1. GS2065/TL265GS Product Technical Training (International version)
2-Way Wireless Security Suite

2. GS2065/TL265GS – Product Overview
2-Way Wireless Security Suite

3. 2-Way Wireless Security Suite
GS2065
GS2065 GSM/GPRS Wireless Alarm Communicator
Overview:
The GS2065 provides primary or backup GSM/GPRS communication for the Alexor 2-way wireless security suite
Specifications:
Dimensions : 3.937"x5.875"x0.625"
(100mmx150mmx15mm)
Weight : 68 g
Antenna Gain : 2db
Input Voltage : 11.1 to 12.6 V (from the
PC-Link header)
Current Draw : 65 mA at 12V (400 mA
during the GSM transmission)
Operating Environment : 5 º C to 40º C
(40º F to 104º F)
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

4. 2-Way Wireless Security Suite
GS2065
GS2065 GSM/GPRS Wireless Alarm Communicator
Features:
Back up and primary GSM/GPRS alarm communication
Panel remote uploading/downloading support via GSM/GPRS
Advanced remote and local programming via DLS IV
Keypad programming through WT5500 wireless keypad
Individual Periodic Test Transmission via GSM/GPRS
Supervision heartbeats via GSM/GPRS
128-bit AES encryption over GSM/GPRS
Full event reporting
Installer code
SIA format
PC-Link connection
Signal strength and trouble display
Optional Network Lock and SIM Lock
PC9155 replacement front plate (8 LEDs) included
Quad-Band: 850 MHz, 1900 MHz, 900 MHz and 1800 MHz
READ SCREEN
2-Way Wireless Security Suite

5. 2-Way Wireless Security Suite
GS2065
GS2065 GSM/GPRS Wireless Alarm Communicator
Compatible Control Panel:
PC9155 Alexor Wireless Panel version 1.0 and higher
Compatible Receivers:
Sur-Gard System I Receiver: version 1.10 and higher
Sur-Gard System II Receiver: version 2.00 and higher
Sur-Gard SG-DRL3-IP: version 2.20 and higher (for Sur-Gard System III Receiver)
Product Model and Accessories:
GS2065GS: For international market
GS-15ANTQ: Antenna Extension Kits with 15 feet cable
GS-25ANTQ: Antenna Extension Kits with 25 feet cable
GS-50ANTQ: Antenna Extension Kits with 50 feet cable
PCLINK-5WP: PCLINK Kits for the programming with DLS IV
Add model number, panel and cabinet for hybrid
Add Antenna kits and PCLINK-5WP for INT
READ SCREEN
2-Way Wireless Security Suite

6. 2-Way Wireless Security Suite
TL265GS
TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Overview:
The TL265GS is an Internet and GSM/GPRS Dual-Path alarm communicator for the Alexor 2-way wireless security suite
Specifications:
Dimensions : 3.937"x5.875"x0.625"
(100mmx150mmx18mm)
Weight : 78 g
Antenna Gain : 2db
Input Voltage : 11.1 to 12.6 V (from the
PC-Link header)
Current Draw : 100 mA at 12V (400 mA
during the GSM transmission)
Operating Environment : 5 º C to 40º C
(40º F to 104º F)
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

7. 2-Way Wireless Security Suite
TL265GS
TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Features:
Fully redundant Internet and GSM/GPRS dual-path alarm communication
Integrated call routing
Panel remote uploading/downloading support via GSM/GPRS and Internet
Advanced remote and local programming via DLS IV
Keypad programming through WT5500 wireless keypad
Individual Periodic Test Transmission via GSM/GPRS and Internet
Supervision heartbeats via GSM/GPRS and Internet
128-bit AES encryption via GSM/GPRS and Internet
Full event reporting
Installer code
SIA format
PC-Link connection
Signal strength and trouble display
Optional Network Lock and SIM Lock
PC9155 replacement front plate (8 LEDs) included
Quad-Band: 850 MHz, 1900 MHz, 900 MHz and 1800 MHz
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

8. 2-Way Wireless Security Suite
TL265GS
TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Compatible Control Panel:
PC9155 Alexor Wireless Panel version 1.0 and higher
Compatible Receivers:
Sur-Gard System I Receiver: version 1.10 and higher
Sur-Gard System II Receiver: version 2.00 and higher
Sur-Gard SG-DRL3-IP: version 2.20 and higher (for Sur-Gard System III Receiver)
Product Model and Accessories:
TL265GS: For International market
GS-15ANTQ: Antenna Extension Kits with 15 feet cable
GS-25ANTQ: Antenna Extension Kits with 25 feet cable
GS-50ANTQ: Antenna Extension Kits with 50 feet cable
PCLINK-5WP: PCLINK Kits for the programming with DLS IV
READ SCREEN
PASS MODULE AROUND
2-Way Wireless Security Suite

9. 2-Way Wireless Security Suite
Global Approvals
GS2065 GSM/GPRS Wireless Alarm Communicator
TL265GS Internet and GSM/GPRS Dual-Path Alarm Communicator
Now
FCC/IC, UL, ULC (North America)
CE, WEEE (Europe)
A-Tick (Australia/New Zealand)
September 2009
ANATEL (Brazil)
CNC (Argentina)
ICASA (South Africa)
November 2009
IMQ (Italy)
2-Way Wireless Security Suite

10. GS2065/TL265GS – Installation and programming
2-Way Wireless Security Suite

11. 2-Way Wireless Security Suite
Installation
GS2065/TL265GS Installation
BEFORE YOU BEGIN
Have the following ready before installation:
DSC DLS IV Programming Software
Control panel backup battery
Battery connection harness
Batteries for WT way wireless keypad
Screwdriver
PCLINK-5WP Kits
PCLINK Header (Female)
RJ11 cable
Serial Header (DB9)
Transformer (w/ connector to PCLINK header)
4 power plugs (international plugs)
READ SCREEN
2-Way Wireless Security Suite

12. 2-Way Wireless Security Suite
Installation
GS2065/TL265GS Installation
Summary of Installation Steps
Step 1 – Connect the PCLINK-5WP cable between the computer and GS2065/TL265GS
Step 2 – Program the GS2065/TL265GS using DLS IV
Step 3 – Insert the SIM card in the GS2065/TL265GS
Step 4 – Connect the GS2065/TL265GS to the PC9155
Step 5 – Test for best signal strength location
Step 6 – Program Communication Sections on the PC9155 via keypad
Step 7 – Test communication
NOTE: All the options of the communicator also could be programmed through WT way wireless keypad. Please see details in product manual.
Check steps
READ SCREEN
2-Way Wireless Security Suite

13. 2-Way Wireless Security Suite
Installation
READ SCREEN
2-Way Wireless Security Suite

14. 2-Way Wireless Security Suite
Installation
READ SCREEN
2-Way Wireless Security Suite

15. 2-Way Wireless Security Suite
Installation
Step 2.2 – Create an account
Select ‘New Account’
Enter the account details
Account Name
Panel Type (Communicator Module)
Connection Type (TL Network)
READ SCREEN
2-Way Wireless Security Suite

16. 2-Way Wireless Security Suite
Installation
Step 2.3 – Module IP Address
Enter the IP address for the module
READ SCREEN
2-Way Wireless Security Suite

17. 2-Way Wireless Security Suite
Installation
Step 2.4 – Enter SMS Details
Change ‘Connection Type’ to ‘SMS’
Enter a ‘User Name’
Enter a ‘Password’
Select ‘Create’
READ SCREEN
2-Way Wireless Security Suite

18. 2-Way Wireless Security Suite
Installation
Step 2.5 – Program the GS/IP options
The account will open
Select the ‘GS/IP’ tab
Enter the required information in the ‘GS/IP Options’ screen
READ SCREEN
2-Way Wireless Security Suite

19. 2-Way Wireless Security Suite
Installation
Step 2.6 – Program the Receivers options
Enter the required information in the ‘Receivers’ screen
READ SCREEN
2-Way Wireless Security Suite

20. 2-Way Wireless Security Suite
Installation
Step 2.7 – Program the GPRS options
Enter the required information in the ‘GPRS’ screen
READ SCREEN
2-Way Wireless Security Suite

21. 2-Way Wireless Security Suite
Installation
Step 2.8 – Load the programming to the communicator
Use “Global Download” and choose “PC-LINK” as the connection type. Then click “OK”
READ SCREEN
2-Way Wireless Security Suite

22. 2-Way Wireless Security Suite
Installation
READ SCREEN
2-Way Wireless Security Suite

23. 2-Way Wireless Security Suite
Installation
GS2065/TL265GS Installation
Step 4 – Install and wire the communicator to the control panel (on-site)
GS2065/TL265GS: See details in product manual for PC9155 control panel
For PC9155D or PC9155G Kit, GS2065/TL265GS is pre-installed with the control panel
Red Wire
READ SCREEN
2-Way Wireless Security Suite

24. 2-Way Wireless Security Suite
Installation
GS2065/TL265GS Installation
Step 5 - Test for best signal strength location
Ensure the SIM card is inserted
Power up the control panel
Check Green LEDs. You must achieve full or medium signal strength. See details in product manual.
If signal strength is poor, must relocate the control panel or use an external extension antenna kits
READ SCREEN
2-Way Wireless Security Suite

25. 2-Way Wireless Security Suite
Installation
GS2065/TL265GS Installation
Step 6 – Program communication options on the control
panel via keypad
GS2065/TL265GS with PC9155 control panel
o Sections [301], [302], [303], [305] : Program Communication Path
• DCAA - Internal (Ethernet 1, Ethernet 2, GPRS 1,
GPRS 2)
• DCBB - Ethernet Receiver 1
• DCCC - Ethernet Receiver 2 (backup)
• DCDD - GPRS Receiver 1
• DCEE - GPRS Receiver 2 (backup)
o Section [350] : Program Communication Format (Communicator)
• (If Option [301] (above) is set to DCAA, Option [350] must be
set to SIA, sub-option 5)
o Sections [351] to [376] : Program Call Direction
o Section [382] : Enable T-LINK Interface (Option [5])
o Section [383] : Program Back-up or Independent Communication
o Section [167] : Enable Communication Wait For ACK (Set to 60 seconds)
o Section [401] : Enable DLS Session Through GPRS or Ethernet (Option [1])
READ SCREEN
2-Way Wireless Security Suite

26. 2-Way Wireless Security Suite
Installation
GS2065/TL265GS Installation
Step 7 – Test communication
1. Disconnect incoming phone line from TIP and RING on the control panel
2. Verify that LED 2 is on, this indicate that the unit is active
3. Create an alarm transmission
4. Verify alarm transmission by calling monitoring station
5. Re-connect the phone line, if necessary
For back-up communication applications, perform steps 1 to 5
For primary communication applications, perform steps 3 and 4 only
READ SCREEN
2-Way Wireless Security Suite

27. 2-Way Wireless Security Suite
Programming
GS2065/TL265GS Remote Programming
We need several slides here to show how remotely get the DSL connection to re-program the communicator
Via Ethernet/Internet connection
Vis SMS initiated connection
READ SCREEN
2-Way Wireless Security Suite

28. 2-Way Wireless Security Suite
Installation
LED Display
Trouble Status LED (Yellow)
Please see details about the trouble shooting on page 17 in product manual
2-Way Wireless Security Suite

29. 2-Way Wireless Security Suite
Installation
LED Display
Network Connection Status LED (Red)
LED OFF
No network connection issue present
LED ON
Physical Ethernet cable is not connected
DHCP configuration fails
Fails to get an IP address from the GPRS network
GPRS connections has been reset
LED blinks quickly once
Ethernet transmitting
LDE blinks quickly twice
Ethernet receiving
2-Way Wireless Security Suite

30. 2-Way Wireless Security Suite
Installation
LED Display
Signal Strength LED 2 (Green)
Signal Strength LED 1 (Green)
Green LED 2 blinks quickly once
GPRS transmitting
Green LED 2 blinks quickly twice
GPRS receiving
2-Way Wireless Security Suite

31. 2-Way Wireless Security Suite
Installation
Keypad Trouble Display
Trouble Condition
Alternate Communicator Trouble
Description
SIM Card Lock
GSM Trouble
Ethernet Trouble
Central Station Receiver Trouble
Supervision Trouble
SMS Config Trouble
2-Way Wireless Security Suite

32. GS2065/TL265GS – Applications
2-Way Wireless Security Suite

33. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (Internal)
Communicator Controlled Call Routing
– Backup (dual-path)
– Redundant (dual-path)
Required Programming
Panel Sections [301], [302],[303] and [305]
• Any of them could be programmed as DCAA
DCAA (default): Ethernet 1 → Ethernet 2 → GRPS 1 → GPRS 2
Communicator Sections [005]
Option [004] - Primary and backup path
[ON]: GPRS path primary, Ethernet path backup
[OFF]: Ethernet path primary, GPRS path backup
Option [005] - Redundant between GPRS path and Ethernet path
[OFF]: Disable redundancy
[ON]: Enable redundancy
READ SCREEN
2-Way Wireless Security Suite

34. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (Internal)
Backup Mode 1: Ethernet Primary, 4 Receivers
READ SCREEN
2-Way Wireless Security Suite

35. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (Internal)
Backup Mode 2: Ethernet Primary, 2 Receivers
READ SCREEN
2-Way Wireless Security Suite

36. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (Internal)
Backup Mode 3: GPRS Primary, 4 Receivers
READ SCREEN
2-Way Wireless Security Suite

37. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (Internal)
Backup Mode 4: GPRS Primary, 2 Receivers
READ SCREEN
2-Way Wireless Security Suite

38. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (Internal)
Redundant Mode: 4 Receivers
– (Redundancy between GSM/GPRS path and Ethernet/Internet path)
READ SCREEN
NOTE: The application requires 4 different SG receivers or SG-DLR3 IP line cards
2-Way Wireless Security Suite

39. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (External)
PC9155 Panel Controlled Call Routing
Backup (triple-path)
• Panel section [383] – Options [2],[3] and [4] enabled
• Panel section [380], Option [6] disabled
Redundant (triple-path)
• Panel sections [351] – [376] Options enabled
Alternate (triple-path)
• Panel section [380] – Option [6] enabled
Required Programming
Panel Sections [301], [302],[303] and [305]
• Phone #: Phone number of the receiver
• DCBB: Ethernet Receiver 1
• DCCC: Ethernet Receiver 2
• DCDD: GPRS Receiver 1
• DCEE: GPRS Receiver 2
READ SCREEN
2-Way Wireless Security Suite

40. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (External)
PC9155 Panel Controlled Call Routing
–Backup: Panel Section [383] – Options [2],[3] and [4] enabled
READ SCREEN
2-Way Wireless Security Suite

41. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (External)
PC9155 Panel Controlled Call Routing
– Redundant: Panel Sections [351] – [376] Options enabled
READ SCREEN
2-Way Wireless Security Suite

42. 2-Way Wireless Security Suite
Applications
GS2065/TL265GS Call Routing (External)
PC9155 Panel Controlled Call Routing
–Alternate: Panel section [380] – Option [6] enabled
READ SCREEN
2-Way Wireless Security Suite

43. 2-Way Wireless Security Suite
Applications
Other Applications
Keypad Programming
All options of the communicator could be programmed from WT5500 keypad
Control Panel option [851], Communicator option [999]-55
NOTE: A module reset is required if any options have been changed by the keypad.
Periodic Test transmission
Individual periodic test transmission via GPRS and Ethernet
Customized Time of Day for test transmission
Daily, Weekly and Monthly Interval
Communicator Options [026], [028], [029], [124], [125], [224] and [225]
NOTE: Enabling this feature will require more data usage.
Encryption
128 Bit AES Encryption
Turned on by central monitoring station Sur-Gard receiver
Encrypted communications enabled after next event sent to the receiver
READ SCREEN
2-Way Wireless Security Suite

44. 2-Way Wireless Security Suite
Applications
Other Applications
Supervision Type
Commercial Type and Residential Type
Commercial Type can Swap Detection and require more data usage than Residential Type
Communicator option [005]-[3]
Heartbeats Interval
Should be 65 seconds less than the supervision window programmed at the receiver.
Send heartbeats to Ethernet 1 and/or GRPS 1 receiver
Communicator option [004] and [005]-[1]&[2]
NOTE: Enabling this feature will require more data usage.
READ SCREEN
2-Way Wireless Security Suite

45. 2-Way Wireless Security Suite
Applications
Other Applications
Installer Code
Required to program the communicator by using DLS IV remotely/locally
Communicator option [11]
Optional Carrier and SIM Lock
Lock the unit to a specific carrier’s network
Lock the unit to a SIM card with a specific PIN number
NOTE: This feature is available upon request of specific carrier networks.
Public APN
Use Public APN for DLS session if the communicator is operating on a private APN
GPRS Login User Name and Password might be required
Communicator option [221] to [223]
READ SCREEN
2-Way Wireless Security Suite

46. 2-Way Wireless Security Suite
Applications
Other Applications
Power Save Mode
Extend the battery duration when an AC power loss on control panel
Ethernet functionality turned off until a new event need to be transmitted
Network Connections LED: OFF
Incoming DLS connection will not be possible
Hardware Default
Reset the programming options to the factory setting (default values)
NOTE: Please see details in product manual
Software Update
Update the firmware through DLS IV locally via PCLINK
Update the firmware through DLS IV remotely via Ethernet/Internet (TL265GS only)
Communicator option [005]-[6]
READ SCREEN
2-Way Wireless Security Suite

47. 2-Way Wireless Security Suite
Applications
Other Applications
System Information
Upload and read the system status by using DLS IV
Also readable from WT5500 keypad
Firmware version
Ethernet IP address
Ethernet gateway IP address
GRPS IP address
SIM number
GSM phone number
IMEI number
MAC address
Module Default/Reset
READ SCREEN
2-Way Wireless Security Suite

48. 2-Way Wireless Security Suite
Applications
SIA Report Code
Event SIA Data Code SIA Address Field
Panel Absent Trouble ET
Panel Absent Trouble Restore ER
Radio Activation Restore RS
Ethernet 1 Test Transmission RP
GPRS 1 Test Transmission RP
GPRS 2 Test Transmission RP
FTC Restore YK
Example: Nri0 ET001
N= New Event
ri0=Partition/Area identifier
ET= Panel Absent Restore
001=Zone 001
NOTE: GPRS 2 Test Transmission will only be sent when two different APNs are programmed.
READ SCREEN
2-Way Wireless Security Suite