Paradox Communication Solution GPRS / GSM PCS100 Paradox Communication Solution GPRS / GSM

GSM & GPRS Technology GSM (Global system for Mobile Communications) GSM standard is an open digital cellular technology used for transmitting voice and data services GSM is circuit switched Uses a dedicated channel for exclusive use of the circuit GPRS (General Packet Radio Service) GPRS is a data service available to users of the GSM network GPRS is “always on” and packet switched Data is sliced into packets and transmitted through the GSM network

PCS100 Overview Landline Paradox Control Panel PCS100 SMS GPRS GPRS/GSM * Connect Voice Module (VDMP3) to control panel for landline or PCS100 for GSM voice channel (GSM edition).

GPRS Edition VS. GSM Edition The GSM Edition V1.07 provides Paradox control panels with full GSM capabilities The GPRS Edition V1.60 or higher for full GPRS capabilities Either system can be upgraded or downgraded to provide either capabilities

PCS100 GPRS vs. GSM Edition Feature PCS100 V1.60 (GPRS Edition) PCS100 V1.07 (GSM Edition) GPRS Reporting √ - GPRS Upload/Download GPRS PCS100 Firmware Upgrade GPRS Panel Firmware Upgrade Standard Local PCS100 Firmware Upgrade GSM Reporting SMS (Text Message) System Notification SMS (Text Message) Arming/Disarming Voice with VDMP3 Supports CVT485 Supports Antenna Extensions Serial Cable Modified Serial Cable Standard Serial Cable

Upload/Download via GPRS GPRS & GSM Edition Upload/Download via GPRS Supports connection to WinLoad and NEware through a GPRS connection GPRS allows internet communications at data rates of up to 38.8Kbit/s

Reporting Can be used as a primary dialer, backup dialer, or both GPRS & GSM Edition Reporting Can be used as a primary dialer, backup dialer, or both Supports all control panel reporting formats (GSM only) Reports system events to a monitoring station over an IP network (GPRS edition)

SMS Notification of System Events GPRS & GSM Edition SMS Notification of System Events Sends notification of system events and troubles through SMS messages Notification for up to 16 phone numbers SMS messages available in multiple languages (installer selectable)

SMS Notification of System Events GPRS & GSM Edition SMS Notification of System Events Detailed, pre-defined messages (up to 140 characters) including event description, site name, date, time, and any associated configurable labels such as zone, area, and serial number

GPRS & GSM Edition Event Notification Can receive notification of four event groups for specified partitions: Alarm Arming / Disarming Trouble Trouble Restore

GPRS & GSM Edition Event Notification

GSM Edition Control System via SMS Use SMS text messages to control the security system (GSM Edition) From any SMS-enabled phone you can: Arm / disarm the panel Request system status

Voice Messages through GSM GSM Edition Voice Messages through GSM The PCS100 (GSM edition) is fully compatible with the VDMP3 Paradox Plug-In Voice Module Can send pre-recorded voice messages to up to 8 phone numbers to report alarms Arm / disarm, request system status and control PGMs using a voice-guided menu

GPRS & GSM Edition Supervision Supervises connection to control panel and to the GSM network (will send report to monitoring station if communication is lost) RF jamming supervision

Special Features Proprietary communication with control panels Available in multiple languages Comprehensive diagnostic LEDs Signal strength indicator Simple installation: insert SIM card and connect 4 wires

Antenna Extensions Use an antenna extension for improved reception GPRS & GSM Edition Antenna Extensions Use an antenna extension for improved reception Available antenna extensions (sold separately): EXT2 2m(6ft) EXT4 4m(12ft) EXT7 7m(24ft) EXT15 14.5m(48ft) EXT18 18m(60ft)

GSM Edition CVT485 The CVT485 converts the serial communication between the PCS100 (GSM edition) and the control panel into RS-485 communication. This allows the PCS100 (GSM edition) to communicate with the control panel from up to 300m (1000ft.) away.

PCS100 Firmware Upgrade Standard local PCS100 firmware upgrade GPRS & GSM Edition PCS100 Firmware Upgrade Standard local PCS100 firmware upgrade Firmware of PCS100 (GPRS edition) and control panels can be upgraded using WinLoad 2 methods of upgrading (GPRS edition) Remotely via GPRS network Physical connection to the PCS100 module

Summary Upload / download Reporting SMS notification of system events Control system via SMS (GSM edition) Voice messages through GSM (GSM edition)

Thank You