2. Hold the thread on the spool with your right hand. With your left hand, pull the thread to your left past the spindle. Keep the thread towards the front of the machine.

3. Bring the thread in front of the black spindle. Then pull the thread behind the metal spindle.

4. Hold the thread so it can’t move. Then pull the thread with your right hand to slide it under the disk.

5. You will notice your bobbin has a hole in each side. Put your thread through the top hole from the center up.

6. Hold the thread with your right hand and place the bobbin on the bobbin spindle. Push the bobbin spindle to the right.

7. You will now need to switch hands and hold the thread with your left hand. With your right hand pull out on the inside knob on the handwheel.

8. While holding the thread coming through the top of the bobbin, press the foot pedal to wind thread on the bobbin for a few seconds. Stop and clip the thread coming out the top of the bobbin, then continue to finish winding the bobbin.

9. Your bobbin should now be ready to place in your machine. Watch the tutorial for threading your machine. Happy Sewing!