1. Pb-free Electronics Risk Management (PERM) Council
Meeting #33 Agenda
A Virtual Conference Hosted by IPC
26-27 July 2017
POC:
John Perry
Director, Printed Board Standards & Technology
IPC — Association Connecting Electronics Industries®
(tel)

2. Logging In to the Virtual Conference
1) Please register for the PERM 33 Virtual Conference well ahead of the conference dates. When you register for the event, you will receive a confirmation that will allow you to have the event added to a calendar (e.g. Outlook, Google, Yahoo!, etc.).
2) It is advised that you log into the PERM 33 Virtual Conference minutes ahead of the scheduled start time to verify your ability to log into the conference, following the login directions within your registration confirmation . You can also select “check system requirements” to test your connectivity.
3) If you are encountering problems logging in through the web link provided in your meeting invitation, go to and select the “Join A Webinar” link in the upper right hand corner. Then enter the following 9-digit meeting ID of followed by your address and click on “Join”. Alternately you may try for help with login issues.
4) None of the above works! If you are unable to log in to the Virtual Conference, you may join the audio bridge by dialing +1 (914) using the access code of You can access the presentation files at the 8-80 PERM KAVI Workspace site located at Select the “Documents” tab to access the presentation files in the “PERM 33 Virtual Conference Presentations” folder.

3. Posting Questions Within the Virtual Conference
1) If you have been successful in logging in to the Virtual Conference through the GoToWebinar system, be sure you have entered your Audio PIN provided upon login so that your audio bridge is linked to your login. This will enable you to post questions and/or enable you to speak with presenters and attendees.
2) During the Q&A portion of each presentation, or during any wrap up Q&A at the conclusion of the days presentations, you may use the GoToWebinar interface to “Raise your Hand”. This allows the meeting organizer to unmute your audio bridge so that you can voice your question. Alternately, you may submit a text question that the organizer can then read off to the presenter.
3) If you were unable to log in to the GoToWebinar and wish to have a question answered by the presenter, please send an to with the subject line “PERM 33 Presentation Question” to have your question read off during the Q&A session, or after the conclusion of the Conference.

4. (all times U.S. Eastern Daylight Time)
Wednesday, July 26, 2017
(all times U.S. Eastern Daylight Time)
9:30 – 10:00 Log-In/Check-In to Virtual Meeting
10:00 – 10:10 Welcome and PERM Council Overview (David Pinsky, Raytheon)
10:10 – 10: D Pb-free Design Guide Working Group Update (Tony Rafanelli, Raytheon)
10:30 – 11:15 NPL Report on Sn Whisker Testing with Conformal Coatings (Martin Wickham, National Physical Laboratory)
11:15 – 12:00 Characterization of the Capability of Conformal Coating to Inhibit Tin Whisker Growth (David Hillman, Rockwell Collins)
12:00 – 12:15 Intermission
12:15 – 12:45 Pb-free in Automotive Electronic Standards I (Bob Knoell, NXP Semiconductor)
12:45 – 13:15 IEC Standards Update (David Burdick, Boeing Company)
13:15 – 14:00 SAE G-24 Standard Status Review (Anduin Touw, Boeing Company)
14:00 – 14:15 Wrap-Up and Q&A
14:15 Adjourn

5. (all times U.S. Eastern Daylight Time)
Thursday, July 27, 2017
(all times U.S. Eastern Daylight Time)
9:30 – 10:00 Log-In/Check-In to Virtual Meeting
10:00 – 10:30 IPC Conformal Coating Round Robin Test Update (David Hillman, Rockwell Collins)
10:30 – 11:15 Pb-free in Automotive Electronic Standards II (James McLeish, DfR Solutions)
11:15 – 11: F Tin Self Mitigation Task Group Update (David Pinsky, Raytheon)
11:45 – 12:00 Intermission
12:00 – 12:45 Tin Whisker Mitigation Systems (Stephan Meschter, BAE Systems)
12:45 – 13:00 Upcoming PERM Meetings (David Pinsky, Raytheon)
13:00 – 13:20 Wrap-Up and Q&A
13:20 Adjourn