The New Adventurer Pro Is Here!

What’s New? Bright alphanumeric dual line display Better weighing cell and weighing performance 7 application modes Better Look! The Ohaus Adventurer Pro

Introducing the Adventurer Pro Precision Balance: 7 Models From 51g x.001g to 8100g x 0.1g NTEP Approved Models Available (release date TBD) 7 Application Modes Standard internal RS232 Port 2 nd RS232 Port Factory Option Density/Specific Gravity Determination with Below Balance Hook Battery with Auto Shut-off or AC Power (Power Pack Included) Built-In GMP/GLP capability Integral Security Bracket In-Use Cover Included! The Ohaus Adventurer Pro

Adventurer Pro Vs. Competition The Ohaus Adventurer Pro

What’s New? Better Look! The Ohaus Adventurer Pro

What’s New? More Models -- New 51g X 0.001g model New 210g, 410g, 810g X 0.01g models New 2100g, 8100g X 0.1g models More Application Modes -- New Percentage Mode -- Shows sample as % of reference weight New Totalization Mode -- Allows summation of sample weights New Display Hold Mode -- Holds last stable weight on display after sample is removed New Check Weighing Mode – Verifies a predetermined weight within prescribed limits New Animal Weighing Mode – Compensates dynamic effects from the load to provide a stable indication The Ohaus Adventurer Pro

What’s New? More Weighing Units -- Baht, Tola, User Programmable Custom Unit In-Use Cover Included with Each Balance The Ohaus Adventurer Pro mg, g, kg, oz, lb, ct, dwt, oz t, GN, N, Taels(3), Momme, Tical, Baht, Marshal, Tola, Custom

What’s New? RS232 Communication Port is Now Standard – Secondary RS232 interface is a new factory installed option that allows connection to multiple peripherals expanding versatility GLP/GMP Data Is Built in – Complete GLP/GMP capabilities include date, time, balance ID, user ID, project ID and reference The Ohaus Adventurer Pro

What’s New? Easy To View Backlit Display – 2-line alphanumeric LCD with text prompts Brilliant backlight Display allows simultaneous viewing of reference and actual weight. The Ohaus Adventurer Pro

What’s New? Batteries for Portability -- 4 “AA” Batteries for portable power Leveling Feet -- For quick set-up, 4-corner leveling feet system is standard on all Adventurer Pro’s AC or Batteries The Ohaus Adventurer Pro Leveling Feet

What’s Else? Integrated Security Bracket -- Adventurer Pro has an integral security bracket as standard equipment Integral Weigh-Below Hook -- Adventurer Pro has a built-in weigh-below hook which cannot be lost Weigh-Below Hook The Ohaus Adventurer Pro Security Lock

What’s New? Recap Better Look Models -- More New Models Applications -- More Applications Units -- More Weighing Units RS232 Terminal is Standard, 2 nd Terminal is a Factory Option Display – Brilliant Backlit LCD / 2-Line Alphanumeric LCD Battery -- Better Battery Performance Standard In-use Cover GMP/GLP Output Integral Weigh-Below Hook The Ohaus Adventurer Pro

Enhanced Mode : Parts Counting APW Enhancement -- The Adventurer Pro allows the user to turn-on automatic recalculation of the average piece weight (APW Optimization) -- this is the same function as found in Trooper Count and Ranger Count Without Optimization, the APW is the average of the weight of the sample, divided by the number of pieces in the sample -- if the user needs a sample of 100, they have to count by hand 100 pieces! With Optimization, the APW is the average of the weight of the initial sample as well as any subsequent samples -- the user can reach a sample of 100 by adding parts on the pan 10 at a time, increasing accuracy! The Ohaus Adventurer Pro

Enhanced Mode : Parts Counting APW Enhancement -- APW Enhancement is turned-on in the MODE-COUNT Menu by setting “APWOPT” to on The Adventurer Pro will recalculate the APW as long as two criteria are met: The weight of the new sample is less than or equal to the weight currently on the pan -- if it is more, the Adventurer Pro will not perform an APW recalculation The weight and platform are stable Sample Sizes -- The Adventurer Pro allows the user to change the sample size with a press of the Print/Unit button The Ohaus Adventurer Pro

Enhanced Mode: Parts Counting This mode is enabled by turning-on “COUNT" in the MODE Menu To use mode: Press and hold Function button until “COUNT” is displayed on line 2 of LCD Display will then flash “CLEAR APW?” Press No button to use stored APW and begin parts counting Press Yes button to establish a new APW Balance will display weight and flash “PLACE 10” To select a different sample size, press No button Place specified pieces on pan and press Function button to accept Balance will calculate APW, then display total pieces and total weight To view APW, press Function button (APW will momentarily appear on line 2 of LCD) To reset APW, press and hold Function button until “COUNT” is displayed again The Ohaus Adventurer Pro

New Mode: Percentage Weighing This mode allows the user to display the weight of a sample as a percentage of a reference weight The reference weight is placed on the pan first, and equals 100% Each reference weight will be a percentage from 1% to x%, depending on the Capacity X Readability of the scale -- most users will use 1% to 200% at the most Applications: Formulation and compounding, weight checking The Ohaus Adventurer Pro

New Mode: Percentage Weighing This mode is enabled by turning-on “PERCENT” in the MODE Menu To use mode: Press and hold Function button until “PERCENT” is displayed on line 2 of LCD Display will then flash “CLEAR REF?” Press No button to use stored reference and begin percentage weighing Press Yes button to establish a new 100% reference Balance will display weight and alternate between “PERCENT” & “PUT SAMPLE” Place reference weight on pan and press Function button to accept Balance will calculate and display 100% and total weight To view 100% reference weight, press Function button (reference weight will momentarily appear on line 2 of LCD) To reset 100%, press and hold Function button until “PERCENT” is displayed again

The Ohaus Adventurer Pro New Mode: Check Weighing This mode allows the user to check the weight of a sample against a preset target Under and Over values are entered manually The display automatically displays “UndEr”, “ACCEPt”, “OVEr” and total weight of sample Applications: Quality control, weight checking

The Ohaus Adventurer Pro New Mode: Check Weighing This mode is enabled by turning-on “CHECKWEIGH” in the MODE Menu To use mode: Press and hold Function button until “ CHECKWEIGH ” is displayed on line 2 of LCD Display will then alternate between “ CHECKWEIGH ” and EDIT REF?” Press No button to use stored values and begin check weighing Press Yes button to establish a new “ UndEr” value Use No button to change flashing digit Use Yes button to accept and advance to next digit Use Yes button accept entered value (flashing) Press Yes button to establish a new “ OVEr” value Use No button to change flashing digit Use Yes button to accept and advance to next digit Use Yes button accept entered value (flashing) To reset values, press and hold Function button until “ CHECKWEIGH ” is displayed again

The Ohaus Adventurer Pro New Mode: Animal (Dynamic) Weighing This mode allows the user to weigh small animals and filters out animal movements This mode provides the user with 3 operating modes: Automatic, Semi-Automatic and Manual. This mode provides the user with 3 filter levels: 5, 10 & 15 seconds Animal/Dynamic weighing can work with most weighing units The Adventurer Pro will display the filtered value on line 1 of LCD and alternate between “ANIMAL” and “HOLD” on line 2 of LCD Applications: Vibration filtering, research, drug testing

The Ohaus Adventurer Pro New Mode: Animal (Dynamic) Weighing This mode is enabled by turning-on “ANIMAL” in the MODE Menu Either manual, semi-automatic or automatic modes can be selected by setting “AnIMAL” to “MANUAL”, “SEMI” or “AUTO” Filter levels can be selected by setting “LEVEL” to “SET 5 SEC”, “SET 10 SEC” or “SET 15 SEC” To use mode (set to “MANUAL”): Press and hold Function button until “ANIMAL” is displayed on line 2 of LCD Display will alternate between “ANIMAL” and “READY” Place animal on the pan and press Function button take a measurement Balance will display filtered value on line 1 and alternate between “ANIMAL” and “HOLD” on line 2 of LCD Remove load from pan and press Function button to clear filtered value

The Ohaus Adventurer Pro New Mode: Animal (Dynamic) Weighing To use mode (set to “SEMI”): Press and hold Function button until “ANIMAL” is displayed on line 2 of LCD Display will alternate between “ANIMAL” and “READY” Place animal on the pan Balance will automatically begin measurement Balance will display filtered value on line 1 and alternate between “ANIMAL” and “HOLD” on line 2 of LCD Remove load from pan and press Function button to clear filtered value

The Ohaus Adventurer Pro New Mode: Animal (Dynamic) Weighing To use mode (set to “AUTO”): Press and hold Function button until “ANIMAL” is displayed on line 2 of LCD Display will alternate between “ANIMAL” and “READY” Place animal on the pan Balance will automatically begin measurement Balance will display filtered value on line 1 and alternate between “ANIMAL” and “HOLD” on line 2 of LCD Remove load from pan Balance will automatically clear filtered value

New Mode: Totalization This mode allows the user to sum a series of weights -- up to the limit of the display Weights can be added (totalized) either manually or automatically Totalization can work with most weighing units Once you are in Totalization, you can change weighing units without exiting Totalization The Adventurer Pro will show the current weight on the pan on line 1 of the LCD and alternate between “TOTALIZE” and totalized weight on line 2 of LCD Applications: Formulation and compounding, parts kitting Σ Totalization The Ohaus Adventurer Pro

Σ Totalization The Ohaus Adventurer Pro New Mode: Totalization This mode is enabled by turning-on “TOTALIZE” in the MODE Menu Either manual or automatic totalization can be selected by setting “tOtAL” to “AUTO” or “MANUAL” To use mode (set to “MANUAL”): Press and hold Function button until “TOTALIZE” is displayed on line 2 of LCD Display will alternate between “TOTALIZE” and zero weight (no measurement stored to memory) Place a weight on the pan and allow balance to stabilize Press Function button to add the weight to the total Remove weight from pan and continue as desired or until display limits are exceeded To change weighing unit, press and hold Unit button To clear total, press and hold Function button until “TOTALIZE” is displayed again

Σ Totalization The Ohaus Adventurer Pro New Mode: Totalization To use mode (set to “AUTO”): Press and hold Function button until “TOTALIZE” is displayed on line 2 of LCD Display will alternate between “TOTALIZE” and zero weight (no measurement stored to memory) Place a weight on the pan Upon stabilization, weight will flash and be automatically added to the total Remove weight from pan and continue as desired or until display limits are exceeded To change weighing unit, press and hold Unit button To clear total, press and hold Function button until “TOTALIZE” is displayed again

New Mode: Display Hold This mode allows the user to hold the highest stable weight on the display until cleared The mode provides the user with 3 operating modes: Automatic, Semi-Automatic and Manual. Display Hold can work with most weighing units The Adventurer Pro will display the current hold value on line 1 of LCD and “HOLD” on line 2 of LCD Applications: Postal and shipping 0.00  Display Hold The Ohaus Adventurer Pro

New Mode: Display Hold This mode is enabled by turning-on “HOLD” in the MODE Menu Either manual, semi-automatic or automatic modes can be selected by setting “HoLd” to “MANUAL”, “SEMI” or “AUTO” To use mode (set to “MANUAL”): Press and hold Function button until “HOLD” is displayed on line 2 of LCD Display will then flash “READY” Place a load on the pan and press Function button take a measurement Balance will display hold value on line 1 and “HOLD” on line 2 of LCD Remove load from pan and press Function button to clear hold value 0.00  Display Hold The Ohaus Adventurer Pro

0.00  Display Hold The Ohaus Adventurer Pro New Mode: Display Hold To use mode (set to “SEMI”): Press and hold Function button until “HOLD” is displayed on line 2 of LCD Display will then flash “READY” Place a load on the pan Balance will automatically take a measurement and display hold value on line 1 and “HOLD” on line 2 of LCD Remove load from pan and press Function button to clear hold value To use mode (set to “AUTO”): Press and hold Function button until “HOLD” is displayed on line 2 of LCD Display will then flash “READY” Place a load on the pan Balance will automatically take a measurement and display hold value on line 1 and “HOLD” on line 2 of LCD Remove load from pan balance automatically clears hold value

Mode Recap: New Check Weighing Mode New Animal Weighing Mode New Percentage Mode New Totalization Mode New Display Hold Mode Parts Counting Enhanced 0.00  Display Hold Σ Totalization The Ohaus Adventurer Pro