1. MICROPROCESSOR INTEL 8086/8088 BY: SERA SYARMILA SAMEON

2. SERA BW-4-C49 sera@uniten.edu.my http://www.metalab.uniten.edu.my/~sera/Microproc essor Discussion time: refer to my time table paste in front of my room.

3. µP –Intel 8086/8088 Assessment: 1. Coursework 50% * Mid Test – 25% * Lab - 10% * Assignment– 5% * Quiz 1 – 5% * Quiz 2– 5% POP QUIZ 2. Final Exam. 50%

4. Course Contents: 1. Introduction To ComputingIntroduction To Computing 2. MICROPROCESSOR INTEL 8086 FAMILYMICROPROCESSOR INTEL 8086 FAMILY 3. INSTRUCTION SET ANDINSTRUCTION SET AND ASSEMBLY LANGUAGE PROGRAMMING 4. ON-CHIP PHERIPHERAL DEVICESON-CHIP PHERIPHERAL DEVICES 5. TIMER AND INTERRUPTSTIMER AND INTERRUPTS 6. INTERFACING APPLICATIONS ANDINTERFACING APPLICATIONS AND SERIAL DATA COMMUNICATION µP and Digital System

5. 1. INTRODUCTION TO COMPUTING –Numbering systems and digital logics –A basic microprocessor system: the CPU, memory, I/O, and buses subsystems, basic operation of a microprocessor system: fetch and execute cycle –Application of a microprocessor-based system –Comparison between microcontroller and microprocessor

6. 2. MICROPROCESSOR INTEL 8086 FAMILY –Features of the microprocessor family, block diagram and definitions of the pin, I/O port structure, memory organization: general purpose RAM, bit addressable RAM, register bank, special function registers, external memory, memory space mapping and decoding, bus control signals timing, a typical micro-controller based system

7. 3. INSTRUCTION SET AND ASSEMBLY LANGUAGE PROGRAMMING –Addressing modes, the instruction set and typical examples, assembler operation, assembly language format, assembler directives, operation of assemblers and linkers, programming examples –Program control and conditions –Arithmetic & logic instructions

8. 4. ON-CHIP PHERIPHERAL DEVICES –I/O ports: operations and uses of i/o ports, timers: their operations, programming, and applications: operations and programming, typical applications.

9. 5. TIMER AND INTERRUPTS –Timers concepts, timing calculations and counter programming –Organization of the interrupt system, interrupt vectors, interrupt timings, serial port interrupts, and external interrupts, implementation of single and multiple interrupts

10. 6. INTERFACING APPLICATIONS AND SERIAL DATA COMMUNICATION –Basics of serial communication and programming the serial communication interrupt –Interfacing to external memory, keypad, seven- segment LED display, ADC and DAC chips, and input / output port expansion, description and uses of hardware development tools

11. References: Text Book: 1.Triebel A, Singh A, The 8088 and 8086 Microprocessor – Programming, Interfacing, Software, hardware, and application, fourth edition, Prentice Hall, 2003. References: 1.Ytha Yu Caharle Marut Assembly Language Programming and Organization of the IBM PC, Mc Graw Hill. ISBN 0-07-072692- µP –Intel 8086/8088