FlexMove 9.8 FC SERIES FC FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required:

Slides:

Advertisements

Similar presentations

FlexMove FB SERIES 9.8 FBSB-40x40 UOM : 3 meter / length Support Beam 40x40 – Aluminium Anodized FBSB-64x64 Support Beam 64x64 – Aluminium Anodized FBSB-64x64C.

Advertisements

FRC Robot Mechanical Principles

Statics Worksheet Solutions

BARTOSZEK ENGINEERING 1 The Design of the Booster Collimators Larry Bartoszek BARTOSZEK ENGINEERING 3/10/03.

HFA 2220 Series Incline Conveyor The 2220 Incline Conveyor features a a low profile yet extremely rigid anodized extruded aluminum frame ● angle adjustment.

FlexMove FA SERIES 9.8 FAHBS-40 FAHBS-60 FAHBS-80 FA For 40mm horizontal crossing support beam UOM : pc For 64mm horizontal crossing support beam UOM :

Sheet-Metal Forming.

Important aspects to improve conveyor performance

Bucket elevators Basic types Pitched bucket elevator

Torque Torque and golden rule of mechanics Definition of torque r F

MultiRail Horizontal Anchorage Device

Remaining lectures Last lecture by Dr. Darpe: Wed, 3 rd Oct Lectures by Prof S R Kale 22 st Oct (Mon) 24 th Oct (Wed) and 31 st Oct (Wed) 11am – 11:55am.

Course Name : DESIGN OF MACHINE ELEMENTS

1. How is torque calculated?. Torque = Force X length of torque arm T = F x l.

MICE Collaboration Meeting at Frascati, Jun 26~29, 2005 Iron Shield Mounting Design Stephanie Yang.

Screws, Fasteners, and the Design of Nonpermanent Joints

By: Joseph Martinez University of Michigan Supervisor: Dave Pushka, NuMI Project 3Q120-M Quadrupole Magnet Transport.

>80>80>90>70>70>60>60>50>50>29>40>40 Average 66.4 Median 69 High 96 Low 29.

POWER TRANSMISSION with BELTS & CHAINS

4.5 REINFORCED EARTH (terre armee) FILLS CAN BE FORMED PLACING "REINFORCEMENTS" IN THEM AND COMPACTING (GLASS FIBRE REINFORCED, PLASTIC FIBRE, TRYLENE.

T082 Q1. A uniform horizontal beam of length 6

>78>63>42 >33 Average 57.2 Median 58.5 Highest 98 Lowest 18.

Pacific school of engineering

Rolling element bearings A. Lozzi 09

PROFACT AUTOMATION SOLUTIONS. CONVEYOR SYSTEM PRODUCTS We deals in Conveying System in which we have a brand Flexkon covers following the following sectors.

Bridge Modules BKK and BKR

Automation Simplified conveyor system It is a system of mechanical handling equipment that moves materials from one location to.

Presentation Pasteruizer Chain for Glass Bottles.

Majorana collaboration meeting, Seattle, Aug.7 - Aug. 9 Béla MajorovitsGERDA detector mounting 1 GERDA Detector Mounting The Detector Holders Detector.

Problem-1 A section of commercial steel shafting 2.0 m long between bearings carries a 1000 N pulley at its midpoint, as shown in Figure. The pulley is.

FlexMove 9.8 FL SERIES FL FL Series Characteristic Beam Width: 150mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required:

Belt Drives and Chain Drives

Conservation of Energy. Machines.. Conservation of Energy Energy: the ability to do work. The Law of Conservation of Energy: Energy cannot be created.

The Magnetic Field The force on a charge q moving with a velocity The magnitude of the force.

9.8 FK SERIES FK Series Characteristic Beam Width: 45mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required: FASR-25K OR.

Radial Ball Bearing Product Overview

Moment Connection Requires Bolts Outside the Flanges

The force on a charge q moving with a velocity The magnitude of the force.

BullBot is bull robot that can have bull fight with techniques of butting or lifting. Learn how bull fight, Korean traditional game, had started and kinds.

FlexMove FS 9.8 FS SERIES Variety of chain types suitable for wide range of applications either horizontal or vertically product transportation. The maximum.

Machine Design - II ME 441 Lecture 6-2: Flexible Mechanical Elements Belts, Ropes and Chains Chapter 17 Dr. Mohammad A. Irfan Oct 12, Zul Hajj.

1 158 Kč 878 Kč 1 FlexMove <70 ks <4 ks

Chapter 8 Review. 1. How is torque calculated? T = F x l.

Aerodynamic forces on the blade, COP, Optimum blade profiles

Garage Door Design Analysis

Multi-Angle Photos to help you build.

FABRICATION OF GRAVITY CONVEYOR Presented by Pankaj Paithankar

STABILIZER SYSTEM Sponsor: Dr. Peyman Honarmandi SLAP Tech Andre Kerr, Pinhao Liang, Gabriel Pena, Shripal Shah 1.

ROLLING Rolling is a process of reduction of the cross-sectional area or shaping a metal piece through the deformation caused by a pair of metal rolls.

H, I & PLUS BEAM FABRICATION LINE WITH MATERIAL HANDLING

Important aspects to improve conveyor performance

Flat-and Round-Belt Drives

Automatic Door System Sliding Operator SD-60A2 Specification 1.

BEAM TRANSFER CHANNELS, INJECTION AND EXTRACTION SYSTEMS

Chapter 4 Mechanisms.

conventional rear wheel drive, a beam axle assembly

Clamping & Braking Elements - pneumatically

Present status of the flux return yoke design

V Belt & Rope Drive Problems

POWER TRANSMISSION with BELTS & CHAINS

Remaining lectures Last lecture by Dr. Darpe: Wed, 3rd Oct

ELECTRIC TRACTION SYSTEM

Automated Capping System

Two-Gear Gear Trains Using different size gear allows change in speed

Motion STARTER Parts list Quick task: Discuss in pairs all the parts shown. Agree the function each of these parts for the Tumbler motion, and write your.

Reaction Forces and Moments

Stainless Steel MatTop chain Fortrex 9200

Presentation Pasteruizer Chain for Glass Bottles

LIFT,ESCALATOR AND MOVING WALKS

Presentation transcript:

FlexMove 9.8 FC SERIES FC FC Series Characteristic Beam Width: 105mm Product Width: Refer to Guide Rail Assembly Accessories Needed Slide Rail Required: FASR-25 OR FASR-25U Slide Rail Colour: WHITE OR NATURAL COLOUR Slide Rail Material: HDPE OR UHMW Slide Rail Rivet & Screw: FASLR-4X6 or FASLS-M5 Connecting strip is used to connect 2 beams. Connecting Strip: FACS-25x140A Variety of chain type suitable for wide range of applications either horizontal or vertically product transportation. Capacity higher than FK, FS, FM. The maximum product width to be conveyed can be referred to guide rail assembly pages. Conveyor Beam FCCB-3 UOM: pc Chain Connecting Module FCCC-160 UOM : 3 Meter / Length 7-1 FlexMove reserves the right to make alteration without prior notification Every care has been taken to ensure the accuracy of the information contained in this catalogue but no liability can be accepted for any error or omissions Kč <30 ks 898 Kč <4 ks

FlexMove UOM: 5 Meter / box Application: Suitable for horizontal and slope < 5° transport of products with accumulation. Standard Plain Chain FCPC-5 UOM: 5 Meter / box Application: Suitable for transport of static sensitive product.. Conductive Chain FCCD-5 Friction Top Chain FCFT-5 UOM: 5 Meter / box Application: Suitable for vertical transport of product with no accumulation. Cleat Top Chain FCCT-5A17-L# UOM: 5 Meter / box Application: Suitable for vertical transport of product with no accumulation. Cleat Top Chain FCCT-5A30-L# FC SERIES FC Chain Common Data Packaging: 5m per box Pitch: 35.5mm Width: 105mm Tensile Strength at 20°C: 6000N Colour: White & Black (Conductive) Material :- Chain: White Acetal / POM Pivot: Polyamide Pivot Pin : Stainless Steel Insert (Wedge and Friction): TPE Grey Example for FCCT-5A17-L# # = 1 cleated top chain with alternate of # link of plain chain The above chain is FCCT-5A17-L1, 1 link cleated top chain with alternate of 1 link of plain chain. Note: # = 1, 2, 3, 4, 5…..20 UOM: 5 Meter / box Application: Suitable for transport product in slope > 5 ° but <= 30 ° without accumulation. # = 1, 2, 3, 4, 5… Kč <20 bal Kč <5 bal

FlexMove UOM: 5 Meter / box Application: Suitable for accumulation of product with low friction and pressure. Roller Top Chain FCRT-5Roller Cleat Chain FCRC-5A-L# UOM: 5 Meter / box Application: Suitable for conveying of ferromagnetic products in slope. Magnet Top Chain FCMT-5 UOM: 5 Meter / box Application: Suitable for conveying of ferromagnetic products in slope. Magnet Top Chain FCMT-5-L# Roller Cleat Chain FCRC-5B-L# FC SERIES FC UOM: 5 Meter / box Application: Suitable for vertical transportation of product in slope with no accumulation. UOM: 5 Meter / box Application: Suitable for vertical transportation of product in slope with no accumulation. # = 1, 2, 3, 4,

FlexMove FC Direct End Drive with Motor (LEFT) FCDD-0.25L, 0.37L, 0.55L FC Direct End Drive with Motor (RIGHT) FCDD-0.25R, 0.37R, 0.55R FC SERIES FC UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter The Direct End Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCDD-0L represents direct drive without gear motor. Multi channel drives are available upon request. The Direct End Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCDD-0R represents direct drive without gear motor. Multi channel drives are available upon request. FC Direct End Drive without Motor (RIGHT) FCDD-0R FC Direct End Drive without Motor (LEFT) FCDD-0L SEW gear motors are products of SEW Eurodrive Max Traction Force : 1250N Kč <2 ks Kč <2 ks

FlexMove FC Suspended End Drive with Motor (LEFT) FCSD-0.25L, 0.37L, 0.55L FC Suspended End Drive with Motor (RIGHT) FCSD-0.25R, 0.37R, 0.55R FC SERIES FC UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter The Suspended End Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCSD-0L represents suspended drive without gear motor. The Suspended End Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCSD-0R represents direct drive without gear motor. FC Suspended End Drive without Motor (RIGHT) FCSD-0R FC Suspended End Drive without Motor (LEFT) FCSD-0L SEW gear motors are products of SEW Eurodrive Max Traction Force : 1250N

FlexMove FC Direct Intermediate Drive with Motor (LEFT) FCID-DD-0.25L, 0.37L, 0.55L FC Direct Intermediate Drive with Motor (RIGHT) FCID-DD-0.25R, 0.37R, 0.55R FC SERIES FC UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter The Direct Intermediate Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCID-DD-0L represents direct drive without gear motor. Maximum traction force for FCID- DD is lower than FCDD and FCSD. FC Direct Intermediate Drive without Motor (RIGHT) FCID-DD-OR FC Direct Intermediate Drive without Motor (LEFT) FCID-DD-0L SEW gear motors are products of SEW Eurodrive Max Traction Force : 200N The Direct Intermediate Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCID-DD-0L represents direct drive without gear motor. Maximum traction force for FCID- DD is lower than FCDD and FCSD.

FlexMove FC Suspended Intermediate Drive with Motor (LEFT) FCID-SD-0.25L, 0.37L, 0.55L FC SERIES FC UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter The Suspended Intermediate Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCID-SD-0L represents suspended drive without gear motor. Maximum traction force for FCID-SD is lower than FCDD and FCSD. The Suspended Intermediate Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCID-SD-0R represents suspended drive without gear motor. Maximum traction force for FCID-SD is lower than FCDD and FCSD. FC Suspended Intermediate Drive without Motor (RIGHT) FCID-SD-0R FC Suspended Intermediate Drive without Motor (LEFT) FCID-SD-0L FC Suspended Intermediate Drive with Motor (RIGHT) FCID-SD-0.25R, 0.37R, 0.55R SEW gear motors are products of SEW Eurodrive. 7-7 Max Traction Force : 200N

FlexMove FC Suspended Catenary Drive with Motor (LEFT) FCCD-SD-0.25L, 0.37L, 0.55L FC Suspended Catenary Drive with Motor (RIGHT) FCCD-SD-0.25R, 0.37R, 0.55R FC SERIES FC UOM : pc Chain required 1-way : 1.4 meter Slide rail required 1-way: 1.0 meter UOM : pc Chain required 1-way : 1.4 meter Slide rail required 1-way: 1.0 meter The Suspended Catenary Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCCD-SD-0L represents suspended drive without gear motor. The Suspended Catenary Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCCD-SD-0R represents suspended drive without gear motor. FC Suspended Catenary Drive without Motor (RIGHT) FCID-SD-0R FC Suspended Catenary Drive without Motor (LEFT) FCID-SD-0L SEW gear motors are products of SEW Eurodrive Max Traction Force : 1250N

FlexMove FC SERIES FC Direct Wheel Drive with Motor FCWD-0.25, 0.37, 0.55 FC Suspended Wheel Drive with Motor FCWD-SD-0.25, 0.37, 0.55 UOM : SET Chain required 1-way : 0.7 meter Slide rail required 1-way: 0.7 meter UOM : SET Chain required 1-way : 0.7 meter Slide rail required 1-way: 0.7 meter FC The Direct Wheel Drive Unit is without torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCWD-DD represents wheel drive without gear motor. Maximum traction force for FCWD-DD is lower than FCDD and FCSD. FC Suspended Wheel Drive without Motor FCWD-SD-0M FC Direct Wheel Drive without Motor FCWD-DD-0M The Suspended Wheel Drive Unit is with torque limiter. Standard attached gear motors are with SEW motor size 0.25kW, 0.37kW & 0.55kW. FCWD-SD represents wheel drive without motor. Maximum traction force for FCWD-SD is lower than FCDD and FCSD. SEW gear motors are products of SEW Eurodrive Max Traction Force : 200N

FlexMove FC SERIES FC UOM : pc Chain required 2-way : 0.7 meter Slide rail required 2-way: 0 UOM : pc Chain required 2-way : 0.8 meter Slide rail required 2-way: 0.5 meter UOM : pc Chain required 2-way : 1.6 meter Slide rail required 2-way: 0 FC Idler End-325 FCIE-325 FC Idler End-308 FCIE-308 FC Idler Bend FCIB Kč <4 ks

FlexMove 9.8 FC End Transfer Bridge c/w Roller for Drive Unit FCTB-DRR FC End Transfer Bridge w/o Roller for Drive Unit FCTB-DR FC End Transfer Bridge c/w Roller for Idler Unit FCTB-IER FC End Transfer Bridge w/o Roller for Idler Unit FCTB-IE FC SERIES FC Kč <4 ks Kč <4 ks

FlexMove FC Wheel Bend 180° FCWB-180R170A FC Wheel Bend 90° FCWB-90R170A FC Wheel Bend 60° FCWB-60R170A FC SERIES FC UOM : pc Chain required 2-way : 1.4 meter Slide rail required 2-way: 2.8 meter UOM : pc Chain required 2-way : 0.9 meter Slide rail required 2-way: 1.7 meter UOM : pc Chain required 2-way : 0.7 meter Slide rail required 2-way: 1.4 meter Kč <2 ks Kč <2 ks Kč <2 ks

FC Wheel Bend 45° FCWB-45R170A FC Wheel Bend 30° FCWB-30R170A FC Wheel Bend 5° - 180° FC SERIES FC UOM : pc Chain required 2-way : 0.6 meter Slide rail required 2-way: 1.2 meter UOM : pc Chain required 2-way : 0.5 meter Slide rail required 2-way: 1.0 meter Example for FC Wheel Bend Ordering Wheel bend, Ɵ ° ± 1° FCWB- Ɵ °R170A If an angle of 65° is needed for wheel bend, so the ordering part number is FCWB-65R170A The outer bend is assembled using connecting strip (FACS-25x140A). Angle of Ɵ ° must be indicated when ordering Kč <2 ks Kč <2 ks

FlexMove FC Horizontal Plain Bend 15° FC Horizontal Plain Bend 30° FC Horizontal Plain Bend 45° FC SERIES FC UOM : pc Chain required 2-way (300, 500, 700, 1000) : 1, 1.1, 1.2, 1.4 meter Slide rail required 2-way(300, 500, 700, 1000): 2, 2.2, 2.4, 2.8 meter Horizontal plain bend, 15° ± 1° R = 300 ± 10mm FCHB-15R300 R = 500 ± 10mm FCHB-15R500 R = 700 ± 10mm FCHB-15R700 R = 1000 ± 10mm FCHB-15R1000 Horizontal plain bend, 30° ± 1° R = 300 ± 10mm FCHB-30R300 R = 500 ± 10mm FCHB-30R500 R = 700 ± 10mm FCHB-30R700 R = 1000 ± 10mm FCHB-30R1000 UOM : pc Chain required 2-way (300, 500, 700, 1000) : 1.2, 1.4, 1.6, 1.9 meter Slide rail required 2-way(300, 500, 700, 1000): 2.4, 2.8, 3.2, 3.8 meter Horizontal plain bend, 45° ± 1° R = 300 ± 10mm FCHB-45R300 R = 500 ± 10mm FCHB-45R500 R = 700 ± 10mm FCHB-45R700 R = 1000 ± 10mm FCHB-45R1000 UOM : pc Chain required 2-way (300, 500, 700, 1000) : 1.3, 1.6, 1.9, 2.4 meter Slide rail required 2-way(300, 500, 700, 1000): 2.5, 2.9, 3.3, 3.9 meter FCHB-15R Kč <2 ks FCHB-30R Kč <2 ks FCHB-45R Kč <2 ks

FC Horizontal Plain Bend 60° FC Horizontal Plain Bend 90° FC SERIES FC Horizontal plain bend, 90° ± 1° R = 300 ± 10mm FCHB-90R300 R = 500 ± 10mm FCHB-90R500 R = 700 ± 10mm FCHB-90R700 R = 1000 ± 10mm FCHB-90R1000 UOM : pc Chain required 2-way (300, 500, 700, 1000) : 1.8, 2.4, 3.0, 4.0 meter Slide rail required 2-way(300, 500, 700, 1000): 3.5, 4.8, 6.0, 8.0 meter Horizontal plain bend, 60° ± 1° R = 300 ± 10mm FCHB-60R300 R = 500 ± 10mm FCHB-60R500 R = 700 ± 10mm FCHB-60R700 R = 1000 ± 10mm FCHB-60R1000 UOM : pc Chain required 2-way (300, 500, 700, 1000) : 1.5, 1.9, 2.3, 2.9 meter Slide rail required 2-way(300, 500, 700, 1000): 2.9, 3.7, 4.6, 5.8 meter FCHB-60R Kč <2 ks FCHB-90R Kč <2 ks FCHB-90R Kč <2 ks

FlexMove FC Horizontal Plain Bend 180° FC Horizontal Plain Bend 5° - 180° FC SERIES FC Horizontal plain bend, 180° ± 1° R = 300 ± 10mm FCHB-180R300 R = 500 ± 10mm FCHB-180R500 R = 700 ± 10mm FCHB-180R700 R = 1000 ± 10mm FCHB-180R1000 Example for FC Horizontal Plain Bend Ordering Horizontal plain bend, Ɵ ° ± 1° R = 300 ± 10mm FCHB- Ɵ °R300 R = 500 ± 10mm FCHB- Ɵ °R500 R = 700 ± 10mm FCHB- Ɵ °R700 R = 1000 ± 10mm FCHB- Ɵ °R1000 If an angle of 120° is needed for radius R500 horizontal plain bend, so the ordering part number is FCHB-120R500 UOM : pc Chain required 2-way (300, 500, 700, 1000) : meter (variable to angle) Slide rail required 2-way(300, 500, 700, 1000): meter (variable to angle) UOM : pc Chain required 2-way (300, 500, 700, 1000) : 2.7, 4.0, 5.2, 7.1 meter Slide rail required 2-way(300, 500, 700, 1000): 5.4, 7.9, 1.1, 14.2 meter

FlexMove FC Vertical Bend 5° FCVB-5R400 FC Vertical Bend 10° FCVB-10R400 FC Vertical Bend 15° FCVB-15R400 FC SERIES FC UOM: SET Chain required 2-way: 0.5 meter Slide rail required 2-way: 1.0 meter UOM: pc Chain required 2-way: 0.4 meter Slide rail required 2-way: 0.8 meter UOM: SET Chain required 2-way: 0.6 meter Slide rail required 2-way: 1.1 meter Kč <2 ks Kč <2 ks Kč <2 ks FCVB-7R Kč <2 ks

FlexMove FC Vertical Bend 20° FCVB-20R400 FC Vertical Bend 30° FCVB-30R400 FC Vertical Bend 45° FCVB-45R00 FC SERIES FC UOM: SET Chain required 2-way: 0.8 meter Slide rail required 2-way: 1.5 meter UOM: pc Chain required 2-way: 0.6 meter Slide rail required 2-way: 1.2 meter UOM: SET Chain required 2-way: 1.0 meter Slide rail required 2-way: 1.9 meter FVCB 25R Kč <2 ks

FlexMove FC Vertical Bend 60° FCVB-60R400 FC SERIES FC UOM: SET Chain required 2-way: 1.2 meter Slide rail required 2-way: 2.4 meter UOM: SET Chain required 2-way: 1.6 meter Slide rail required 2-way: 3.2 meter FC Vertical Bend 90° FCVB-90R

FlexMove FC SERIES FC Example for FC Vertical Bend Ordering Vertical bend, Ɵ ° ± 1° FCVB- Ɵ °R400 If an angle of 65° is needed for vertical bend, so the ordering part number is FCVB-65R FC Vertical 5° - 90° The outer bend is assembled using connecting strip (FACS-25x140A). Angle of “ Ɵ °” must be indicated when ordering.