1. Induction Motor as a Induction Genrator

2. • Induction motor operating as a generator
– consider a frictionless vehicle powered by a squirrel-cage induction motor
that is directly coupled to the wheels
– as the vehicle climbs a hill, the motor runs at slightly less than synchronous speed,
delivering a torque sufficient to overcome the force of gravity
• electric energy converts to kinetic energy then potential energy
– at the top of the hill or on level ground, the force of gravity does not come into
play and the motor runs unloaded and very close to synchronous speed
– as the vehicle descends a hill, the motor runs slightly faster than synchronous speed
and develops a counter torque that opposes the increase in speed
• potential energy converts to kinetic energy then electric energy

3. Generator Operation • In generator operation
– the rotor spins above synchronous speed
– it develops a counter-torque that opposes the overspeed
• same effect as a brake
– the rotor returned the power as electrical energy instead of dissipating it as heat
• referred to as asynchronous generation
• kinetic energy is converted into electrical energy
– the motor delivers active power to the electrical system
– the electrical system must provide reactive power to create the stator’s rotating
magnetic field
• Active power delivered to the line is directly proportional to the slip
– higher engine speed produces greater electrical output
– rated output power is reached at very small slips, |s | < 3%

4. Reactive power sources
Capacitor across the motor may supply the vars
The motor supplies 3 phase electrical load without an external 3 phase supply.
Frequency generated is slightly less than corresponding to speed of rotation.
The terminal voltage increases with capacitance but limit by iron saturation.
Insufficient capacitance causes the voltage not to build up
Capacitors must supply at least the vars normally absorbed when machine operates as a motor

5. Generator equivalent circuit