 210 x 240 mm
AD337/06TP
Oval wall speaker 6W / 8Ohm with transf. 100V sockets 6/3/1.5W, response 180Hz - 10KHz, Dim. 258 x 169 x 72 mm, 0,8Kg
AD333/12XTP
Round speaker ceiling flush mounting, 12W with Transf. 12/6/3 W Band 80Hz - 20KHz, Dim. Diam. 220 x 130 mm (Hole mm) with flameproof cover AD333/12YC. Ideal to be connected to the AD modules or as 2nd passive speaker to the IP-SIP speakers of the AD63x series
AD334/20TP
Vandal proof Projector 20W with transf. 100V, outdoor, sockets 20/10/5 W, IP65, response 150Hz - 15KHz, Dim. Diam. 180 x 145 mm, weight 2.4kg, grey color
NOTE: The speakers listed above are not produced by TEMA, but a selection of the best third-parties quality producers that are best suited to our production amplifiers and PA analog speaker systems and IP VoIP SIP for audio LAN. The components offered however fall into the corporate policies in terms of warranty and technical support.
AD333/12TP
Round speaker wall/ceiling flush mounting, 12W with Transformer 12/6/3 W, response 80Hz - 15KHz, Dim. Diam. 200 x 62 mm (Hole mm)

33. Multicast ApplicaTIONS
SipComStage
In a LAN network the Multicast term refers to the possibility to distribute informations to a group of IP terminals. For multicast are used Class D addresses that range from 224.x.x.x up to 239.x.x.x. The AD600 systems are able to receive audio in Multicast in the specific IP channel and play it on the connected speaker. The audio can be generated by a PC software application (for example the free VLC application) or directly from a SIP IP phone. The received audio streaming is useful for playing announcement voice messages, also called "Paging" mode. Audio streaming using multicast is unidirectional, in the sense that the audio stream is sent from the source to the destination but not vice versa. The audio stream can be simultaneously sent to multiple terminals that all have the same IP Multicast address, or to distinct terminals (each has its own IP address). It is possible to program up to 5 Multicast streaming receive addresses, each with its own priority, so that the same terminal if it is already playing audio (eg music) can be interrupted by a higher priority stream (eg an announcement). The audio supported by this mode must be in G.711 format (aLaw or μLaw).

34. Multicast Applications
SipComStage

35. Multicast applications
SipComStage

36. Multicast applications
SipComStage

37. Multicast Applications
SipComStage

38. Vlc software
With the free VLC sofware downloadable from it is possible to turn your Windows PC into an Encoder generator on a multicast IP address that can play a recorded audio file In WAV format 8KHz-16 Bit mono. A file of any duration can be an announcement or a music compilation to be transmitted as a background to all AD600 listening systems on one or more multicast transmission reserved addresses.
Replace this text with the name of your .WAV audio file recorded at 8KHz-16Bit Mono
Replace this text with the desired multicast IP address, or keep the address shown and configure it on AD600 devices

39. Audacity software
For recording your audio files, it is possible to use one of the free softwares such as AUDACITY downloadable for free from the link remembering to record and save audio files in .WAV format at 8KHz-16Bit Mono, other audio file formats will not work with the AD600 series devices. Below there are some informations about basic operations. For more information on the AUDACITY program, please refer to the manufacturer program guide.

40. Special Applications
SipComStage

41. Special Applications
SipComStage

42. Special Applications SipComStage “Environment Monitor”
The AD630 SIP speakers series are equipped with microphone that can be activated unidirectionally to the caller with a DTMF code for listening to the environment. With another code it is possible to have bidirectional communication.

43. Possible 2nd passive speaker 8 ohm mod. AD335 / 06TP
Special Applications
SipComStage
“Push to Talk”
Possible 2nd passive speaker 8 ohm mod. AD335 / 06TP
AD635 SIP PoE Speaker
"Push To Talk"
Call Button
The button connected to AD635 generates a SIP call to another remote terminal to which the communication direction is managed by the same button. E-Learning service with remote teacher.

44. Special Applications SipComStage Emergency-Alert
By pressing the alert-emergency button, the AD630 IP horn will be activated and will play an alarm sound or a pre-recorded message and makes a call to a pre-set number. A remote operator can enter into communication and make an announcement or can start playing sounds and pre-recorded messages.

45. “IP COMMUNICATION AND SECURITY COMPANY”
Thank you!
“IP COMMUNICATION AND SECURITY COMPANY”
TEMA TELECOMUNICAZIONI S.r.l. Web:
Headquarter : Via Costante Girardengo, 1/ Milano MI (Italy) Tel Fax
Branch Office : Via Luca Gaurico, 9/ Roma RM (Italy) Tel