1. www.fall-protection.com MultiRail Horizontal Anchorage Device www.fall-protection.com

2. Anchorage Devices  Söll MultiRail is a fixed horizontal anchorage device, which functions/works on a rail basis, designed and tested to DIN EN 795 - Class D.  Söll MultiRail rail systems can be installed along the entire unprotected work area and offers higher safety.  Söll MultiRail rail systems can be installed along the entire unprotected work area and offers higher safety.  It offers the advantage of greater fixing distances (up to 6 m) and can be used by more people at the same time (up to 6).  Only few components are necessary.  The gliders slide smoothly on the rail following the user.

3. www.fall-protection.com  Storefronts  Flat roofs or steep roofs  Working platforms on masts and buildings  Hangars  Shipyards, cranes etc.  Industrial plants  Loading stations  Wastewater/sewage plants  Adventureparcs  The most common applications of MultiRail are:

4. www.fall-protection.com System Components  MultiRail  Made of pickled stainless steel, available in fixed lengths of 6 m. Also curved, with radius > 2000 mm for rail mounted in either upwards or sidewards orientations.  Connector  Coupling part made of anodized Aluminium, to connect individual rail sections.

5. www.fall-protection.com System Components  End-stop  Made of pickled stainless steel and anodised Aluminium. It serves as an end anchorage to prevent the glider from running out unintentionally.  End-stop with exit  Made of pickled stainless steel and anodised Aluminium. Serves as an end anchorage and can be opened to remove the glider.

6. www.fall-protection.com System Components  Supports  Available in several types.  Made of pickled stainless steel with Teflon inserts.  The rail glides smoothly in the brackets and is not subject to any constraint.

7. www.fall-protection.com System Components  Corners - upwards & sidewards  Made of anodised Aluminium, these components allow MultiRail to follow the profile of the building. The radius is 80 mm with a standard angle of 90°.  Other angles between 30° and 150° are available on request.  Horizontal Track Change  The T-Junction allows several rail systems to be connected and used seamlessly. This function is available exclusively on the MultiRail system.

8. www.fall-protection.com The Closed Glider  It is the most convenient solution, it can be removed from the system at the end-stop with exit sections or remain permanently on the rail.  For use where there are only a small number of MultiRail systems and where the systems have defined entry and exit points.  Made of pickled stainless steel with polyamide inlays, it is also fitted with a stainless steel connector. As wheels are not necessary, it is dirt-resistant as well as very light, only 400 g.

9. www.fall-protection.com The Openable Glider  For use where there are several MultiRail systems or where the systems do not have defined entry and exit points.  Made of pickled stainless steel with polyamide inlays, it is also fitted with a stainless steel connector.  By means of an easy to use opening and closing mechanism, it can be removed or attached anywhere along the rail offering more flexibility to the user during his work. Also it is very light, just 600 g.

10. www.fall-protection.com

11. The new Wheeled Runner  Made from pickled stainless steel with 4 load-bearing wheels and a swivelling stainless steel eye.  This runner may only be used for overhead applications. The runner can now pass horizontal curves.  It can be used with a retractable type fall arrester, increasing the size of the protected work area.  For use where the user works beneath the MultiRail System at varying heights.

12. www.fall-protection.com Approval  The Söll-MultiRail-System has been tested and approved by an independent institute (0158).  The Söll-MultiRail-System complies with the requirements of CE norm EN795 Class D (certified).

13. www.fall-protection.com Easy to handle System  The gliders slide smoothly on the rail following the user  Available with/in 3 different gliders  To be assembled at foot level on a wall or overhead  Only few components are necessary  The closed profile makes the product more resistant against the accumulation of dirt

14. www.fall-protection.com Easy to install  Big fixing distances up to 6 m reduce the assembling work  The rail is not fixed into mounting brackets, herewith, thermal expansion is compensated for  The use of the low friction mounting brackets means that in the event of a fall the absolute minimum impact will be transmitted to the structure  Horizontal and vertical installation of the rail enables a greater variety of applications  Pre-constructed corner sections allow the system to be easily customized to a structure  The standard length of the rail is of 6m, this enables a quick assembling and cost saving, as few connecting parts are needed  Bended rails with a radius of > 2000 mm are also available

15. www.fall-protection.com Robust  Can be used by up to 6 persons at the same time  The rail can absorb forces up to 100 kg without permanent deformation  Made of stainless steel for the toughest environmental conditions  The energy caused by the fall is absorbed by the bending of the rail, thereby the structure remains protected

16. www.fall-protection.com SPERIAN FALL PROTECTION Deutschland GmbH & Co. KG Seligenweg 10, D-95028 Hof Tel.: +49 9281 8302 0 Fax.: +49 9281 3626 soell@sperianprotection.comwww.multirail.eu MultiRail