SPT-Soft Pack Technology. Produce the best HPLC columns !

Why SPT  All Packing materials are fragile  Fines are crushed particles reduce efficiency  The packing process is Very hard on particles if not controlled  SPT allows for full control of the packing process reducing damage to the particles

From the Box to Packing in 30 min

Assembled System Ready for Packing

Why Soft Pack Technology?  Programmable pressure and flow so that sensitive material will not be damaged!  Easy to use: set the program and run.  Robust and reliable pumps that don’t break down and last for many years.  Computer control with Quick-Set software allow for quality control.  Max psi (689 bar), high pressure up to psi (1241 bar), available.  Quiet operation (electric pump).

What do customers say?  We have been using Scientific Systems Inc. column packing pumps in our day to day operation with very good success. They have proven to be reliable, easy to use, and very durable throughout the 3 years that we have been using them. I recommend them for any constant pressure column packing where a high success rate is key. Peter Hratzschmar Peter Hratzschmar LC/MS Service Specialist LC/MS Service Specialist Michrom Bioresources Inc. Michrom Bioresources Inc.

Complete Control of the Pump  Fast or Pressure limited ramps  Ramp speed adjustments  Packing pressure  Packing Flow  Upper and lower pressure limits  Solenoid valve

Multi Step Packing is Easy  Allows control of –Pressure –Flow –Packing time  Using the valve trigger and a solenoid valve allows different solvents to be used during the packing process

Setting up Graphing and Data Collection  Lets you see what is happening  Allows on the fly changes during the development phase as you see the profile

Saving Packing Data  Allows each column packing conditions to be stored  Allows storage of flow and pressure profile of each column packed  Better control of your packing process

Packing The Column  To run program click on pump or if program is loaded click on Start

Initial Packing Profile  Check the rate of packing  Look for abnormal profiles  Save the graph if desired  Compare profiles lot to lot

Running a Column Packing Profile  See when the bed is stable  Verify that all pressure/flow conditions have been met  Improve your QC

Save Your Protocols  Each column method can be saved  Great for multiple locations where columns are packed  Transfer from R&D to production is just a file transfer

No Air & Full Control  Save packing results from each column  Save each packing protocol  Control pressure flow and rate of packing by time  Control a solvent valve by time  Speed up your packing development by seeing what is happening