Firearms Identification Mr. Tomasevich Forensics.

Slides:



Advertisements
Similar presentations
Firearms Notes Forensic Science.
Advertisements

the study of projectiles (bullets) and firearms
Firearms Identification Mr. Tomasevich Forensics.
Ballistics & Firearms.
Question The inner surface of the barrel of a gun leaves its markings on a bullet passing through it. These markings are peculiar to each gun. Would these.
Chapter 15 FIREARMS, TOOL MARKS, AND OTHER IMPRESSIONS
Chapter 17 Ballistics By the end of this chapter you will be able to:
Chapter 15: Firearms, Tool Marks, and Other Impressions
Syracuse University June, 2010
Ballistics & Impressions
Objective: Students will be able to describe the class and individual characteristics of bullets and cartridge cases. Do Now 1.Turn in your outline/lecture.
Firearms.
Forensic Ballistics. What is Ballistics? Ballistics is the science that deals with the _________, behavior and effect of a projectile. Ballistics is the.
Chapter 15 BALLISTICS.
 Rifling-impressing of the inner surface of a gun barrel with spiral grooves. › Imparts spin to projectile to keep it on course › No two barrels have.
Ballistics and Firearms Examination. Ballistics Slow motion bullet 1:00 (same as opening day) &feature=endscreen&v=emP5D9Klssg.
Impression Evidence Firearms Examination Tom Anderson.
BALLISTICS The big picture of ballistics Because every contact leaves a trace (Locard’s exchange principle) very hard contacts (like a 180 mps to.
1 What is ballistics? Give 3 examples of how ballistics is used in forensic science.
FIREARMS, TOOL MARKS, AND OTHER IMPRESSIONS
 Definition: any material that travels with the ability to injure  Energy is dependent on the velocity, mass, and distance traveled by projectile.
Chapter 17 Ballistics.
What are firearms?  A weapon, especially a pistol or rifle, capable of firing a projectile and using a highly flammable charge as a propellant.
Firearms, Ballistics, & Gunshot Wounds: Part I STEM.
Intro to Ballistics Forensic Science 4/28/15. Pd. 3 If you did not take the quiz yesterday, grab two yellow folders, drop off your phone, and move to.
Bullet ID Lab.  Macroscope mag 5-40X  Water tank to obtain the standards for the bullet.
Forensic Science: Fundamentals & Investigations, Chapter 17
Ballistics and Firearms
Firearms Identification. Forensic firearms examinations identification of a bullet, cartridge case, or other ammunition component as having been fired.
Firearms Identification. A discipline mainly concerned with determining whether a bullet or cartridge was fired by a particular weapon.
Cartridges Design The bullet, usually made of metal, is out front with the cartridge, holding the primer and propellant powders, behind. Change Your Life.
Firearms & Bullets.
1 What is ballistics? Give examples of how ballistics is used in forensic science.
Chapter 15 - Firearms Types of guns: 1. Handguns or pistols – These are designed to be held in one hand so they are easy to carry and conceal. Not as accurate,
Ballistics Intro to Firearms 1. Forensic Science: Fundamentals & Investigations, Chapter 17 2 Long Guns and Handguns o Long guns Rifles fire bullets Shotguns.
Question The inner surface of the barrel of a gun leaves its markings on a bullet passing through it. These markings are peculiar to each gun. Would these.
Ballistics. History of Gunpowder and Firearms The Chinese invented gunpowder over a thousand years ago using KNO 3, charcoal and sulfur. Muzzle-loading.
Firearms and Ballistics
Types of Firearms 1.Handguns (pistols) –Revolver –Semiautomatic 2.Rifles 3.Shotguns 4.Air or BB guns.
Chapter 15 FIREARMS, TOOL MARKS, AND OTHER IMPRESSIONS
FIREARMS, TOOL MARKS, AND OTHER IMPRESSIONS
Chapter 17 Ballistics By the end of this chapter you will be able to:
Ballistics.
The study of bullets and firearms
Forensic Science: Fundamentals & Investigations, Chapter 17
Ballistics By the end of this chapter you will be able to:
Firearms Identification
Firearms Identification
Firearms & Tool Marks Forensic Science.
Chapter 17 Ballistics By the end of this chapter you will be able to:
(Discussion and Continue Worksheet - Firearms)
The study of bullets and firearms
Chapter 17 Ballistics By the end of this chapter you will be able to:
Firearms, Tool Marks, and Other Impressions
BELLRINGER: What do you know?
Firearms Identification Mr. Tomasevich Forensics.
Ballistics Chapter 15.
ANALYZING FIREARMS EVIDENCE
BALLISTICS.
Bullet ID Lab
The Smoking Gun.
Ballistics practice quiz
Chapter 17 Ballistics By the end of this chapter you will be able to:
Identifying Bullets Ruben Hernanadez.
Forensic Firearm Identification, Ballistics, and Tool Marks
16-1 Bullet and Cartridge Comparison
Chapter 17 Ballistics By the end of this chapter you will be able to:
Presentation transcript:

Firearms Identification Mr. Tomasevich Forensics

Firearms Identification A discipline mainly concerned with determining whether a bullet or cartridge was fired by a particular weapon.

Barrel -A) Land B -B) Groove Bullet A -A) Land impression -B) Groove impression Rifling - the spiral grooves that are formed in A the bore of a firearm barrel. Makes projectile spin when fired. B B

Broach cutter used to create rifling impressions
in
a
 barrel.
 A
 
-Caliber
-the
diameter
of
 the
bore
of
a
rifled
firearm.
 The
caliber
is
usually
 A expressed
in
hundredths
of
an
 inch
or
millimeters.

Example
. 22
caliber
or
9mm.


Cartridge Parts and How it Works Cartridge Case Lead Bullet Primer Gun Powder

Bullet Comparison Class Characteristics Different gun manufacturers use different rifling techniques. These techniques impart the class characteristics of a bullet. -Number of lands and grooves -Width of lands and grooves -Depth of lands and grooves -Pitch -Twist

Bullet Individual Characteristics •A cross section of a gun barrel will show small grooves or striations all along the lands and grooves (machine markings) •These are created when the barrel is rifled. No two gun barrels have the exact same markings. •These markings leave unique striations or impressions on a bullet. This allows a bullet to be traced back to a particular firearm.

Bullet Individual Characteristics It is possible to determine the bullet on the left and the bullet on the right are from the same gun by matching the striations. See examples A and B

Cartridge Case Class Characteristics Manufacture ( i.e.. Winchester) Shape ( i.e.. rimless, rimmed ) Caliber ( i.e.. 45 ACP, 9mm, 12gauge) Composition ( i.e.. brass, steel, plastic)

Cartridge Case Individual Characteristics -Firing Pin Impressions -Breech Face Marks -Ejector Marks -Extractor Marks

Breech Extracting Pin Firing Pin Ejector (not shown)

Breech When a cartridge is fired, the explosion forces the bullet down the barrel and the shell casing is forced back against the breech. This leaves impressions unique to the individual gun’s breech on the shell casing.

Examples of Breech Markings

Firing Pin Marks In order to fire the cartridge, the primer must first be ignited. To accomplish this a firing pin strikes the center ring of the cartridge. This will in turn leave a distinct impression that is unique to the firing pin of that particular gun.

Firing Pin Mark Breech Marks

Extracting Pin and Ejector Marks The extracting pin and ejector throw the spent shell casing from the chamber of the gun. These leave marks on the shell casing that are unique to those parts on that particular firearm.

Shotgun identification Shotguns have smooth barrels with not rifling. Therefore there are no land or groove marks left on the bullet. Identification can still be made by comparison of extractor/ejector markings on shotgun shell.

REVIEW Define the term “Firearm Identification”. The discipline concerned with determining if a bullet or cartridge casing was fired by a particular gun.

REVIEW What is the purpose the lands and grooves that comprise the rifling in a gun barrel? The lands and grooves make the bullet spin as it exits the gun barrel. This makes the bullet fly more accurate.

REVIEW How do you determine the caliber of a gun? You measure the distance from land to land in hundredths of an inch or mm. Caliber

REVIEW What are the four parts of a cartridge?

REVIEW Pretend you recover a bullet from a crime scene. How could you determine what kind of gun fired that bullet? •The number of land and groove impressions •The distance between the land and groove impressions •The pitch and twist of the land and groove impressions.

REVIEW What type of individual characteristics can be used to match a shell casing back to an individual gun that fired it? •Firing pin impressions •Breech impressions •Extracting pin marks •Ejector marks

REVIEW What is the difference between class characteristics and individual characteristics? Class characteristics are general and can trace something back to a class or group (a type of shoe or tire). Individual characteristics can trace something back to a particular source( a particular persons shoe or a particular car).