1. Silver Medallion IRB Driver PUAEQU001B Prepare, maintain and test response equipment PUASAR014A Operate and maintain a small powercraft and motor for rescue operations

2. Housekeeping Course Timings & Breaks FacilitiesPhones/ PagersExitsAssembly Point

3. Course Overview Session times and locations Types of training – Theory – Dry practical – Wet practical Trainers Why become an IRB Driver?

4. Resources Powercraft Manual 7 th Ed Learner Guide Personal Protective Equipment

5. Course Outcomes By the end of this course you will be able to: Understand the roles and responsibilities of an IRB Driver Drive an IRB Perform rescues in an IRB as a Driver

6. Assessment Activities Task 1 – Log of training hours Task 2 – Written questioning Task 3 – Observation – Pre-and post-operational checks – IRB Capsize procedure – Motor re-start procedure Task 4 – Observation Rescues

7. Safety! Safety is the primary consideration in all IRB operations, poor driving can be the cause of injuries to the Driver, Crewperson and public The IRB is a high profile and expensive piece of equipment Be aware of your own limitations and those of your Crew Always follow the Powercraft Code of Conduct

8. What is the Role of an IRB Driver? The IRB Driver is responsible for overall operation of IRB and is responsible for the boat and crew and to the community and organisation An IRB Driver must always comply with the Powercaft Code of Conduct

9. Leading the IRB crewperson The Driver supervises the Crewperson in the pre and post operational maintenance of the IRB hull The Driver gives directions to the Crewperson while in the IRB The Driver needs to have good communication skills to give clear instructions and to listen to the Crew who will help identify hazards.

10. IRB Equipment and Storage Areas Types of IRB used in our service SLSA approved outboard motors and propellers Safety issues in the IRB area e.g. Manual handling Safe storage of fuel Reporting damaged equipment Accident/incident reporting

11. Crewperson Pre-operational Duties Inflating the hull to correct pressure Assisting the driver with fuelling Assisting the driver to place the motor onto the transom Ensuring that foot straps and handles are secure Checking ancillary equipment Completing log books Reporting damaged equipment Warming -up

12. Driver Pre-operational Duties Checking logbooks and preparing the motor Supervise and assist the Crewperson in the set-up and checks of the IRB hull Assembly of the fuel cell and motor onto the hull Set-up of radio communication equipment

13. Risk Assessment Before every practical training session in the water a risk assessment should be conducted to determine if it safe to operate an IRB today. it should consider: Surf and weather conditions The tide Space available for training Location of launch and landing site Seaweed or other debris in the water Number of trainers and candidates Skill level of the candidates

14. Post-operational Procedures Hose-down the IRB with fresh water Inspect the IRB for damage and record in the log book when not possible to repair Run the motor down for 3-5 minutes Hose the motor with fresh water While the motor is still running disconnect the fuel line and allow excess fuel to be used Refill the fuel cell Perform any necessary maintenance