1 Getting Started with the Phone When this module is complete, you will be able to: Set up an IP phone manually and register it to the PBX default configuration. Reset the phone to factory defaults. Reinitialize the phone. Estimated time: 50 minutes.

2 How the Phone Gets its IP Address

3 Configuring Static IP Addresses for the Phones

4 Static IP Address from the GUI For DHCP environments

5 Static IP Address from the TUI For non-DHCP environments See Exercise 12 in your lab book for complete exercise.

6 Registering an Extension Using the Logon Wizard See Exercise 13 in your lab book for complete exercise. 1. Press any key. 2. Enter 40 and the password you created. 3. Enter the IP address of your laptop. 4. Enter the SIP password of the extension.

7 The “Registration” Symbol A solid phone icon indicates that the phone is registered.

8 Verify the Phone is Registered

9 Finding the IP Address of the Phone If the phone gets an IP address, the ? will display it. See Exercise 14 in your lab book for complete exercise.

10 Registering an extension manually Via HTTP See Exercise 15 in your lab book for complete exercise.

11 Navigating the Voic

12 Setting up and Using Voic 1.Record Your Name 2.Record a Personal Welcome Message 3.Creating Personal Greetings 4.Change Your PIN See Exercise 16 in your lab book for complete exercise.

13 Phone GUI Access the phone GUI by entering the phone’s IP address into a web browser:

14 Up to 12 Identities

15 System Information

16 Resetting to Factory Defaults

17 SIP Trace

18 PCAP Trace

19 Resetting the Phone Clears all previous extensions, settings, and passwords. See Exercise 17 in your lab book for other phone models. snom 300 and 320: 1.Use the bottom edge of the navigation wheel () to navigate to Configuration. (Press the  key ten times.) 2.Press the right edge () of the wheel once. You should see Reset. 3.Press the confirm key. 4.Enter the password (default is 0000).

20 Reinitializing the Phone Useful when: You’re locked out of the phone You don’t have the right password The phone is acting strangely or unpredictable You can’t get the phone working

21 Flashing the Phone: A Two-Part Process Part 1. Download the recovery image. See Exercise 18, Parts 1 and 2, in your lab book for complete exercise. Part 2. Configure the phone to fetch the image.

22 TFTP Logging If flashing the phone does not work, use FTP logging to troubleshoot: See Exercise 18, Part 3, in your lab book for complete exercise.