1. Drafting 2 (Arch) Quiz Review #6 Quiz Review

2. 1.To anchor a stud wall to the subfloor, carpenters nail through the: Sole plate Header Jamb Joists Quiz Review #6

3. 1.To anchor a stud wall to the subfloor, carpenters nail through the: Sole plate Header Jamb Joists Quiz Review #6

4. 2. R-Value is a measure of: Resistance to heat flow Resilience to load deformation in beams Resale value for a particular housing design Water penetration through foundation walls Quiz Review #6

5. 2. R-Value is a measure of: Resistance to heat flow Resilience to load deformation in beams Resale value for a particular housing design Water penetration through foundation walls Quiz Review #6

6. 3. Insulation is placed in: Walls Ceilings Floors All of the above Quiz Review #6

7. 3. Insulation is placed in: Walls Ceilings Floors All of the above Quiz Review #6

8. 4. Where is the vapor barrier located? Underside of rafters Exterior side of sheathing Inside attic space Heated side of insulation Quiz Review #6

9. 4. Where is the vapor barrier located? Underside of rafters Exterior side of sheathing Inside attic space Heated side of insulation Quiz Review #6

10. 5. Section lines indicate: That a surface is foreshortened That a surface is slanted That the material is smooth That the surface has been cut Quiz Review #6

11. 5. Section lines indicate: That a surface is foreshortened That a surface is slanted That the material is smooth That the surface has been cut Quiz Review #6

12. 6. A cutting plane line on an architectural floor plan will typically include: The page number where the section can be found Line coding that consists of two short dashes followed by two long dashes The initials of the architect who created the floor plan Uniformly spaced section lines Quiz Review #6

13. 6. A cutting plane line on an architectural floor plan will typically include: The page number where the section can be found Line coding that consists of two short dashes followed by two long dashes The initials of the architect who created the floor plan Uniformly spaced section lines Quiz Review #6

14. 7. The purpose of a wall section drawing is to: Reveal the internal construction Eliminate having to draw all three views of the subject Give a three-dimensional view of the object Show an inclined surface true size and shape Quiz Review #6

15. 7. The purpose of a wall section drawing is to: Reveal the internal construction Eliminate having to draw all three views of the subject Give a three-dimensional view of the object Show an inclined surface true size and shape Quiz Review #6

16. 8. What is an opening covered with glass or plastic in the roof that allows light and ventilation? Skylight Projection Cornice Eave Quiz Review #6

17. 8. What is an opening covered with glass or plastic in the roof that allows light and ventilation? Skylight Projection Cornice Eave Quiz Review #6

18. 9. What is the horizontal or vertical guideline used for transferring measurements orthographically from one view to another? Flashing Projection Cornice Roof Ridge Quiz Review #6

19. 9. What is the horizontal or vertical guideline used for transferring measurements orthographically from one view to another? Flashing Projection Cornice Roof Ridge Quiz Review #6

20. 10. What is the term for the physical description of land surface showing its variation in elevation and location of features? Grade line Elevation Projection Topography Quiz Review #6

21. 10. What is the term for the physical description of land surface showing its variation in elevation and location of features? Grade line Elevation Projection Topography Quiz Review #6

22. 11. Name the decorative barriers used to enclose porches and decks. Projection Flashing Rail Cornice Quiz Review #6

23. 11. Name the decorative barriers used to enclose porches and decks. Projection Flashing Rail Cornice Quiz Review #6

24. 12. Name the uppermost area of two intersecting roof planes. Flashing Projection Cornice Roof Ridge Quiz Review #6

25. 12. Name the uppermost area of two intersecting roof planes. Flashing Projection Cornice Roof Ridge Quiz Review #6

26. 13. What is the metal used to prevent water from leaking through surface intersections? Stucco Flashing Projection Steel Quiz Review #6

27. 13. What is the metal used to prevent water from leaking through surface intersections? Stucco Flashing Projection Steel Quiz Review #6

28. 14. What is the spot where the soil surface strikes a building that acts as a reference point for most elevations? Elevation Grade line Surface materials Topography Quiz Review #6

29. 14. What is the spot where the soil surface strikes a building that acts as a reference point for most elevations? Elevation Grade line Surface materials Topography Quiz Review #6

30. 15. What is the name of the type of plaster made from Portland cement, sand, water, and a coloring agent that is applied to exterior walls? Stucco Concrete Siding Flashing Quiz Review #6

31. 15. What is the name of the type of plaster made from Portland cement, sand, water, and a coloring agent that is applied to exterior walls? Stucco Concrete Siding Flashing Quiz Review #6

32. 16. What is the part of the roof that extends out from the wall? Cornice Ridge Projection Flashing Quiz Review #6

33. 16. What is the part of the roof that extends out from the wall? Cornice Ridge Projection Flashing Quiz Review #6

34. 17. Which is included in the exterior elevations? Plumbing and electrical feature Finished floor and ceiling line Insulation and vapor barriers Piers and columns Quiz Review #6

35. 17. Which is included in the exterior elevations? Plumbing and electrical feature Finished floor and ceiling line Insulation and vapor barriers Piers and columns Quiz Review #6

36. 18. Attic ventilation is usually placed in the soffit and the: Fascia Gable Header Crawl space Quiz Review #6

37. 18. Attic ventilation is usually placed in the soffit and the: Fascia Gable Header Crawl space Quiz Review #6

38. 19. Grade line simply means: Crawl space Finished floor Ground Roofing material Quiz Review #6

39. 19. Grade line simply means: Crawl space Finished floor Ground Roofing material Quiz Review #6

40. 20. Define an elevation as: An exterior, flat view of a structure The height of the building above sea level The view cut through the building The building view from above Quiz Review #6

41. 20. Define an elevation as: An exterior, flat view of a structure The height of the building above sea level The view cut through the building The building view from above Quiz Review #6

42. 21. When drawing Exterior Elevations, the projection of the center lines for exterior doors, and windows are obtained from where? Roof plan Interior elevations Site development plan Floor plan Quiz Review #6

43. 21. When drawing Exterior Elevations, the projection of the center lines for exterior doors, and windows are obtained from where? Roof plan Interior elevations Site development plan Floor plan Quiz Review #6

44. 22. What is the preferred scale for drawing a front elevation? 1” = 1’-0” 81” = 1’-0” 83” = 1’-0” 14” = 1’-0” Quiz Review #6

45. 22. What is the preferred scale for drawing a front elevation? 1” = 1’-0” 81” = 1’-0” 83” = 1’-0” 14” = 1’-0” Quiz Review #6

46. 23. What features should be projected downward when drawing an elevation? Walls/offsets of building, doors, and windows Ceiling lines Grade Window details Quiz Review #6

47. 23. What features should be projected downward when drawing an elevation? Walls/offsets of building, doors, and windows Ceiling lines Grade Window details Quiz Review #6

48. 24. Which of the following would be noted on an exterior elevation? Ceiling line Ceiling joist direction Floor joist direction Room names Quiz Review #6

49. 24. Which of the following would be noted on an exterior elevation? Ceiling line Ceiling joist direction Floor joist direction Room names Quiz Review #6

50. 25. An exterior elevation is a/an: Plan view Orthographic view Perspective rendering Isometric drawing Quiz Review #6

51. 25. An exterior elevation is a/an: Plan view Orthographic view Perspective rendering Isometric drawing Quiz Review #6

52. 26. On what drawing is the amount of roof overhang noted? Floor plan Exterior elevation Foundation plan Overhang tables Quiz Review #6

53. 26. On what drawing is the amount of roof overhang noted? Floor plan Exterior elevation Foundation plan Overhang tables Quiz Review #6

54. 27. When dimensioning an elevation of a residence, which would be included? Horizontal measurements needed to locate doors and windows Room sizes Vertical distances between floors Width and depth measurements for chimneys Quiz Review #6

55. 27. When dimensioning an elevation of a residence, which would be included? Horizontal measurements needed to locate doors and windows Room sizes Vertical distances between floors Width and depth measurements for chimneys Quiz Review #6

56. 28. How would brick be best represented on an elevation drawing? Horizontal lines Vertical lines Diagonal lines Wavy lines Quiz Review #6

57. 28. How would brick be best represented on an elevation drawing? Horizontal lines Vertical lines Diagonal lines Wavy lines Quiz Review #6

58. 29. Exterior elevations typically include dimensions for: Vertical distances from floor to ceiling Horizontal distance between walls Vertical distances from eaves to ridge Nothing Quiz Review #6

59. 29. Exterior elevations typically include dimensions for: Vertical distances from floor to ceiling Horizontal distance between walls Vertical distances from eaves to ridge Nothing Quiz Review #6

60. 30. Where is the ridgeline of the roof located? Junction of siding and foundation Just above the window/door line Below the eave line The highest point on a house Quiz Review #6

61. 30. Where is the ridgeline of the roof located? Junction of siding and foundation Just above the window/door line Below the eave line The highest point on a house Quiz Review #6

62. 31. If the front elevation is labeled the South Elevation, then the right side elevation should be labeled as the: East elevation North elevation South elevation West elevation Quiz Review #6

63. 31. If the front elevation is labeled the South Elevation, then the right side elevation should be labeled as the: East elevation North elevation South elevation West elevation Quiz Review #6

64. 32. Exterior elevations showing the gable end will likely include a/an: Attic vent Casement window Note for roofing materials Pilaster Quiz Review #6

65. 32. Exterior elevations showing the gable end will likely include a/an: Attic vent Casement window Note for roofing materials Pilaster Quiz Review #6

66. 33. Which is used to represent horizontal siding on an elevation? Randomly spaced dots Equally spaced dots Randomly spaced diagonal lines No symbols are used Quiz Review #6

67. 33. Which is used to represent horizontal siding on an elevation? Randomly spaced dots Equally spaced dots Randomly spaced diagonal lines No symbols are used Quiz Review #6