FALLING SHAPES BY LUCA GURGULINO.

Slides:



Advertisements
Similar presentations
EXPERIMENTAL DESIGN Science answers questions with experiments.
Advertisements

Shelby Emily Lauren Clair
Information contained here is taken from Junction Hill.
EXPERIMENTAL DESIGN Science answers questions with experiments.
Testing Variables Students will manipulate variables of a pendulum; draw conclusions from experimentation with pendulums Why should you test only one variable.
STEM FAIR PROJECT Pendulum Problem Miss Daskivich’s 3 rd Grade Class - Northview Elementary.
By : Ranivic Marciano.  The goal of this project is to construct a parachute that will not only stay in the air the longest, but also be the closest.
EXPERIMENTAL DESIGN Developed by Kathy Melvin Presented by Dr.Gerard J. Putz Science answers questions with experiments.
EXPERIMENTAL DESIGN Science answers questions with experiments.
Marking Parachute Plan
PROBLEM STATEMENT Which factor affects the efficiency of a rocket’s hang time, the placement of its fins, above or below the center of gravity or the size.
Unit 04 “Vertical Motion”
Parachutes D. Crowley, Parachutes To be able to make parachutes which will travel at different speeds Friday, August 07, 2015.
Mass & Speed D. Crowley, 2008.
BY: Jorge Quesada Research Elasticity Friction Air Resistance.
.. How do differences in surface affect the adhesiveness of tape?
 The purpose of this project is to determine how differences in surface affect the adhesiveness of tape. This is important to know because we want.
Quiz-Warm Up! Remember 5 minutes only!
Wednesday Warm Up October 16.
Grade 5 Quarter 1 Essential Lab # 3
Tuesday Warm Up October 15.
Design and test a parachute What you'll need: –A plastic bag or light material –Scissors –String –A small object to act as the weight, a little action.
Car with Parachute Workshop 1 : Make a canopy of any shape
THE TAPE CHALLENGE.
Jose R. Sanchez Jonathan Ryberg Chris Weisman
Does More Powerful Really Mean More Power?
Parachute Egg Drop Challenge January 31, Background Air resistance is the force that opposes the motion of objects through air. – The amount of.
COMPILED BY: GARRETT SCHATTE SCIENTIFIC METHOD. OBJECTIVES 1.Develop a hypothesis 2.Develop an experiment to test a hypothesis 3.Collect data 4.Make measurements.
By: Hanna Briestensky Problem Determine how the height from which the ball is dropped, effects how high that the ball will bounce back up.
Participants Kristen Lyne Krystle Goetz Austin Nichols Jaron Nichols.
Pendulums… Competency Goal 4: Conduct investigations and use appropriate technologies to build an understanding of forces and motion in technological designs.
EXPERIMENTAL DESIGN Science answers questions with experiments.
The Super Ball Project. QUESTION Does a surface effect the bounce of a super ball?
By: Will Schubert. Determine how the height you drop a ball from affects the height the ball bounces back up. Problem.
Forces In Action presentation Aligned to Grade 5 Quarter 1
Cyrique Pitt and Jared Burns.  Goal: Our goal for this challenge was to make the best parachute possible that can carry a weight for the longest amount.
Also called the scientific process SCIENTIFIC METHOD.
The Parachute Drop. What is Air Resistance? Air resistance is the force exerted by air against an object moving through it and acts in the opposite direction.
EXPERIMENTAL DESIGN Science answers questions with experiments.
Physics Investigation Formative Feedback 23/05/16.
Marble Incline Plane Lab By: Oliver Homann, Murphy West, and Luke Johnson.
Helicopter Experiment
1st marking period Physics Project Ideas
Gravity & Air Resistance
The Scientific Method and Experimental Design
Activity 3.
EXPERIMENTAL DESIGN Science answers questions with experiments.
INQUIRY UNIT How to
Science Fair Materials, Procedures, Identification of Variables
Bell Ringer What is an IV? Describe… What is a DV? Describe…
By Mo Dao Hau, Rhon, Elijah, Su Qi Lan, Zeng Yun Ting
Monday, December 6, 2016 Your Learning Goal: Students will test and analyze several different parachutes to determine the best one. Table of Contents:
Variables in a Controlled Experiment
How to Write a Lab Report
OUR PERFECT PARACHUTE.
Bell Ringer (9/18) Alex and Jordan disagree on which type of rubber ball bounces the highest. One is completely solid, one is completely hollow, and another.
Science Project Learning “The Perfect Parachute”
My Perfect Parachute By Group: 4 (2A) Group Leader: Carlos
Our perfect parachute Leader : khan noman Irfan Members : ABDUL REHMAN
My Prefect parachute Group 3 LEADER:WIDY Members:Haris (11)
Leader:GHALIB KHAN Member:ABDUL KAREEM ASIF KHAN MOHAMMAD SHAKER
By Michel Moninger 8th Grade
Scientific Method.
Marvellous Motion Episode 1 1.
Thematic inquiry My perfect parachute
Experiment #2: Parachute Shape
Pull the spring scale a longer distance.
By umaya,kuljit and nimra
Presentation transcript:

FALLING SHAPES BY LUCA GURGULINO

PROBLEM STATEMENT What effect does the shape of a parachute have on the time it takes to reach the ground from a given point?

HYPOTHOESIS If the parachute is a circular formatted shape, then the parachute will take longer to reach the ground than parachutes made with square, triangular or rectangular shapes.

VARIABLE Independent variable -the shape of the parachute -time taken to reach the ground Control variable -same materials -height of release -size of parachute -the weight at the bottom of the parachute -location of drop

MATERIALS Four plastic bags from super market One small plastic action figure A spool of yarn Ruler One pair of scissors Step ladder Timer Measuring tape

PROCEDURES Cut a square from the plastic bag measuring 16 cm x 16 cm Cut a triangle with a base of 16 cm and a height 32 cm from the plastic bag Cut a rectangle from the plastic bag measuring 32 cm x by 8 cm Cut a circle with a diameter of 18 cm from the plastic bag Cut 1 cm slits on each corner of the shapes (square, rectangle, and triangle) Cut 1 cm slits at four points (end of diameter) on the circle

PROCEDURE 7. Cut 15 pieces of yarn measuring 16 cm 8. Tie one string in each slit of the parachutes 9. Measure and mark the height of 3.5 meters 10. Attach action figure to the square parachute 11. Release parachute from marked point and start timer 12. Record time taken to reach the ground 13. Repeat steps 11 and 12 two more times 14. Record time taken to reach the ground 15. De attach action figure from square parachute and attach it to triangular parachute.

PROCEDURE 16. Repeat 11 and 12 on triangular shaped parachute 17.De attach action figure from triangle parachute attach it to rectangular parachute 18.Repeat 11 and 12 on rectangular shaped parachute 19. De attach action figure from parachute attach it to the circular parachute 20. Repeat 11 and 12 on circular shaped parachute 21. De attach action figure from circular shaped parachute 22. Write all data into data table.

TIME TAKEN TO REACH THE GROUND DATA TIME TAKEN TO REACH THE GROUND (IN SECONDS) SHAPE TRIAL 1 TRIAL 2 TRIAL 3 AVERAGE CIRCLE 2.76 1.28 2.10 2.04 SQUARE 2.19 1.43 1.63 RECTANGLE 1.46 1.06 0.84 1.12 TRIANGLE 1.01 1.86 2.65 1.84

DATA

RESULTS From the data, it was observed that the circular shaped parachute had the greatest amount of air time. On the other hand, the rectangular shaped parachute had the least amount of air time. The data shows that the times the different shaped parachutes took to reach the ground averaged between 1.00 and 3.00 seconds. The average for the circular parachute was 2.04 sec. , the square took 1.63 sec. , the rectangular shaped parachute took 1.12 sec. , and the triangular one took 1.84 sec.. The range in time was a difference of 0.92 sec.. Although the hypothesis was supported by the data, the validity of this data may have been effected by the unexpected variables such as wind and height of release. It is obvious from the data that the independent variable did have a slight effect on the dependent variable.

CONCLUSION This experiment tested whether the shape of a parachute effected the time it took to reach the ground. From the data, it was observed that the circular shaped parachute had the greatest amount of air time and the rectangular shaped parachute had the least amount of air time. The average for the circular parachute was 2.04 sec. , the square took 1.63 sec. , the rectangular shaped parachute took 1.12 sec. , and the triangular one took 1.84 sec.. The range in time was a difference of 0.92 sec.. Although the hypothesis was supported by the data, the validity of this data may have been effected by the unexpected variables such as wind and height of release. According to other experiments done, the circular shaped parachute has the greater air time. This is due to the bubble the circular shaped parachute forms creating a greater drag.

CONCLUSION cont. To improve this experiment, the area of release would require more control. Perhaps conducting the experiment in doors and having a contraption release the parachute would limit the outside variables. Additionally, the material used for the parachute could also be replaced with a thicker material. If this experiment were to be conducted again, it is recommended to use a larger surface area when creating the different shaped parachutes. It would be interesting to know if the size would result in different outcomes.

ABSTRACT The purpose of this experiment was to investigate whether different shaped parachutes of the same surface area would affect the amount of time it took to reach the ground. To conduct the experiment different shapes (rectangle, square, triangle, and circle) with a surface area of 256 cm sq. were cut from a plastic bag. After attaching the parachute to a controlled amount of mass, the parachute was released from a controlled height and its airtime was recorded. Although some of the results may have been inaccurate due to the unforeseen wind, the data indicated that the circular shaped parachute had the greatest amount of airtime. It also demonstrated that the rectangular parachute had the least airtime.

ABSTRACT CONT. The average airtime among all shapes was between 1 and 3 seconds. At the beginning of the experiment it was hypothesized that the circular parachute would take the longest time to reach the ground. This hypothesis was proven to be correct. In the future it is recommended that this experiment.

APPLICATION This experiment can be very beneficial for paragliders, air force men, parasailors, and anyone working in the parachute industry. This data demonstrates that circular shaped parachutes are more effective gliding through the air. If airtime is what they need, the circular shape is the best to use. However, if trying to parasail, a rectangular shape would be more beneficial because it can create a greater drag and keeps the parasailor in the air longer.

BIBILIOGRAPHY “How Does Shape of a Parachute Affect Its Performance?" How Does Shape of a Parachute Affect Its Performance? 2 Sept. 2004. Web. 2 Oct. 2014. Koonts, Robin. "Parachutes, Gravity and Air Resistance - KIDS DISCOVER." KIDS DISCOVER. 7 Aug. 2014. Web. 17 Oct. 2014. Woodford, Chris. "Parachutes." How Parachutes Work. 10 Oct. 2014. Web. 30 Oct. 2014.