A valve must be used to control water flow from ablution hose. Sample drawing for 6270 WC pan. ABLUTION HOSE APPLICATIONS

Standard application Concealed application (water connection visible) (water connection inside the wall) ABLUTION HOSE APPLICATIONS

STANDARD ABLUTION HOSE APPLICATION Valve to control water flow Flexible hose is visible

Flexible hose will be inserted through hole on the side of the WC pan. STANDARD CONNECTION (CONNECTION FROM THE SIDE)

Flexible hose will be connected to the valve on the wall. STANDARD CONNECTION (CONNECTION FROM THE SIDE)

Flexible hose will be left on the back of WC pan, not passed thru the hole on the side. Flexible hose will be connected to the valve from the back of WC pan as concealed. The connection between valve and WC will be inside the wall and not visible like shown in the next slide. CONCEALED CONNECTION (CONNECTION FROM THE BACK)

CONCEALED ABLUTION HOSE APPLICATION Valve to control water flow Connection pipe is invisible, inside the wall

All these pieces are pre-installed in the factory to the WC. After preparing the pipe work, inlet water is connected to the ablution pipe via threaded end and it is ready to use.

Ablution hose in up segment

Ablution hose in mid / mid-low segment