Case study: bevel gears (1) Established within the GROWTH project GRD1-1999-10748 "Improvement of Service Life and Reliability of Cold Forging Tools with.

Slides:

Advertisements

Similar presentations

Case study: sockets (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect.

Advertisements

CHAPTER 4: FRACTURE The separation or fragmentation of a solid body into two or more parts, under the action of stresses, is called fracture. Fracture.

ME 240: Introduction to Engineering Materials Chapter 8. Failure 8.1 CHAPTER 8.

Optimization of Laser Deposited Rapid Tooling D. Schwam and Y. Wang Case Western Reserve University NADCA DMC, Chicago – Feb.17,

NOTCH EFFECTS INTRODUCTION OF A NOTCH AFFECTS THE FRACTURE PROCESS Eg: INCREASES THE DUCTILE-BRITTLE TRANSITION TEMPERATURE OF STEEL NOTCH CREATES A LOCAL.

Case study: variable adjustment of inner diameter (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability.

Case study: tripods and cross-joints (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging.

Case study: starter pinions (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools.

Case study: spline profiles (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools.

Influence of Overload Induced Residual Stress Field on Fatigue Crack Growth in Aluminum Alloy Jinhee Park (M.S. Candidate) Date of joining Masters’ program.

Metal Forming Metal forming includes a large group of manufacturing processes in which plastic deformation is used to change the shape of metal work pieces.

7. Fatigue Fracture Fracture surface of a bicycle spoke made of 7075-T6 aluminum alloy 25 × magnification 100 × magnification.

Material Testing.

Lecture # 2 Allowable Stress Objective:

Chapter 5 – Design for Different Types of Loading

Volumetric Change of Repair Materials Low Shrinkage Materials.

Workshop A12-2 Fatigue: Strain-Life.

Chapter 6 Fatigue Failure Theories

Characterization of 1mm lead-free joints. Test results (DIC 2D)

© 2011 Autodesk Freely licensed for use by educational institutions. Reuse and changes require a note indicating that content has been modified from the.

Elastic Stress-Strain Relationships

Force Analysis – Spur Gears

Mechanical Properties

Materials - Metals Ken Youssefi PDM I, SJSU.

Msc. eng. Magdalena German Faculty of Civil Engineering Cracow University of Technology Budapest, Simulation of damage due to corrosion in RC.

Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage.

High strength materials are being increasingly used in designing critical components to save weight or meet difficult service conditions. Unfortunately.

Unit V Lecturer11 LECTURE-I  Introduction  Some important definitions  Stress-strain relation for different engineering materials.

Accuracy of Fully Elastic vs. Elastic-Plastic Finite Element Analysis Masters of Engineering Rensselear Polytechnic Institute By Nicholas Szwaja May 17,

Chapter 7 Fatigue Failure Resulting from Variable Loading

Failure Analysis of a Hollow Bar

Module 8 Overview of processes 1. Module 82 Metal forming Principle of the process Structure Process modeling Defects Design For Manufacturing (DFM) Process.

FRACTURE MECHANICS AND FATIGUE DESIGN HANS MF PANJAITAN Marinteknisk Senter Otto Nielsens Veg Trondheim Norway Mobile:

1 ME383 Modern Manufacturing Practices Lecture Note #3 Stress-Strain & Yield Criteria Dr. Y.B. Guo Mechanical Engineering The University of Alabama.

Cyclic plasticity and low-cycle fatigue (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold.

DESIGN FOR FATIGUE STRENGTH

Welding Design 1998/MJ1/MatJoin2/1 Design. Lesson Objectives When you finish this lesson you will understand: Mechanical and Physical Properties (structure.

Fatigue to Failure: FEA Predictions of Limit Conditions for Axial Fatigue Loading of Generic Coronary Stent Designs Prepared for ASTM F October.

FATIGUE Fatigue of Materials (Cambridge Solid State Science Series) S. Suresh Cambridge University Press, Cambridge (1998)

Case study: CV joint outer races (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging.

Registered Electrical & Mechanical Engineer

§7.3 Technical Properties of Construction Steels Tensile property  Stress-strain chart of soft steel  Strength  Plasticity Impact toughness Cold-bending.

Teaching Modules for Steel Instruction

Machine Design I (MCE-C 203) Mechatronics Dept., Faculty of Engineering, Fayoum University Dr. Ahmed Salah Abou Taleb Lecturer, Mechanical Engineering.

Jiangyu Li, University of Washington Yielding and Failure Criteria Plasticity Fracture Fatigue Jiangyu Li University of Washington Mechanics of Materials.

ME Manufacturing Systems Introduction To Manufacturing Systems by Ed Red Introduction To Manufacturing Systems by Ed Red.

1 Fracture Mechanics of Polymers B&R Ch , Fried 4.4 Testing methods of mechanical properties Static Transient Impact Cyclical.

Exam 2 Grade Distribution. Stress-strain behavior (Room T): Ideal vs Real Materials TS

1) Metal wires after cold work are usually sold in markets. Why? Increase yield strength This is called cold work strengthening. Tutorial (2)

Bachelor of Technology Mechanical Industrial Material UOG Lecture # 04 By: Jahangir Rana.

1. Overview of Metal Forming 2. Material Behavior in Metal Forming ©2007 John Wiley & Sons, Inc. M P Groover, Fundamentals of Modern Manufacturing 3/e.

Module 8 Overview of processes 1. Module 82 Metal forming Principle of the process Structure and configurtion Process modeling Defects Design For Manufacturing.

Principal Stresses and Strain and Theories of Failure Strength of Materials Prof. A. S. PATIL Department of Mechanical Engineering Sinhgad Academy of Engineering,

BIM Bridge Inspection and Maintenance Technical Standards Branch Class B Bridge Inspection Course Bridge Structural Considerations BASIC STRUCTURAL CONSIDERATIONS.

CONCEPTUAL DESIGN OF D2 MECHANICAL STRUCTURE (DOUBLE COLLARING OPTION) S. Farinon, P. Fabbricatore (INFN-Sezione di Genova) Sept. 24 th 2015.

Tensile strength of concrete

FRETTING FATIGUE OF INTERFERENCE FITTED SHAFTS by Peter Laczko

Methods to Maximize Design Life

Date of download: 12/27/2017 Copyright © ASME. All rights reserved.

4/19/2002, Wednesday Three Stages Fatigue Fracture

Mechanics of Materials Lab

( BDA 3033 ) CHAPTER 6 Theories of Elastic Failures

Tutorial in Mechanical Properties

( BDA 3033 ) CHAPTER 6 Theories of Elastic Failures

Mechanical Properties of Metals

Fatigue to Failure: FEA Predictions of Limit Conditions for Axial Fatigue Loading of Generic Coronary Stent Designs Part 2: Geometry 1 with EP correction.

FATIGUE FATIGUE Dr. Mohammed Abdulrazzaq

Mechanical Failure(파괴)

Presentation transcript:

Case study: bevel gears (1) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies Case study: Cold forging of bevel gear Cold forged bevel gearsSTRECON ® E + prestressed constainer for bevel gear dies

Case study: bevel gears (2) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies Typical failure mode bevel gear cracks along the fillets die insert strip- winding casing winding core

Case study: bevel gears (3) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies FE model of the tooling system winding core (carbide) windings and casing die A)conventional container with a double ring 0.6% interference B)STRECON ® Basic, 1.0% interference C)STRECON ® E +, 0.6% interference

Case study: bevel gears (4) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies Prestressing by a double stress ring at 0.6% interference Circumferential stresses at max. load  Risk of early crack initiation due to tensile stresses and large plastic strains Tangential stress-strain response Tangential stress in MPa Total strain in % 1500 MPa MPa Die life in production: 400

Case study: bevel gears (5) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies Prestressing by STRECON ® Basic at 1.0% interference Circumferential stresses at max. loadTangential stress-strain response 650 MPa  Reduced max. tensile stress, but still tensile stresses and plastic strains Tangential stress in MPa Total strain in % MPa Die life in production: 4.700

Case study: bevel gears (6) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies Prestressing by a STRECON ® E + at 0.6% interference  Improved fatigue life: no tensile stresses, reduced stress range and cyclic plastic strains Circumferential stresses at max. loadTangential stress-strain response 0 MPa MPa Tangential stress in MPa Total strain in % Die life in production: >70.000

Case study: bevel gears (7) Established within the GROWTH project GRD "Improvement of Service Life and Reliability of Cold Forging Tools with respect to Fatigue Damage due to Cyclic Plasticity (COLT)", funded by the European Community. COLT Design Manual for Cold Forging Dies Recommendations for the design of dies for the cold forging of bevel gears Recommended die material: Power-metallurgical tool steel (instead of carbide), provides an excellent fatigue strength Recommended prestressing system: STRECON ® E + reduces the stresses and cyclic plastic strains, leads to improved fatigue life, improves the accuracy by reducing the elastic expansion Example for very successful die life improvement: Die life improved by a factor of more than 10 Costs per part reduced by a factor of 9