MTX TERMINALS Cinterion WM embedded. Matrix Electronica, SL Oct 2011

PRELIMINARY Matrix Electronica has experience since 2002 distributing GSM/GPRS modules for M2M market SONYERICSSON AWARDS WAVECOM TELIT SIEMENS CINTERION AWARDS More than 400 customers, 72 are key customers

Project Overview Matrix Electronica has design and developed following modem terminals GSM/GPRS – UMTS/HSDPA for M2M market MTX-65i. GSM/GPRS terminal with I/O expansion and JAVA embeded applications MTX-65+G. Combi GPS + GSM/GPRS with JAVA embedded application MTX-65-ULP Ultra Low Power mode (2,5uA “sleep”) MTX-H25+PLUS. HSDPA terminal (UMTS – 3G+) MTX-HSDPA-EU3. HSDPA MTX-HSPA-PH8+G. HSPA terminal MTX-IND Industrial Featured terminal

COMMON Mechanical & Electrical Specifications Enclosure dimensions 78,1 x 66,8 x 37,2 mm ; 2 Mounting holes SIM Card Holder Audio input 6p4c-pin RJ12 connector, can use Handset RJ9. Power connector 6-pin RJ12 connector Wide range power supply: 6 to 32Vdc RF antenna connector: FME-M USB port: MINI-USB (type B) connector. ONLY MTX-65i / MTX-65ULP RS232 Data connector (Standard DB9-F) I/O connector in HD DB15: SPI/I2C--I/O-SECOND RS232 MTX-65+G: RS232 and I/O + SPI/I2C in a HD DB15 connector GPS antenna connector: SMA F

MTX-63i & MTX-65i MTX-65i. GSM Quad Band with 2 serial RS232 & USB I/O expansion JAVA embedded applications Cinterion TC65i inside

MTX-65i layout 99% SMD TECHNOLOGY COMMON & EASY TO FIND & USE CONNECTORS I/O DB15 Mini USB RS232 DB9 Audio ANT FME POWER

MTX-65i Mechanical & Electrical Specs

MTX-65i Mechanical & Electrical Specs

MTX-65i Expansion - I/O DB15 Connector Pin out I2C bus or SPI bus (for Memory , displays, keyboard…) 2 wires RS232 Second UART 4 General Input/Outputs 2 Analog Input (ADC) 1 Analog Output (DAC) - PWM VEXT Output

TC65i Device Features Quad Band GSM /GPRS GPRS data transmission: GSM 850, E-GSM 900, DCS 1800, PCS 1900 Class 4 (2 W) for GSM850 & EGSM900 Class 1 (1 W) for GSM1800 & GSM1900 Control via AT commands TC65i Power consumption: Power down 60 uA Sleep mode (registered DRX=5) 17 mA Speech mode (average) 250 mA GPRS class 12 [Power reduction = 6dB] (average) 480 mA Temperature range Operation: -30°C to +75°C Switch off: +80°C Storage: -40°C to +85°C Weight: < 190 g GPRS data transmission: GPRS class 12 Mobile station class B Coding schemes CS 1-4 CSD data transmission: USSD support GSM Supplementary Services Specification for SMS: Point-to-point MO and MT SMS cell broadcast Text and PDU mode Specification for fax: Group 3, class 1, 2 Specification for voice: Triple-rate codec HR, FR, & EFR Adaptive multi-rate AMR Basic hands-free operation Echo cancellation Noise reduction

MTX-65 i, 65+G, 65-ULP & IND Java Embedded Applications Allow save external hosts processor, space, power consumption… Open application resources: ARM© Core, Blackfin© DSP Memory: 400 KB (RAM) and 1.7 MB (Flash) Improved power-saving modes Java™ features: J2ME™ profile IMP-NG Over-the-air update: Application SW: OTAP Firmware: FOTA FREE SDK Software Development kit

MTX-65ULP (Ultra Low Power) Ultra Low Power means that GSM module is switched off. Only an internal RTC is powered (battery operated, do not need power supply). ULP Power consumption 2.5uA Typical Can be waked-up by programmed alarm or interrupt inputs (4) . Typical application is remote battery operated metering JAVA embedded applications Same aspect as MTX-65 TC65 & TC65i inside

MTX-65+G-V3 COMBO Module inside Cinterion XT65 *GSM: Quadband GSM-GPRS Class 12. *GPS: Antaris chipset. 16 Channels Integrated TCP-IP stack JAVA embedded applications Interfaces: 1 RS232 serial port (4 wires) 4 Input/Outputs 2 Analog Inputs I2C or SPI port Automatic Restart after shutdown. Inputs/Output optoislolated (3+3)

MTX-65+G-V3 Aspect

MTX-65+G-V3 Aspect

MTX-65+G V3 Main & Expansion I/O Connector I2C bus or SPI bus 4 wires RS232 main UART 4 General Input/Outputs 2 Analog Input (ADC) 6. I2CDAT- SPIDO 11. IO 2 2. RD0 7. RTS 12. IO 4 3. TD0 8. CTS 13. SPIDI 4. IO 1 9. ADC 2 14. GND 5. IO 3 10. SPICS 15. ADC 1

MTX-65+G-V3: Specification for GPS Receiver 16 channel, L1 1575.42 MHz Accuracy Position: 2.5 m CEP; 5.0 m SEP Position with DGPS/SBAS: 2.0 m CEP; 3.0 m SEP GPS dedicated AT commands Support of SBAS (WAAS/EGNOS) data GPS active antenna supply: 3.0 V A-GPS enabled Tracking sensitivity: -157 dBm (with external antenna) Date WGS-84 Start-up Time Hot start: < 3.5 s Warm start: 33 s Cold start: 34 s Protocols: NMEA-0183 V2.3, RTCM protocol V2.2, UBX binary protocol

NEW MTX-65+G-V5+B Added FUTURE MTX-65+G-V6 Hardware watchdog Accelerometer (can be used to wake-up terminal) EEPROM 1Mb Internal BATTERY 1600mA/h FUTURE MTX-65+G-V6 Same as V5 but XT65 replaced by TC65i-x and Trimble C1216 GPS

MTX-65+G-V5+B block diagram

MTX-H25+PLUS General Features CINTERION HC25 inside HSDPA/UMTS 850, 1900, 2100 MHz HSDPA data transmission max. 3.6 Mbps (DL), max. 384 kbps (UL) UMTS data transmission max. 384 kbps (DL), max. 384 kbps (UL) • EDGE/GPRS 850, 900, 1800, 1900 MHz EDGE data transmission class B, 10: max. 236,8 kpbs (DL), max. 118 kbps (UL) • GPRS multi-slot class 10 GPRS data transmission class B,10: max. 85.6 kbps (DL), max. 42.8 kbps (UL) • Improved power-saving modes - Power down 50 μA Average < 970mA (HSDPA data transfer) NDIS/USB driver for Microsoft® Windows® XP NDIS/RIL for Windows™ Mobile 5.0/6.0 ® Can be used with LINUX OS

MTX-H25+PLUS Extra RS232 serial port

MTX-H25+PLUS GPS (needs CMUX application) with SMA-F antenna connector

MTX-65-IND Terminal MTX-IND is a Industrial featured GSM-GPRS modem in a DIN-rail based and terminal block system connectors. Intended to use in industrial environment 2 RS232 - RS485 - RS422 internal jumper selection configurable bus 4 Relays 1P1C   250VAC-8A Input power 12-24 VAC or 12-30 VDC Optoisolated inputs & outputs TC65i inside

MTX-65-IND Terminal USB (mini B type) SPI/I2C expansion bus 4 optoisolated digital inputs 2 digital configurable inputs/outputs 2 analog 0-2.4V or 0-20mA configurable inputs SIM holder FME connector for GSM Antenna Internal expansion connector for internal communication cards Can acommodate Coronis Wavecard, for metering application

MTX-IND custom Concentrator for telemetry purpose. 220 AC power Coronis RF Wavecard IP65 housing

NEW UMTS TERMINAL MTX-HSDPA-EU3 Cinterion EU3 inside 1 serial port RS232 460Kbps. 1 USB port. Serial and USB simultaneously 900 MHz UMTS / 2100 MHz UMTS bands TCP-IP stack GPIO (4) and ADC In production

NEW UMTS TERMINAL MTX-HSDPA-EU3

NEW UMTS TERMINAL MTX-HSPA-PH8+G Cinterion PH8 inside HSPA+ 14.4Mbps UL– 5.76Mbps DL 1 serial port RS232 920Kbps. 1 USB port. Serial and USB simultaneously PH8: 850/800, AWS1700, 1900 and 2100 MHz PH8-P: 850/800, 900, 1900 and 2100 MHz UMTS bands TCP-IP stack Improved GPS, AGPS, storage of NMEA data Prototypes available

NEW UMTS TERMINAL MTX-HSPA-PH8+G

Applications

Competitive Advantages Small Size Weight light. Extra Input/Output and RS232-I2C-SPI ports on MTX65I Audio Interfaces. Voice & Data Simultaneously on 3G terminals (UMTS-HSDPA) Standard common connectors: RJ 12, D-Sub, USB, FME… TCP-IP stack integrated (MTX-65i /+G, MTX-EU3, MTX-PH8) High Quality Very competitive PRICE Full range of accessories available Custom design under request

MTX-TUNNEL MTX-TUNNEL is mainly an application running on MTX-65i, MTX-65ULP or MTX-IND similar as RS232-GPRS Gateway: all the data at the serial port is sent by GPRS and viceversa, in transparent mode.

MTX-TUNNEL V5 GPRS-SERIAL TUNNEL GPRS connection modes: WebServer TCP Client TCP Server UDP Client / Server GPRS connection modes: Permanent mode Under request (SMS or lost call, authorized or not phone numbers) Change on an input digital level An analog input is out of selected level window (MIN, MAX) Serial data present on RS232/RS485 port Scheduled date/hour timing WebServer Telnet

MTX-TUNNEL V5 SMS Alarms (digital input change detection) SMS Relay control IPs dynamic resolution: DynDNS Private DNS SMS SSL Security Firewall IP User API Telemetry: GPIOs & ADCs (GPRS, SMS, RF868MHz) GRPS-I2C/SPI tunnel Serial RS232/485 – HTTP tunnel Serial RS232/485 – SMS tunnel Timing synchronization

MTX-TUNNEL V5 – Sample scenarios Mode TCP Server, TCP client or UDP

MTX-TUNNEL V5 – Sample scenarios 2 RS232 devices with only 1 MTX-Tunnel & SIM Turn On/Off relays through GPRS or SMS

MTX-TUNNEL V5 – Sample scenarios Sending dynamic IP to DynDNS or Private DNS server

MTX-TUNNEL V5 – Sample scenarios Serial cable replacer RS232-GPRS-RS232 Gateway ModBusTCP / ModBus RTU (232/485)

MTX-TUNNEL V5 – Sample scenarios Metering aplications. GPRS-Wavenis concentrator

Others, Documentation, support Datasheet, manuals, drivers, etc on: Web page: http://www.matrix.es/mtx-terminals FTP site: ftp://ftp.matrixelectronica.eu/MTX-Terminals/ E-mail: gsmsupport@matrix.es 5 Application engineers European distribution network

Thank you. Feedback: gsmsupport@matrix.es