CIMON TOUCH

KDT SYSTEMS Introduction  Excellent Durability  The mobile CPU of the TOUCH gives excellent durability under industrial environment.  Fanless cooling system make the TOUCH more durable.  Various I/O Channels  Ethernet Ports  Serial Ports  Parallel Port  USB Ports  VGA Port  Keyboard/Mouse Port

KDT SYSTEMS Introduction  CIMON HMI included  The CIMON TOUCH includes The CIMON HMI/SCADA  If you choose a CIMON TOUCH for your SCADA system, you can reduce cost, CIMON-HMI S/W 내장 Touch Panel Computer

KDT SYSTEMS Introduction  Interconnection  The CIMON TOUCH can connect with upper system (i.e. DBMS or SCADA)  The CIMON TOUCH can communicate with various field controllers.

KDT SYSTEMS Introduction  Useful Applications  Line/Facility monitoring  Roll of Cell PC: gather data and store it  You can install any software you want

KDT SYSTEMS Specification TOUCHT12CST12CHT15CST15CHT15CX T15CP CPUVIA Eden ESP GHz RAMDDR-SDRAM 512MB PC3200 DDR400 Graphic ChipUniChrome Pro IGP integrated in VIA CN400 VT8625 Display 12.1" TFT LCD15" TFT LCD CRT output (15P DSUB) CRT output (15P DSUB) Touch Panel 12.1 " 5Wire Resistive 15" 5Wire Resistive

KDT SYSTEMS Specification TOUCHT12CST12CHT15CST15CHT15CX T15CP Storage CF 2GB HDD 40GB CF 2GB HDD 40GB PS/2Keyboard / Mouse USBUSB 2.0 x 4 Audio PortAudio Out x 1 Power100 ~ 240 VAC

KDT SYSTEMS Specification TOUCHT12CST12CHT15CST15CHT15CXT15CP Ethernet10 BASE-T/100 BASE-TX x 1 10BaseT/100BaseTX x 2 Serial Port RS-232/422/485 x 1 RS-232 x 1RS-232 x 3 Parallel PortNoYes CD-ROMNoYes PCI SlotNoYes

KDT SYSTEMS Hardware: CPU  CPU: VIA Eden ESP  Speed: 1.0 GHz  FSB: 133 MHz  The maximum power requirement of CPU is 7W. This CPU is fit to fanless system.

KDT SYSTEMS Hardware: Memory  North Bridge: VIA CN400  Capacity: 512 MB (up to 1GB)  Type: DDR-SDRAM PC3200 DDR 400MHz  The maximum data transfer rate is 3,200MB/sec. A Hi-speed memory make all software more faster.

KDT SYSTEMS Hardware: Graphic  UniChrome Pro IGP integrated in VIA CN400 VT8625  Graphic Memory: 32 MB shared  It’s powerful graphic performance make the CIMON TOUCH play two MPEG4 video files at a time.

KDT SYSTEMS Hardware: LCD Panel  TFT LCD Panel from LG.Philips LCD  Resolution: 1,024 x RGB x 768  Number of Colors: 16.2M (15”)  Number of Colors: 262,144 (12.1”)

KDT SYSTEMS Hardware: Touch Panel  5 wire resistive type touch panel  High Optical Transmittance: 80%  Durability  Surface Scratching: 1million times (250gf,60mm/s)  Surface Pitting: 35,000,000times(250gf, 2times/s)  A USB touch panel controller is included.

KDT SYSTEMS Hardware: Storage  CF: 2GB  (T12CS, T15CS)  HDD: 40GB  (T12CH, T15CH, T15CX, T15CP)  A anti-shock HDD bracket protects HDD from mechanical vibration and shock.

KDT SYSTEMS Hardware: VGA Port  One VGA Port to connect with a CRT.  If you connect with a CRT, CRT displays a image same as LCD.  If you extend your desktop using Windows desktop extension function, CRT displays a part of extended desktop view.

KDT SYSTEMS Hardware: USB  Four USB 2.0 ports are include.  You can connect and access USB mass storages.  The CIMON TOUCH can boot from USB- DRIVE, USB-CD, USB-FDD, USB-HDD  Various external storages can be used.

KDT SYSTEMS Hardware: Ethernet  10 BaseT / 100 BaseTX  You can choose T15CX or T15CP to use two channels of Ethernet.

KDT SYSTEMS Hardware: Ethernet  If you choose T15CX or T15CP which has two channels of Ethernet, you can separate a network for computer systems and a network for field controller to distribute and reduce network data traffic.

KDT SYSTEMS Hardware: Serial Port  One RS-232/422/485 Convertible Port.  One more RS-232 Port  T12CS, T12CH, T15CS, T15CH  Three more RS-232 Ports  T15CX, T15CP

KDT SYSTEMS Hardware: RS-232/422/485  You can select one of RS-232/422/485 using function select switch.  It is easy to cable to plug type 5P connector for RS-422/485 communication.

KDT SYSTEMS Hardware: RS-485  RS-485 auto toggle function is supported.  You can select the delay time after transmitting last data to closing channel in three step using DIP switch.  You can connect or disconnect internal termination resister using DIP switch.

KDT SYSTEMS Hardware: T15CX & T15CP  Parallel Port 1CH: T15CX, T15CP  If you want to use parallel port to connect a printer, you must choose T15CX or T15CP.  One of SPP/Bi-Directional, EPP/SPP, ECP, ECP/EPP can be selected.  CD-ROM: T15CP  If you want to use CD-ROM, you must choose T15CP  One PCI slot: T15CP  If you want to use PCI card, you must choose T15CP

KDT SYSTEMS HMI for TOUCH  The CIMON TOUCH include the CIMON HMI for TOUCH only.  This type of HMI works properly only in the CIMON TOUCH  If you install and run it, HMI run in demo mode.  Users must install HMI for TOUCH to CIMON TOUCH.

KDT SYSTEMS OS: Windows XP Embedded  Windows XP Embedded (XPE) is a kind of Microsoft Windows XP Professional for embedded systems.  Components of XPE are identical with those of XP Professional.  XPE has EWF to protect disk volume.

KDT SYSTEMS OS: EWF  EWF is a powerful function to protect disk volume supplied by XPE.  EWF is more reliable than such a solution of third party.  EWF commit help you to use EWF function.

KDT SYSTEMS OS: EWF  When you will setup Windows, install programs or write files on C: volume, new data will be stored in EWF volume not in C: volume.  If you will restart TOUCH/PPC, old data will be restored in C: volume.  If you want to save new data, you must run EWF commit. Then the TOUCH/PPC will be restart and new data will be saved.

KDT SYSTEMS OS: EWF  After installing program, run EWF commit without reboot. If you don’t, installed program will be removed.  After change Windows configuration, run EWF commit. If you don’t, changed configuration will be removed.  After creating new files or folders, run EWF commit. If you don’t, new files or folders will be removed.

KDT SYSTEMS Reliability  Operation Temperature: 0~50 ℃  High temperature test: CPU usage 100%, 60 ℃, 24hours  Low temperature test: Start at -10 ℃  EWF function test  ON/OFF test: 10,000 time without file system fail  Anti shock HDD bracket  Start after dropping 1m height, each 5 direction, 10 times