Paul van Exel, Director USPI Standards association Oil, Gas, Process & Power Industry Paul van Exel, Director USPI Standards association Oil, Gas, Process.

Slides:

Advertisements

Similar presentations

STEP and related approaches to Long Term Knowledge Retention Mike Pratt, LMR Systems, UK Atlantic Workshop on Long Term Knowledge Retention Bath, UK 12.

Advertisements

ISO Implementation and Processor Validation Keith Hunten, P.E. Lockheed Martin Aeronautics April, 2002 ESA-NASA Workshop

Advanced Manufacturing Laboratory Department of Industrial Engineering Sharif University of Technology Session # 11.

FASTAHEAD Project- Implementation of Key Activities Modules of MSc (Advanced Design & Manufacture)- 13 Modules Developed 1.Design management and prediction;

1 1 CEN/ISSS workshop Cantù, 2003 – Luciano Lauro CEN/ISSS workshop Advantages for the Italian furniture industry on the “funStep” model.

The Worldwide Graphic Language for Design

Boeing STEP Manufacturing Program NASA’s STEP for Aerospace Workshop King G. Yee January 18, 2001.

Rolls-Royce & Ministry of Defence Pilot for Early Implementation of PLCS Marine Olympus/Tyne Summary 3 Feb 04.

STEP MANAGEMENT OVERVIEW STEP ISO ORGANIZATIONAL STRUCTURE Module 7 Estimated Viewing Time: 40 minutes.

IT in the AEC Industry Fall, 2002 The Need for Data Exchange As computer applications became more numerous in every domain, the need and value for exchange.

1 Proposed PLCS TC Organization and Functional Responsibilities Revision

Using STEP in exchange of digital product information. Ing. Martin Molhanec, CSc.

Goal: Understand the stages in design process and the role of computer aided design. Objectives: After this chapter, you should understand the following.

Depuis WS Rome May 2008Courtesy Wolfgang Wilkes May 2008Depuis WS Rome Paul van Exel, Director USPI USPI: Association for the Oil, Gas,

Copyright LKSoftWare GmbH About STEP A rough overview on ISO Lothar Klein, LKSoftWare GmbH This work is done as part of the European.

Aerospace Industries Association - Aerospace and Defense Industries Association of Europe – Standardization (AIA-ASD Stan) LOTAR LOng Term Archiving and.

ISO TC 184/SC4 ISO TC184/SC4/WG12 N937 SC4 Opening Plenary WG12 Report San Francisco, CA, USA TC184/SC4/WG Meeting 2001/06/11 Greg A. Paul WG12 Convener.

Standards for CAD Data Exchange. The CAD data is of four types Shape Non shape Design Manufacturing data.

Howard Mason, BAE Systems Chair, ISO TC184/SC4: Industrial data

ISO STEP representation and geometry - a detailed introduction

1 Data Exchange Mark E. Sampson EMIS 8340 Systems Engineering Tool—applying tools to engineering systems.

UKCIC Masters. Scope of Product Data Exchange Manufacturers Sub Contractors Concept Design Fabricate Assemble Test/ Deliver Support Enables consistent.

©2008 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently exist.

STEP Tutorial: “STEP Capability Today and Tomorrow” Keith Hunten, Lockheed Martin January 16, 2001 ® PDES, Inc.

Communication of computerised information Dr. Norman Swindells CEng, FIMMM Ferroday Limited DEPUIS Workshop ENEA,

16 July 1999STEP for Aerospace Applications at NASA/GSFCsheet 1 ECSS Working Group “Exchange of Product Data” and related work Hans Peter de Koning (ESA/ESTEC/TOS-MCV)

1 Synchronize work on DEXs and reference data between PLCS pilots and OASIS/PLCS - Proposed PLCS TC Organization and Functional Responsibilities.

Ted Vorburger Simon Frechette, Son Manufacturing Engineering Laboratory, NIST Len Slovensky Northrop Grumman TC213 Meeting.

CAM-I Scalable Flexible Manufacturing Initiative NGMS Task 6.1.

Extensible Markup Language (XML) Extensible Markup Language (XML) is a simple, very flexible text format derived from SGML (ISO 8879).ISO 8879 XML is a.

Espri Concept Page 1 European Space AgencyFrench Space Agency Overview of STEP Protocols for Space and Current Implementations ESA / NASA Meeting, NASA.

AP210: Electrical/Electronics PCA Design Information Physical Component Placement Bare Board Geometry Layout items Layers non-planar, conductive & non-conductive.

Product data management

1 ILE Project Integrated Logistics Environment Kickoff Meeting Task 2 Completion of the Ship Common Information Model Presented by: Dr. Burton Gischner.

- Sponsored by UK MOD ISO edition 2 Rob Bodington, Phil Spiby.

1 ISO TC184/SC4 Industrial Data ISO JTC1/SC32 Meeting Berlin, Germany Gerald Radack Concurrent Technologies Corp.

Publish ISO Technical Corrigenda for ISO , and NSRP Systems Technology Panel Project Pete Lazo Product Data Services Corporation.

Joint Meeting Report on Standards 8 July Recent Accomplishments Systems Modeling Language (SysML) specification accepted for adoption by OMG AP233.

The ISO EXPRESS and Binary Data Project January 2005.

STEP Tools, Inc. 216 River Street / Troy, New York Voice: (518) / Fax: (518) The STEP.

Ken Youssefi Mechanical Engineering department 1 Introduction to Concurrent Engineering Computer Aided Design (CAD) Computer Aided Manufacturing (CAM)

Implementing Parametric CAD in STEP ???? Kenneth E. Wolsey May 16, 2007

STEP-TAS and its Benefits to Thermal Engineering STEP for Aerospace Workshop January 18, 2001 Georg Siebes.

Ship Computer Aided Design

1 Industrial Data Implementors Forum Martin Hardwick STEP Tools, Inc. June 13, 2001 San Francisco, USA.

STEP for Multi-Disciplinary Model Management: “Intelligent PDM”

STEP Tutorial: “ Fundamentals of STEP” David Briggs, Boeing January 16, 2001 ® PDES, Inc NASA STEP Workshop step.nasa.gov.

AP 220: PCA Process Planning MANUFACTURING SPECIFIC PRODUCT INFORMATION PROCESS/FACTORY CHARACTERIZATION PCB Fabrication PCA Assembly Variability Characteristics.

Drawing Structure Drawing Revision Sheet Revisions Views Drafting Specifications Contract Security Classification Approvals Responsible Organisations Product.

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. PowerPoint to accompany Krar Gill Smid Technology of Machine.

The ISO EXPRESS and Binary Data Project Last Modified: June 2005 Following ISO SC4 Valencia Meetings.

1 Margaret Christison Head of Product Data Standards Product Information Standards Defence Logistics 2004.

1 ILE Project Integrated Logistics Environment Kickoff Meeting NPDI Project & SCIM Summary & Status Presented by: Rick Lobsitz (NGTS)

Publish ISO Technical Corrigenda for ISO , and NSRP Systems Technology Panel Project Pete Lazo Product Data Services Corporation.

STEP MANAGEMENT OVERVIEW STEP ARCHITECTURE Module 4 Estimated Viewing Time: 60 Minutes.

 Eurostep 2000 The Future of STEP (ISO 10303) Bernd G. Wenzel Eurostep GmbH

Lecture and laboratory No. 13 Product data management and exchange Óbuda University John von Neumann Faculty of Informatics Institute of Applied Mathematics.

14-15 May 2008 Depuis WS Rome 1 Anna Moreno, Anna Amato Paul van Exel, David Leal, Magne ValenSendstad Anna Moreno, Anna Amato Paul van Exel, David Leal,

AFNeT Standardization Days Paris

Autodesk Inventor and STEP Solutions

SSG meeting N°27 on the 5th and 6th of July 2016

Theorem CADverter for STEP AP242

Computer Aided Design and Computer Aided Manufacturing

European A&D industries roadmap for ISO STEP standards projects

A Brief Overview of ASME Y14 Engineering Product Definition and Related Documentation Practices By Fredric Constantino.

Geometry Services for ISO – STEP standards linking product definition, management and visualization in the value chain Jean Brangé :

Tech Data Pitch Section

Model data and exchange between different models. ISO

Visualization framework based on ISO – STEP standards linking product definition, management and visualization in the value chain Jean Brangé.

Engineering IT Summary & Recommendations

Presentation transcript:

Paul van Exel, Director USPI Standards association Oil, Gas, Process & Power Industry Paul van Exel, Director USPI Standards association Oil, Gas, Process & Power Industry Depuis Workshop on International Standards Rome 14 – 15 May 2008

Data exchange/sharing during the life cycle of a plant The original STEP concept Different applications exchanging/sharing data with different formats neutral format Different applications exchanging/aharing data in a neutral format Present situationFuture situation

JAPAN, Duitsland, USA; NL: RWS/CAD; Hope/2, enz.

PDM-Schema : SAP, enz.!

NL: Estec, enz.; NASA, Lockheed (Stork?) Compliancy eis

NL: Philips (met artikelbestand PLIB); H-E (E-STEPS)

Siemens D; NL: UNETO ETIM/STEP

BMW, VW, enz.; NL Odette

NATO/CALS; NL: VNSI Project initiatie European Marine STEP Association PLIB (ISO 13584)

Epistle Core Model; ISO NL: USPI-NL, NAM, CROW, BAS,...

NL: CROW (Woordenboek/ CAD; UMW)

JAPAN, USA; NL: ???

NL: via ICAAMC (Compressoren)

PLIB (ISO 13584) Internationale artikelbestanden via Internet (XML); electronic (CIREP), ship, furniture (Funstep), enz. NL: ET Artikelbestand (UNETO)

History of STEP nIn 70’s and 80’s development of several CAD/CAM exchange standards by Industry, Defense, International efforts with limited successes. nSTEP project initiated 1984 by ISO TC184 “Industrial Automation systems and Integration” SC4 “Subcommittee “Industrial Data” nSTEP= STandard for the Exchange of Product model data: l Create single international standard, superseding national and de-facto standards l Standardize mechanism to describe product model data, independent of any system l Provide basis for exchange and sharing data nCD Ballot in 1992, Approved IS “International Standard” in 1994 nEstablished as ISO10303 series with range of protocols

Copyright LKSoftWare GmbH, STEP Standard - ISO History overview In 70’s and 80’s development of several CAD/CAM exchange standards by Industry, Defense, International efforts with limited successes. 1984: Start of the development of STEP as a sucessor of IGES, VDAFS, SET 1994: First release (published as International Standard) –AP203: Config Controlled 3D Design 2001: Second release –AP210: Electronic assembly, interconnect and packaging design –AP212: Electrotechnical design and installation –AP214: Automotive Design 2004 : Modularisierte APs –AP203 TS, AP236 Furniture –AP239: PLCS - Product Life Cycle Support 2008 / 2009 –AP203e2, AP209e2, AP210e2 –AP233: System Engineering and design 2009 … –AEC maintenance, PDQ-S, Parametrics, Cross/Super-AP ???

Copyright LKSoftWare GmbH, Methods Resources APs Modules Usage Express, STEP-File SDAI STEP-XML Binary Data Geometry, Generic – PDM Tolerances, Kinematic, Math, / /210/212/ /233/ ISO TC184/SC4 Development-Activities CAD PDM CAx Integration

Copyright LKSoftWare GmbH, ISO Applikations-Protokolle (AP) (1/2) General, Mechanical 2D, 3D Part 201: Explicit draughting (einfache 2D Zeichnungen) Part 202: Associative draughting (2D-Zeichnungen mit Bezug zu 3D-Modellen) Part 203: Configuration controlled design (3D-Design) Part 204: Mechanical design using boundary representation Part 207: Sheet metal die planning and design Part 214: Core data for automotive mechanical design processes Manufacturing: Part 223: Cast Parts Part 224: Mechanical product definition for process planning using machining features Part 229: Forged part Part 236: Furniture product data and project data Part 238: Application interpreted model for computer numeric controllers Part 240: Process plans for machined products Schipp: Part 215: Ship arrangement Part 216: Ship moulded forms Part 218: Ship structures

Copyright LKSoftWare GmbH, ISO Applikations-Protokolle (AP) (2/2) Elektrik/Elektronik Part 210: Electronic assembly, interconnection, and packaging design Part 212: Electrotechnical design and installation (Kabelstr ä nge, Energieverteilung,... Zusammen mit AP214) Simulation und Materialien Part 209: Composite and metallic structural analysis and related design Part 235: Materials information for the design and verification of products Part 237: Fluid dynamics (AWI) Anlagen / Wartung Part 221: Functional data and their schematic representation for process plants Part 225: Building elements using explicit shape representation Part 227: Plant spatial configuration Part 239: Product life cycle support Part 241, AEC maintenance (planned) Andere Part 232: Technical data packaging core information and exchange Part 233: Systems engineering data representation

Application modules ISO xx and 1xxx (>500) Copyright LKSoftWare GmbH,

Super AP – a very draft idea for now A new AP for Cross AP implementations Implementors wants to have only one top schema to use A kind of „union“ of other APs Modular based approach: go for a yearly update – stepmod as a database standard (ISO ) 2008: Start with combining final and released modules form AP203, 210, 236, : add AP209 and 233, PDQ-S 2010-: parametrics, constraint models, kinematics, manufacturing Copyright LKSoftWare GmbH,