1. 6/22/2016 “IN THE NAME OF ALLAH THE MOST MERCIFUL AND THE MOST BENEFICIAL”

2. 6/22/2016 POWER ELECTRONICS Presented By: Engr.Tafseer Ahmed BS in Electrical (Electronics) Engineering CIIT, Abbottabad a.tafseer@gmail.com

3. 6/22/2016 What is Power Electronics Power electronics deals with the applications of power semiconductor devices such as Thyristor and transistors for the conversion and control of electrical energy at high power levels.

4. 6/22/2016 4 Relationship of Power Electronics

5. 6/22/2016 Elements of Power Electronics Analogue circuits Control Systems Power Systems Electronics Devices Electric Machines Numerical Simulation

6. 6/22/2016 POWER ELECTRONICS MAIN AREAS As the technology for the power semiconductor devices and integrated circuit develops, the potential for applications of power electronics become wider. The power semiconductor devices or power electronic converter fall generally into four categories : Thyristor Devices AC to DC Converter (Controlled Rectifier) DC to DC Converter (DC Chopper) AC to AC Converter (AC voltage regulator) DC to AC Converter (Inverter)

7. 6/22/2016 Diagram Block of Converters

8. 6/22/2016 AC to DC Converters: An AC to DC converter circuit can convert AC voltage into a DC voltage. The DC output voltage can be controlled by varying the firing angle of the thyristors. The AC input voltage could be a single phase or three phase. AC to AC Converters: This converters can convert from a fixed ac input voltage into variable AC output voltage. The output voltage is controlled by varying firing angle of TRIAC. These type converters are known as AC voltage regulators. DC to DC Converters : These converters can converte a fixed DC input voltage into variable DC voltage or vice versa. The DC output voltage is controlled by varying of duty cycle. DC to AC Converters: These converters can convert a constant DC input voltage into a variable AC voltage with variable frequency.

9. 6/22/20169

10. 10

11. 6/22/201611

12. 6/22/201612

13. 6/22/2016 1.Uncontrolled turn on and off (Power Diode) 2.Controlled turn on uncontrolled turn off (Thyristors) 3.Controlled turn on and off characteristic (Power Transistor, BJT, MOSFET, GTO, IGBT) 4.Continuous gate signal requirement (BJT, MOSFET, IGBT) 5.Pulse gate requirement (SCR(Silicon-Controlled Rectifier), GTO) 6.Bidirectional current capability (TRIAC) 7.Undirectionalcurrent capability (SCR, GTO, BJT, MOSFET, IGBT) POWER ELECTRONIC SWITCHING DEVICES

14. 6/22/2016 COMMONLY USED DEVICES Power Diodes Power Transistors Thyristor Family SCR( Silicon Controlled Rectifier) SCS( Silicon controlled Switch) GTO( Gate Turnoff Thyristor ) The DIAC The TRIAC MCT( The MOS-Controlled Thyristor)

15. 6/22/2016 Devices Along with Symbols & Characteristics

16. 6/22/2016 16 Power Ratings of Devices

17. 6/22/2016 17 Ratings of Power Devices

18. 6/22/2016 18 Applications of Power Devices

19. 6/22/2016 19 Control Characteristics of Devices

20. 6/22/2016 20 Control Characteristics of Devices

21. 6/22/2016 21 Uncontrolled Rectifiers (AC to DC)

22. 6/22/2016 Controlled Rectifier( AC to DC) AC to DC Converters -Single phase, half wave AC to DC converter Input voltage Output average voltage : rms value of Output voltage : Waveform of single-phase, half wave AC to DC converter α

23. 6/22/201623 AC-DC Rectifier( Full Wave)

24. 6/22/2016 24

25. 6/22/2016 25 AC-AC (Voltage Regulator)

26. 6/22/2016 26 AC to DC Converters Single phase, Full wave AC to DC converter The average output voltage can be found from :

27. 6/22/2016 27 AC to DC Converters Three-phase, Half wave AC to DC converter If the phase voltage is : van= Vm Sin(wt). The average output voltage for a continuous load current is :

28. 6/22/2016 28 AC to DC Converters Three-phase, Full Wave AC to DC converter

29. 6/22/2016 29 DC-DC CONVERTER (DC Chopper) In many industrial application, DC-DC converter is required to convert a fixed-voltage DC source into a variable-voltage DC source. Like a transformer, DC-DC converter can be used to step down or step up a DC voltage source. Application : Traction motor control in electric automobiles, trolley cars, marine hoists, forklift trucks, mine haulers, etc Advantages : High Efficiency and fast dynamic response

30. 6/22/2016 30 DC-DC CONVERTER (DC Chopper) Principle Of Step-Down Operation When the switch SW is closed for a time t 1, the input voltage V s appears across the load V o = V s. If the switch remains off a time t 2, the voltage across the load is zero, V o = 0. The converter switch SW can be implemented by using Transistor, MOSFET, GTO, IGBT, BJT, etc.

31. 6/22/2016 31 The average output voltage is given by : The average output current is given by : The rms output voltage is given by : = Where : T is the chopping period k = t1/T is the duty cycle f = 1/T is chopping frequency

32. 6/22/2016 32 STEP UP DC to DC CONVERTER When switch SW is closed for t 1, the inductor current rises and energy is stored in the inductor L. If the switch SW is opened for time t 2, the energy stored in the inductor is transferred to load through diode D 1 and the inductor current falls.

33. 6/22/2016 33 When this DC to DC converter is turned on “switch SW is closed, the voltage across the inductor L is : And this gives the peak-to-peak ripple current in inductor as The average output voltage is :

34. 6/22/2016 34 Buck – Boost Regulators A buck – boost Regulator provides an output voltage that may be less than or greater than the input voltage- hence the name "buck-boost"; the output voltage polarity is opposite to that of the input voltage. this regulator is also known as an inverting regulator. The circuit operation can be divided into two modes. during mode 1, transistor Q1 is turned on and diode Dm is reversed biased. the input current, which rises flows through inductor L and transistor Q1. During mode 2, transistor Q1 is switched off and the current, which was flowing through inductor L, would flow through L, C, Dm, and the load. The energy stored in inductor L would be transferred to the load and the inductor current would fall until transistor Q1 is switched on again in the next cycle. The equivalent circuit for the modes are shown in the next slide.

35. 6/22/2016 35

36. 6/22/2016 36 DC-AC Converter (Inverter)

37. 6/22/201637

38. 6/22/201638

39. 6/22/2016 39 Examples of Some Applications

40. 6/22/2016