Presentation on theme: "AVT2000D is a portable and compact in size magnetic installation vehicle tracking device which is easy in mounting and hiding to where there is the metal."— Presentation transcript:
AVT2000D is a portable and compact in size magnetic installation vehicle tracking device which is easy in mounting and hiding to where there is the metal material in a vehicle. With the superior GPS, GSM/GPRS modules on board, AVT2000D could be used as the security tracking, for vehicle security, home security or any in secret monitoring application. AVT2000D also provides a extension port for integrating with the peripheral devices, such as temperature sensor, CCTV, Wifi, iButton, or RFID solution. Support GSM 850/900/1800/1900 MHZ AVT-2000 Series APPLICATIONS 1.Fleet management 2.Asset tracking. 3.Equipment monitoring. 4.Marine tracking. 5.Container tracking.
Main Features Specification 1.Communication by Voice, CS Data, SMS, GPRS UDP/TCP for 2G. 2.Communication by Voice, SMS, Edge, UMTS and HSDPA for 3G 3.Configurable Tracking & Logging mode, by Time interval, Distance interval, Speeding changes, Heading changes and IG status. 4. User Defined Interface (UDI), expandable for customization. 5.GPS/GSM antenna tempering alert 6.GSM Jamming alert (optional). 7.Geo-fencing control. 8.Mileage report. 9.Power Low/Lost alert 10.Towing away alert. 11.Speeding alert 12.Power Management 13.Roaming preference settings. 14.Maximum 100 settings in user defined reports. 15.Internet Surfing via USB connection. 16.Configuration over the air. 17.Firmware upgrading over the air. 1.Dimensions (L x W x H): 115x75x32 mm. 2.asing : ABS plastic. 3.GPS Module:66 channels high sensitivity GPS receiver. 4.Communication:Quad-band 850/900/1800/1900 MHz in 2G GSM/GPRS or Tri-band 850/900/2100 MHz in 3G UMTS/HSDPA. 5.Power Source: DC 8-40V,Power Consumption in sleeping mode: <10uA@ DC 3.7V, back-up battery power supply condition <4mA@ DC 12V, main power supply condition. 6.Memory Capacity:4MB,storage over 100,000 waypoints 7.System Setting:100 user defined events. 8.Device Ports:4 input ports, with 2 positive triggering and 2 negative triggering (includes 2 analog) 4 output ports, 4 negative triggering 1 serial port, TTL/RS232 switching by command 1 mini USB port for configuration. 9.GPS Antenna: External (SMA connector type) and Internal. 10.GSM Antenna: External (SMA connector type) and Internal. 11.Motion Sensor: Tri-axial acceleration sensor. 12.Back-up Battery: Lithium battery with 860mAH capacity. 13.Operating Temperature: -20°C ~ 80°C (without back-up battery condition). 14.User Defined Interface( UDI): Optional. 15.4GHz RF Transceiver: Optional