Day 1 Sritrusta Sukaridhoto
UTP 5e cable/patch
Straight-through
Crossed-over
Tools
Step-by-step (1) Skin off the jacket Un-twist each pair Place the order Recheck use diagram
Step-by-step (2) Hold the grouped Cut straight all of the wires
Step-by-step (3) Insert the wires into connector (pin facing up)
Step-by-step (4) Push moderately hard to assure that all of the wires have reached the end of the connector
Step-by-step (5) Place the connector into crimp tool, and squeeze hard so that the handle reaches it’s full swing
Step-by-step (6) Now go and test it !
Wire map
Cisco Cable system
X21
V35
RS232
Connecting Router to ISP (WAN)
Console Cable Plug it into console port
Plug Console Cable Serial Cable into Computer at Serial Port UTP Cable into Console Port at Router
Plug the FO
Prepare the FO Cable Plug it into Router and Switch
Dial-UP
Plug Modem into PC using Serial Cable Plug RJ11 Cable into modem and PABX Use Adaptor as AC-power
How-to Dial UP Use Gnome-ppp (Linux), Dialup networking (Windows) Username : goodle Password : goodle Number to dial : 101
Wireless-LAN
Turn-on WIFI Get ESSID : “eepishotspot” Get IP Access Internet