DOF-ENERGY software First version (1.0) of the DOF- ENERGY software was released on july 2000 based on EN 832 standard. Latest version (1.2) was updated.

Slides:

Advertisements

Similar presentations

Chen Xin (Vivian). Energy Consumption by Sectors.

Advertisements

HWg-PDMS: New software Poseidon & Damocles Monitoring System 1 Included on every HWg DVD since September 2009.

Tas seminar/demonstration on Part L 2006 of the Building Regulations Presented by Alan Jones EDSL February

Inventory Management Software. Inventory Software is absolutely compatible and competent application to deal with inventory management of several commercial.

Summary of Heat Loss Calculations Assessing overall heating requirements for building (E) Component U-ValueAreaHeat Loss Rate (W o C -1 ) Walls U walls.

December 10, 2007 Multi-family Residential Unit Audits - Garden Apts and Smaller housing stocks1 Multi-Family Residential Unit Audits Garden Apartments.

Solving Automation Reporting Problems with Dream Report Renee Sikes Applications Engineer Dream Report Brand Manager.

Querying a Database Using the Select Query Window

Integrating a Saving Energy controller in Existing Air Condition units Case Study.

1 S HORT METHODOLOGIES FOR IN - SITU ASSESSMENT OF THE INTRINSIC THERMAL PERFORMANCE OF THE BUILDING ENVELOPE Rémi BOUCHIE, CSTB Pierre BOISSON, Simon.

Energy use in buildings Dr. Atila Novoselac Associate Professor Department of Civil, Architectural and Environmental Engineering, ECJ

CHANGES IN THERMAL ENERGY CONSUMPTION IN APARTMENT BUILDINGS OF ESTONIA Teet-Andrus Kõiv,

Committing to the future easyEmission – step 2 Software set-up for Engine Testing.

Lecture Objectives: Finish wit introduction of HVAC Systems Introduce major ES software.

Page 1 ISMT E-120 Introduction to Microsoft Access & Relational Databases The Influence of Software and Hardware Technologies on Business Productivity.

HVAC523 Heat Gain. Heat First law of thermal dynamics states that HEAT TRAVELS FROM HOT TO COLD. 95 degree outside air will flow through the building.

Czech Technical University in Prague Faculty of Civil Engineering Department of Microenvironmental and Building Services Engineering Czech Technical University.

SPF-calculation methods in Finland IEA annex 39 meeting in Tokyo Jussi Hirvonen Finnish Heat Pump Association SULPU ry.

Towards Net Zero Energy Buildings: Dynamic Simulation of office Building in Three Climate Zones of Europe Nusrat Jung 1,2, Jari Shemeikka 1, Risto Lahdelma.

Calculation of Energy Performance of Buildings - Lithuanian Case. Dr

Performance of SolarWalls in Minnesota

Energy year 2013 District Heat Wilhelms District heat in Finland year 2013  Heat sales (incl. taxes) 2,31 mrd €  Sold heat energy31,7 TWh.

Committing to the future easyEmission - Testing Module for Engines.

Energy use in buildings Dr. Atila Novoselac Associate Professor Department of Civil, Architectural and Environmental Engineering, ECJ

Non-Residential Network Computer Power Management UES Measure Update Regional Technical Forum July 16, 2013.

ENERGY MANAGEMENT. A combined design and management function which embraces the disciplines of engineering mathematics accounting operations research.

1 WinSLT  the software solution for calculating the heat transfer by radiation divided into transmission, refelction and absorption.

DOF-THERM software First version (1.0) of DOF-THERM was released in Latest version 2.1 is available in Finnish, English, Swedish, French and German.

Installing SIGNZ on a stand- alone machine. These slides will guide you through the installation of the SIGNZ ‘server’ and ‘client’ components on one machine.

University Of Palestine. Department of Information Technology.

2006 Adobe Systems Incorporated. All Rights Reserved. Designing & Building Structured Business Reports with ColdFusion MX 7 Adam Lehman ColdFusion Specialist.

Florida Public Hurricane Loss Model - v5.0 ( Computer Science ) Dr. Shu-Ching Chen School of Computing and Information Sciences Florida International University.

Conifer Cast New features Windows Vista Compatibility New Installer Solver Pause/Resume Locally Implicit Advection Split Lagrangian VOF Advection.

ICT development office ICT research, planning and training dept. Network development and administration dept. System development and operation dept. President.

 On average, home heating uses more energy than any other system in a home  About 45% of total energy use  More than half of homes use natural gas.

HVACR416 - Design Heat Loss / Heat Gain Part 1. Why? The primary function of Air Conditioning is to maintain conditions that are… o Conductive to human.

0 Load Calculation Manual Output : 1. Screen Outputs (Results, Pareto Chart, Hourly Estimation) 2. Optional Outputs (*CLTD.txt, *TETD.txt) 3.

Heat Treatment Calculator (H.T.C) Sham Kashyap Computing and Information Sciences Kansas State University.

Energy conservation strategies Buildings energy consumption depends on building envelop, efficiency of HVAC and lighting systems, amount of required fresh.

SIMSWeb “Internet Remote Access” The most advanced central station software in the universe !

Group 4B: Bergold, Kajander, Leppä, Niemeläinen, Pesonen.

Energy Design of Buildings using Thermal Mass Cement Association of Canada July 2006.

© Oxford University Press 2011 IP1.9.5 Solar panels and payback time: Overview Solar panels and payback time: Overview.

 On average, home heating uses more energy than any other system in a home  About 45% of total energy use  More than half of homes use natural gas.

Energy Consumption Calculations Group 4a. Contents 1.Introduction 2.Methods 3.Tools 4.Country specific variations a.Finland b.Other Nordic countries c.Italy.

The magic of metering Save energy, save money and save the environment.

Energy year 2014 District Heat.

Session 14 & 15 Lab Exercises. Assessing and working with data in the model – Instructor’s presentation What are the top five areas of focus for applying.

Advanced Energy Engineering Technology Modeling Building Energy Systems Session 6: Building site and envelope.

Taina Wilhelms Energy year 2011 District Heat.

Lecture Objectives: Differences in Conduction Calculation in Various Energy Simulation Programs Modeling of HVAC Systems.

Overhaul design and energy study of the library of the Faculty of Civil Engineering and Architecture building Cano Catala, Javier Frias Palenzuela, Ricardo.

Environmental house project Jack Bradley. What will be covered in this lecture? (1) Why people need a house (2) How technology provides a house (3) Design.

PRELIMINARY DRAFT EXCERPT RECOMMENDATIONS ON MEASUREMENT AND VERIFICATION METHODS IN THE FRAMEWORK OF DIRECTIVE 2006/32/EC ON ENERGY END-USE EFFICIENCY.

Heat energy is measured in units called joules or calories. 1 calorie is the amount of heat energy needed to raise the temperature of 1.0 g (mL) of water.

How To Make The Backup Of AVG Antivirus 2017 Definitions.

Heat transfer Steady state conditions not for dynamic systems in buildings through walls, roofs, floors, windows, doors building structures and U-values.

Energy Efficiency in Jamaica’s Building Code:

InstalSystem 5.

Energy year 2015 District Heat.

Specifics of multi-apartment building deep complex retrofitting

Lecture Objectives: Discuss Final Project

Service Section Technical Training Dec 2005.

3E Plus Program Software Insulation Thickness Calculator

Conduction Cooling Loads

Lecture Objectives: Discuss accuracy of energy simulation and Introduce advance simulation tools Review the course topics Do the Course and Instructor.

Welcome to Norton Antivirus Customer Support. Norton 24/7 Online Tech Support.

Company Overview.

Lecture Objectives Learn about Cooling Load Calculation

D3.1 Accessibility Statement Generator

Presentation transcript:

DOF-ENERGY software First version (1.0) of the DOF- ENERGY software was released on july 2000 based on EN 832 standard. Latest version (1.2) was updated according EN standard. Language: Finnish or English DOF-ENERGY provides easy way to evaluate energy consumption and heat loss distribution of the buildings. There are more than 100 different printout that you can produce with the software. DOF-ENERGY is pure stand alone program. It does not require any third party software, but it can use DOF- THERM if it is available. DOF-ENERGY can be used in windows 95, 98, 2000, NT and XP. Downloading/updating/installing the software can be done from internet. Software can be tested freely (in DEMO-mode). In Finland there are more that 1500 registered users of DOF-THERM and DOF-ENERGY softwares. D.O.F. tech 001

Structure of DOF-ENERGY software Temperature databases DOF-ENERGY engine Solar radiation databases Structural databases Electrical equipment databases Wizard templates External ASCII databases for national localisation: Language databases Ventilation databases Online help quidance (requirements, table values…) D.O.F. tech 001

External and internal temperatures Monthly temperatures can be manually inserted or imported from database. Each calculation model can include unlimited amount of temperature groups. D.O.F. tech 001

Solar radiation Solar radiation can be manually inserted or imported from database. Each calculation model can include unlimited amount of radiation groups. D.O.F. tech 001

Heated and unheated space(s) Each calculation model can include unlimited amount of heated and unheated spaces. Most of the space parameters are nationally defined table values (like ventilation system values and heat capacity values). These values can be found in nationally defined online help files. D.O.F. tech 001

Envelope items Each space can include unlimited amount of envelope items (walls, roofs and so on). User can define envelope items properties manually or pick the values from structural databases. User can also use the DOF-THERM software to calculate actual U-value for the item. D.O.F. tech 001

Each space can include unlimited amount of ventilation items, heated water items and electrical equipment items. Electrical equipments enables the comparisation of real energy consumption and calculated energy consumption Ventilation, heated water and electrical equipments D.O.F. tech 001

Fast modelling: Wizard templates With wizard templates the calculation model can be generated rapidly. Even the user can create new templates to the database, this saves time when same base model is used again D.O.F. tech 001

RESULTS: Heat loss coefficient This report is usefull if the national design criteria is the averaged heat loss coefficient. All results are updated after any changement done in calculation model. D.O.F. tech 001

RESULTS: Energy use D.O.F. tech 001

RESULTS: Other results D.O.F. tech 001