Swing gate automation with articulated arm 391 24V DC Swing gate automation with articulated arm

SWING GATE AUTOMATION 391

SWING GATE AUTOMATION 391

SWING GATE AUTOMATION 391 DIMENSIONS 185x260x310mm

SWING GATE AUTOMATION 391

SWING GATE AUTOMATION 391

391 E 391 SWING GATE AUTOMATION 391 Low Voltage (24V DC) Electromechanical automation for swing gates with articulated arm and integrated electronic control board E 391 391 Low Voltage (24V DC) Electromechanical automation for swing gates with articulated arm NOTE: To operate the second leaf

Max. leaf width without electro-lock = 2,0 m SWING GATE AUTOMATION 391 General features Max. leaf width without electro-lock = 2,0 m Max. leaf width with electro-lock = 2,5 m Max. opening angle = 120° Adjustable integrated mechanical stops Main power supply = 230 / 115 Vac Motor power supply = 24Vdc Duty Cycle = Residential use (80 cycles/day) Max torque = 250 Nm Protection Class = IP44 Irreversible

Integrated control board E 391 - Features SWING GATE AUTOMATION 391 Integrated control board E 391 - Features Electronic control board with basic functions and easy to be programmed with 3 buttons and LED AP e EP LOGICS (stepped auto/semi-automatic) Electro-lock management Self Learning set-up cycle Speed selectable on 2 levels Anti wind function Electronic anti crushing safety (Directive EN12453-EN12445)

BUS technology for the connection of the “next generation” accessories

Project target To make installation easier (simplyfing wiring) To reduce installation time (reducing the number of connections)

Characteristics Accessories connection with 2x0,5mmq non polarized cables: power supply logical address Accessories: dip switches to set the function opening safety closing safety opening/closing safety open command Self-learning of the connected accessories (push button on the board)

“next generation” accessories: 1° step -> photocell XP 15 B Control board Photocells Flashing light Push button …… XP 15 B

At the moment available with Safebeam case XP 15 B Specifications: Self-aligning Max range 15m Adjustable support available At the moment available with Safebeam case NEW DESIGN IN MARCH 07

Integrated multi-code decoding

Project target Integrated decoding in all the new boards -> more competitiveness and installation simplification. Standardization of the decoding firmware –> easy choice of radio system

Characteristics INTEGRATED MULTI CODE DECODING: DS (dip-switch), LC (Rolling Code) e SLH (self learning hopping code) TWO CHANNEL DECODING SYSTEM PLUG FOR FREQUENCY MODULE XF 868 – XF 433

SWING GATE AUTOMATION 391 XF 433 RECEIVER XF 868 RECEIVER

SWING GATE AUTOMATION 391 Battery backup unit XBAT 24 In case of power failure, it ensures operations. XBAT 24 consists in a plastic housing with 20 batteries 1,2V NiMh and charging board inside. Installation inside the operator. AVAILABILITY MARCH 07

SWING GATE AUTOMATION 391 AVAILABILITY JUNE 07 KEY PUSH-BUTTON WITH RELEASE SYSTEM (ARMOURED) AVAILABILITY JUNE 07