1 NS1000 V3.0 - CLIP Modification - Rev1.1 Aug 6, 2013

2 Table of Contents 1. Overview of this section 2. Function 3. How to program

3 Chapter 1 Overview

4 1. Overview Automatic CLIP handling for productivity (smooth connectivity) Solution CLIP Modification for call over QSIG network Features and Benefits >> Each extension can have 8 CLIPs then automatically select suitable one for each carrier in making a call. * Features New for V3 When a PBX receives a call via QSIG, the PBX modifies received CLIP for call back. This feature is suite when system located other country connected by QSIG 8 CLIPs for each Extension

5 Chapter 2 Function

CLIP Modification for call over QSIG network PSTN / ITSP QSIG/E&M Subscriber in Country B CLIP Country A (+810) Country B (+820) EXT201 CLIP in Call Log CLIP in Call Log PSTN /ITSP EXT101 CLIP Modification (for a call via QSIG) When a PBX receives a call via QSIG, this PBX modifies received CLIP to enable to call back. This feature is suite when this QSIG connection is international (CLIP ID) Edit CLIP ID CLIP Edit CLIP ID New! From V3 Call Back For Oversea Call Need “001” (CLIP ID) QSIG/E&M No CLIP Modification at relay point PBX

CLIP-ID for each extension Different CLIP for local call at each NS location Carrier A (CLIPA) Carrier A (CLIPA) CLIP1: …. CLIP8: Ext1002 User can use different CLIP-ID for different carrier for different carrier PBX Carrier H ( CLIPH ) Carrier H ( CLIPH ) Each Extension can have 8 CLIPs. Condition 1)Each Extension/PS can have Max. 8 different CLIPs. 2) While ARS is not available, always CLIP-1 will be sent. 3) CLIP Table Number is assigned for each carrier in ARS...

8 Chapter 3 Programing

9 CLIP Modification for call over QSIG network

CLIP Modification for call over QSIG network Others, SIP GW(TDE) (Unknown) ISDN/IPGW (Except Unknown) SIP GW (International) Delete + Edit by total digits Edit by Carrier Provided Information Edit by Leading digits Modified CLIP to call back CLIP Modification flow 1 st digit = ‘+’ ? remove ‘+’ then set as “International” otherwise set as “Unknown” Edit by the logic programmed in Caller ID Modification (Length of digits) Edit by the logic programmed in Caller ID Modification (CLIP) Edit by the logic programmed in Caller ID Modification (Leading digits) BRI(CO),PRI(CO), QSIG CLIP Modification when PBX received a call (General) E1, T1, SIP Analog CO SIP-GW/TDA50 (Unknown) Modify by number of digits *1:setting in TDA5450/not by System *2:modificationfor International call only

CLIP Modification for call over QSIG network Programming 1/4 Step1: specify modification table # for each TRG Step2: define modification logic by total digits of CLIP ID Step3: define modification logic by carrier provided information Step4: define modification logic by leading digits Step1: specify modification table # for each TRG TRG Settings – Caller ID Modification Table Set corresponding Table# for each TRG Programming at PBX#1 and final destination PBX are done by same way.

12 Step1: specify modification table # for each TRG Step2: define modification logic by total digits of CLIP ID Step3: define modification logic by carrier provided information Step4: define modification logic by leading digits Programming 2/4 Step2: define modification logic by total digits of CLIP ID Caller ID Modification – Length of Digits 3-1.CLIP Modification for call over QSIG network Select Table# CLIP + Modified CLIP Additional digit If the provided dial digits match this table, modify the digits otherwise does not modify Note: 12 digits as International 8 digits as National call as default add

13 Step1: specify modification table # for each TRG Step2: define modification logic by total digits of CLIP ID Step3: define modification logic by carrier provided information Step4: define modification logic by leading digits Programming 3/4 Step3: define modification logic by carrier provided information Caller ID Modification – CLIP 3-1.CLIP Modification for call over QSIG network Select Table# CLIP + Modified CLIP Additional digit CLIP remove add If Carrier provides these info, modify this table Modified CLIP at step2

14 Step1: specify modification table # for each TRG Step2: define modification logic by total digits of CLIP ID Step3: define modification logic by carrier provided information Step4: define modification logic by leading digits Programming 4/4 Step4: define modification logic by leading digits Caller ID Modification – Leading Digits 3-1.CLIP Modification for call over QSIG network Select Table# CLIP remove add CLIP+ Final CLIP ID Leading digits List At here Searching Leading digit to find corresponding logic to edit. (No match, no modify.) Additional digit Modified CLIP at step It is necessary to add “011” here to avoid international number become “1011XXXXXXXXX”.

CLIP Modification for call over QSIG network Example Note: Step2 and step3 set up, are not used in this example. Only step4 is used Sample1: Received CLIP with Long Distance digits, but PSTN does not need to dial. Leading digit Match “001820” Remove 1 st 6 digits add no dial CLIP from QSIG: Modified CLIP: Sample2: Different prefix for international digits is required. Leading digit Match “001” Remove 1 st 3 digits add “010” CLIP from QSIG: Modified CLIP: CIP Modification Table

16 More than 2 CLIP for EXT

17 Programming 1/2 – set max 8 CLIPs for each extension 3-2. More than 2 CLIP for EXT CLIP ID Table (4.2.5 for PS) Extension Settings – [CLIP] Note: When modify CLIP1, then CLIP data on Extension will be changed automatically Set CLIP for each extension (CLIP1 – CLIP8)

Carrier – [Carrier] Set CLIP Table No. (1-8) Programming 2/2 – set relation between Carrier and CLIP Table 3-2. More than 2 CLIP for EXT When 20 th digit of Carrier Name is ‘X’, Itemized Code is sent out as CLIP. (Higher priority than Clip table) Extension Settings – [Option1] ARS feature must be set

19 END

20 Modification NS1000 V3.0 CLIP Modification_Rev1.0_30 Jul2013.pptx - 1 st release NS1000 V3.0 CLIP Modification_Rev1.1_06 Aug2013.pptx - Delete 010 from P6 between PBX1 and PBX2